Whirlpool Washer Error Codes - Appliance Fault Codes

The first thing to try is switching the Washer main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Whirlpool Washer not working?

Some Whirlpool Washer error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does CA mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an CA fault code, it is indicating a Current Limit Error has been detected by the internal self diagnostics system.

An CA Current Limit Error will set if the control board detects The average or instantaneous current limit was exceeded.

The most common issues that will cause an CA Current Limit Error to display on a Whirlpool Washer are:

Drive motor fault.
Thermal protector fault.
Motor controller fault.
Overloading the unit.

Try turning the Washer main power supply off for 1 minute. If the CA code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an CE fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE Communication Error will set if the control board detects Communication fault between the machine controller and the motor controller, “CE” flashes and the unit beeps once

The most common issues that will cause an CE Communication Error to display on a Whirlpool Washer are:

Drive motor fault.
Thermal protector fault.
Motor controller fault.
Main controller fault.

Try turning the Washer main power supply off for 1 minute. If the CE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CI mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an CI fault code, it is indicating a Current Limit Error has been detected by the internal self diagnostics system.

An CI Current Limit Error will set if the control board detects The average or instantaneous current limit was exceeded.

The most common issues that will cause an CI Current Limit Error to display on a Whirlpool Washer are:

Drive motor fault.
Thermal protector fault.
Motor controller fault.
Overloading the unit.

Try turning the Washer main power supply off for 1 minute. If the CI code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does dET mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an dET fault code, it is indicating a Detergent Cartridge Error has been detected by the internal self diagnostics system.

An dET Detergent Cartridge Error will set if the control board detects The detergent cartridge not detected in the dispenser.

The most common issues that will cause an dET Detergent Cartridge Error to display on a Whirlpool Washer are:

The dispenser cartridge is not inserted correctly.
The dispenser drawer is shut completely

Try turning the Washer main power supply off for 1 minute. If the dET code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does dr mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an dr fault code, it is indicating a Door Not Open Between Cycles Error has been detected by the internal self diagnostics system.

An dr Door Not Open Between Cycles Error will set if the control board detects The Appliance Control Unit cannot detect the door switch opening and closing properly.

The most common issues that will cause an dr Door Not Open Between Cycles Error to display on a Whirlpool Washer are:

The START button was pressed with the door open.
The START button was pressed a too many times without opening the door.
The door switch is defective.
The Appliance Control Unit is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the dr code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an E1 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E1 Thermistor Error will set if the control board detects Thermistor open

The most common issues that will cause an E1 Thermistor Error to display on a Whirlpool Washer are:

Thermistor fault.
Wiring or connection fault.
Main controller fault.

Try turning the Washer main power supply off for 1 minute. If the E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an E2 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E2 Thermistor Error will set if the control board detects Thermistor shorted

The most common issues that will cause an E2 Thermistor Error to display on a Whirlpool Washer are:

Thermistor fault.
Wiring or connection fault.
Main controller fault.

Try turning the Washer main power supply off for 1 minute. If the E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Er mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an Er fault code, it is indicating a Power Failure Error has been detected by the internal self diagnostics system.

An Er Power Failure Error will set if the control board detects Processor reset error

The most common issues that will cause an Er Power Failure Error to display on a Whirlpool Washer are:

This error code is displayed if the control failed to save cycle information during a power failure.

Try turning the Washer main power supply off for 1 minute. If the Er code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F0 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F0 fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.

An F0 Control Board Error will set if the control board detects Board failure

The most common issues that will cause an F0 Control Board Error to display on a Whirlpool Washer are:

Control board fault.

Try turning the Washer main power supply off for 1 minute. If the F0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F01 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F01 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F01 EEPROM Error will set if the control board detects Internal control board failure.

The most common issues that will cause an F01 EEPROM Error to display on a Whirlpool Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the F01 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F02 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F02 fault code, it is indicating a Long Drain Error has been detected by the internal self diagnostics system.

An F02 Long Drain Error will set if the control board detects The drain time has exceeded 8 minutes.

The most common issues that will cause an F02 Long Drain Error to display on a Whirlpool Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The main control panel is defective.
Loose wiring connection at the drain pump or main control

Try turning the Washer main power supply off for 1 minute. If the F02 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F05 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F05 fault code, it is indicating a Water Temperature Error has been detected by the internal self diagnostics system.

An F05 Water Temperature Error will set if the control board detects The water temperature sensor (NTC) value is out of range.

The most common issues that will cause an F05 Water Temperature Error to display on a Whirlpool Washer are:

Thermistor fault.
Wiring or connection fault.
Main controller fault.
Heating element fault

Try turning the Washer main power supply off for 1 minute. If the F05 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F06 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F06 fault code, it is indicating a Drive motor tachometer error has been detected by the internal self diagnostics system.

An F06 Drive motor tachometer error will set if the control board detects The control is unable to properly detect motor speed and the machine will shut down. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.

The most common issues that will cause an F06 Drive motor tachometer error to display on a Whirlpool Washer are:

Drive motor fault.
Motor controller fault.
Main controller fault.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F06 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F07 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F07 fault code, it is indicating a Motor Control Error has been detected by the internal self diagnostics system.

An F07 Motor Control Error will set if the control board detects The Central Control Unit has detected a short in the motor control unit. If a failure occurs during high-speed spin the door will be unlocked after 3 minutes.

The most common issues that will cause an F07 Motor Control Error to display on a Whirlpool Washer are:

Drive motor fault.
Motor controller fault.
Main controller fault.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F07 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F09 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F09 fault code, it is indicating a Overflow Error has been detected by the internal self diagnostics system.

An F09 Overflow Error will set if the control board detects The Overflow contact on the pressure switch is closed for more than 60 seconds. In an Overflow condition, the door will remain locked, and the drain pump will run constantly, even if PAUSE/CANCEL is pressed twice and the Display is cleared.

The most common issues that will cause an F09 Overflow Error to display on a Whirlpool Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The main control panel is defective.
Loose wiring connection at the drain pump or main control
Pressure switch or line fault.l

Try turning the Washer main power supply off for 1 minute. If the F09 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F1 fault code, it is indicating a Board failure has been detected by the internal self diagnostics system.

An F1 Board failure will set if the control board detects Internal clonal board fault

The most common issues that will cause an F1 Board failure to display on a Whirlpool Washer are:

Control board.

Try turning the Washer main power supply off for 1 minute. If the F1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F5 fault code, it is indicating a Board failure has been detected by the internal self diagnostics system.

An F5 Board failure will set if the control board detects

The most common issues that will cause an F5 Board failure to display on a Whirlpool Washer are:

Control board fault.

Try turning the Washer main power supply off for 1 minute. If the F5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7 fault code, it is indicating a Function key stuck on ERC has been detected by the internal self diagnostics system.

An F7 Function key stuck on ERC will set if the control board detects

The most common issues that will cause an F7 Function key stuck on ERC to display on a Whirlpool Washer are:

Control board fault.

Try turning the Washer main power supply off for 1 minute. If the F7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8 fault code, it is indicating a Board failure has been detected by the internal self diagnostics system.

An F8 Board failure will set if the control board detects

The most common issues that will cause an F8 Board failure to display on a Whirlpool Washer are:

Control board fault.

Try turning the Washer main power supply off for 1 minute. If the F8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F10 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F10 fault code, it is indicating a Motor Control Error has been detected by the internal self diagnostics system.

An F10 Motor Control Error will set if the control board detects The Motor Control Unit (MCU) heat sink thermal protector has tripped.

The most common issues that will cause an F10 Motor Control Error to display on a Whirlpool Washer are:

The unit is located too close to a source of heat. Wire harness connections to the MCU, motor or Central Control Unit (CCU).
Worn or failed drive system components.
MCU fault.
Motor fault.

Try turning the Washer main power supply off for 1 minute. If the F10 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F11 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F11 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F11 Communication Error will set if the control board detects Serial communication error between the Central Control Unit (CCU) and the Motor Control Unit (MCU).

The most common issues that will cause an F11 Communication Error to display on a Whirlpool Washer are:

Drive motor fault.
Motor controller fault.
Main controller fault.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F13 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F13 fault code, it is indicating a Dispenser Error has been detected by the internal self diagnostics system.

An F13 Dispenser Error will set if the control board detects The dispenser motor is not able to be driven to its proper position.

The most common issues that will cause an F13 Dispenser Error to display on a Whirlpool Washer are:

Mechanical linkage from dispenser motor to the top of the dispenser faulty.
Wire Harness connections to the dispenser motor or Central Control Unit (CCU) faulty.
Dispenser motor fault.

Try turning the Washer main power supply off for 1 minute. If the F13 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F14 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F14 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F14 Communication Error will set if the control board detects EEPROM error

The most common issues that will cause an F14 Communication Error to display on a Whirlpool Washer are:

Power supply voltage issue.
Main control fault.

Try turning the Washer main power supply off for 1 minute. If the F14 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F15 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F15 fault code, it is indicating a Motor Control Error has been detected by the internal self diagnostics system.

An F15 Motor Control Error will set if the control board detects Motor Control Unit (MCU) error

The most common issues that will cause an F15 Motor Control Error to display on a Whirlpool Washer are:

Drive motor fault.
Drive component fault.
Motor controller fault.
Main controller fault.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F15 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F20 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F20 fault code, it is indicating a Long Fill Error has been detected by the internal self diagnostics system.

An F20 Long Fill Error will set if the control board detects The washer is sensing a low flow of water.

The most common issues that will cause an F20 Long Fill Error to display on a Whirlpool Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The main PCB is defective.
Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the F20 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F21 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F21 fault code, it is indicating a Long Drain Error has been detected by the internal self diagnostics system.

An F21 Long Drain Error will set if the control board detects Indicates that drain times are longer than expected.

The most common issues that will cause an F21 Long Drain Error to display on a Whirlpool Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The main PCB is defective.
Loose wiring connection at the drain pump or main PCB

Try turning the Washer main power supply off for 1 minute. If the F21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F22 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F22 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F22 Door Lock Error will set if the control board detects The door can’t lock. Unplug the washer and check the door lock assembly for damage or a loose wiring connection. Clear any debris out of the door lock assembly. Replace the door/lock switch if defective.

The most common issues that will cause an F22 Door Lock Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F23 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F23 fault code, it is indicating a Wash Heater Error has been detected by the internal self diagnostics system.

An F23 Wash Heater Error will set if the control board detects The water temperature increase during the first 40 minutes is less than 86°F (30°C).

The most common issues that will cause an F23 Wash Heater Error to display on a Whirlpool Washer are:

The heating element is defective.
The Appliance Control Unit is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F23 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F24 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F24 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An F24 Thermistor Error will set if the control board detects The water temperature sensor (NTC) value is out of range (23°F to 217°F [-5°C to 103°C]) during the water-heating step of the WASH cycle.

The most common issues that will cause an F24 Thermistor Error to display on a Whirlpool Washer are:

Thermistor fault.
Wiring or connection fault.
Main controller fault.

Try turning the Washer main power supply off for 1 minute. If the F24 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F25 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F25 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F25 Motor Error will set if the control board detects The control is unable to properly detect motor speed.

The most common issues that will cause an F25 Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F25 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F26 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F26 fault code, it is indicating a Door or Lid Switch Error has been detected by the internal self diagnostics system.

An F26 Door or Lid Switch Error will set if the control board detects This code appears if the control does not detect the door opening after 3 consecutive loads, indicating that the door switch failed. The code also displays when the door switch is open with the door locked.

The most common issues that will cause an F26 Door or Lid Switch Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F26 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F27 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F27 fault code, it is indicating a Overflow Error has been detected by the internal self diagnostics system.

An F27 Overflow Error will set if the control board detects The water level is at or above the overfill level detected by the water level sensor.

The most common issues that will cause an F27 Overflow Error to display on a Whirlpool Washer are:

The washer has overfilled.
One of the water fill valves is stuck open or leaking.
Loose wire connection on the pressure switch terminal.
Loose wire connection on the PCB terminal.
Defective water level sensor.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F27 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F28 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F28 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F28 Communication Error will set if the control board detects Communication error between the main control board and motor control board

The most common issues that will cause an F28 Communication Error to display on a Whirlpool Washer are:

Faulty motor control board.
Faulty main control board.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F28 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F29 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F29 fault code, it is indicating a Door Unlock Error has been detected by the internal self diagnostics system.

An F29 Door Unlock Error will set if the control board detects The washer won’t unlock.

The most common issues that will cause an F29 Door Unlock Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F29 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F30 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F30 fault code, it is indicating a Dispenser Error has been detected by the internal self diagnostics system.

An F30 Dispenser Error will set if the control board detects The dispenser motor cannot be driven to its proper position.

The most common issues that will cause an F30 Dispenser Error to display on a Whirlpool Washer are:

Loose wire connection at the dispenser motor or main PCB.
The dispenser motor is defective.
The dispenser is jammed.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F30 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F31 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F31 fault code, it is indicating a Motor Control Error has been detected by the internal self diagnostics system.

An F31 Motor Control Error will set if the control board detects If the heat sink gets too hot, the Motor Control Unit (MCU) will stop the motor, the MCU will communicate this failure to the Central Control Unit (CCU), then the CCU will reset the MCU. If the condition continues four times, the F31 code will show.

The most common issues that will cause an F31 Motor Control Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F33 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F33 fault code, it is indicating a Drain Pump Drive Error has been detected by the internal self diagnostics system.

An F33 Drain Pump Drive Error will set if the control board detects When the connection between pump and the Central Control Unit (CCU) is lost.

The most common issues that will cause an F33 Drain Pump Drive Error to display on a Whirlpool Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The main PCB is defective.
Loose wiring connection at the drain pump or main PCB

Try turning the Washer main power supply off for 1 minute. If the F33 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F34 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F34 fault code, it is indicating a Clean Washer Cycle Error has been detected by the internal self diagnostics system.

An F34 Clean Washer Cycle Error will set if the control board detects Items were detected in the washer during the Clean Washer cycle.

The most common issues that will cause an F34 Clean Washer Cycle Error to display on a Whirlpool Washer are:

Something was left in the washer during the washer clean cycle.

Try turning the Washer main power supply off for 1 minute. If the F34 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E0 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F1-E0 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F1-E0 Communication Error will set if the control board detects EEPROM communication error

The most common issues that will cause an F1-E0 Communication Error to display on a Whirlpool Washer are:

Control board fault.

Try turning the Washer main power supply off for 1 minute. If the F1-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F0-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F0-E1 fault code, it is indicating a Clean Washer Cycle Error has been detected by the internal self diagnostics system.

An F0-E1 Clean Washer Cycle Error will set if the control board detects Items were detected in the washer during the Clean Washer cycle.

The most common issues that will cause an F0-E1 Clean Washer Cycle Error to display on a Whirlpool Washer are:

Something was left in the washer during the washer clean cycle.

Try turning the Washer main power supply off for 1 minute. If the F0-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F0-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F0-E2 fault code, it is indicating a Over Suds Error has been detected by the internal self diagnostics system.

An F0-E2 Over Suds Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

The most common issues that will cause an F0-E2 Over Suds Error to display on a Whirlpool Washer are:

Too much detergent been used.

Try turning the Washer main power supply off for 1 minute. If the F0-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F0-E5 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F0-E5 fault code, it is indicating a Off Balance Error has been detected by the internal self diagnostics system.

An F0-E5 Off Balance Error will set if the control board detects Drum imbalance or cabinet bump is detected during final spin.

The most common issues that will cause an F0-E5 Off Balance Error to display on a Whirlpool Washer are:

Extremely unbalanced load.
The wash tub is defective.
The motor or PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F0-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F1-E1 fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.

An F1-E1 Control Board Error will set if the control board detects Main Control Board Error

The most common issues that will cause an F1-E1 Control Board Error to display on a Whirlpool Washer are:

Main control board fault.

Try turning the Washer main power supply off for 1 minute. If the F1-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F1-E2 fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.

An F1-E2 Control Board Error will set if the control board detects Motor Control Board Error

The most common issues that will cause an F1-E2 Control Board Error to display on a Whirlpool Washer are:

Motor control board fault.

Try turning the Washer main power supply off for 1 minute. If the F1-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F2-E1 fault code, it is indicating a Stuck Key Error has been detected by the internal self diagnostics system.

An F2-E1 Stuck Key Error will set if the control board detects One of the buttons is stuck or held for over 15 seconds.

The most common issues that will cause an F2-E1 Stuck Key Error to display on a Whirlpool Washer are:

The control panel is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F2-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E3 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F2-E3 fault code, it is indicating a Main Control Board Mismatched Error has been detected by the internal self diagnostics system.

An F2-E3 Main Control Board Mismatched Error will set if the control board detects The user interface board does not match the value stored in the main control board.

The most common issues that will cause an F2-E3 Main Control Board Mismatched Error to display on a Whirlpool Washer are:

Faulty main control board.
Wrong main control board installed.
Faulty UI board.
Wrong UI board installed.

Try turning the Washer main power supply off for 1 minute. If the F2-E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E5 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F2-E5 fault code, it is indicating a User Interface Control Board Error has been detected by the internal self diagnostics system.

An F2-E5 User Interface Control Board Error will set if the control board detects The user interface board has an error.

The most common issues that will cause an F2-E5 User Interface Control Board Error to display on a Whirlpool Washer are:

Faulty UI board.
UI board wiring issue.

Try turning the Washer main power supply off for 1 minute. If the F2-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E6 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F2-E6 fault code, it is indicating a User Interface Control Board Error has been detected by the internal self diagnostics system.

An F2-E6 User Interface Control Board Error will set if the control board detects The user interface board has an error.

The most common issues that will cause an F2-E6 User Interface Control Board Error to display on a Whirlpool Washer are:

Faulty UI board.
UI board wiring issue.

Try turning the Washer main power supply off for 1 minute. If the F2-E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F3-E1 fault code, it is indicating a Pressure Sensor Error has been detected by the internal self diagnostics system.

An F3-E1 Pressure Sensor Error will set if the control board detects The water level sensor input signal is out of range.

The most common issues that will cause an F3-E1 Pressure Sensor Error to display on a Whirlpool Washer are:

Loose wire connection on the pressure switch terminal.
Loose wire connection on the PCB terminal.
Defective water level sensor.
Defective water level sensor hose.

Try turning the Washer main power supply off for 1 minute. If the F3-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F3-E2 fault code, it is indicating a Water Temperature Error has been detected by the internal self diagnostics system.

An F3-E2 Water Temperature Error will set if the control board detects Abnormal water temperature is sensed on the initial water supply.

The most common issues that will cause an F3-E2 Water Temperature Error to display on a Whirlpool Washer are:

The hot or cold water hose connection is incorrect.
The thermistor is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F3-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E5 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F3-E5 fault code, it is indicating a Dry Temperature Error has been detected by the internal self diagnostics system.

An F3-E5 Dry Temperature Error will set if the control board detects The dry temperature sensor is out of range.

The most common issues that will cause an F3-E5 Dry Temperature Error to display on a Whirlpool Washer are:

The thermistor is defective.
The main PCB is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F3-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E6 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F3-E6 fault code, it is indicating a Accelerometer Error has been detected by the internal self diagnostics system.

An F3-E6 Accelerometer Error will set if the control board detects The accelerometer failed self test or experienced an orientation error.

The most common issues that will cause an F3-E6 Accelerometer Error to display on a Whirlpool Washer are:

The Appliance Control Unit (ACU) is defective.

Try turning the Washer main power supply off for 1 minute. If the F3-E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F4-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F4-E1 fault code, it is indicating a Wash Heater Error has been detected by the internal self diagnostics system.

An F4-E1 Wash Heater Error will set if the control board detects The Appliance Control Unit cannot detect the temperature rise of the wash heater.

The most common issues that will cause an F4-E1 Wash Heater Error to display on a Whirlpool Washer are:

The heating element is defective.
The Appliance Control Unit is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F4-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F4-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F4-E2 fault code, it is indicating a Wash Heater Error has been detected by the internal self diagnostics system.

An F4-E2 Wash Heater Error will set if the control board detects The wash heater has not been turned on.

The most common issues that will cause an F4-E2 Wash Heater Error to display on a Whirlpool Washer are:

The heating element is defective.
The Appliance Control Unit is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F4-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F4-E4 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F4-E4 fault code, it is indicating a Vent Fan or Dry Blower Motor Error has been detected by the internal self diagnostics system.

An F4-E4 Vent Fan or Dry Blower Motor Error will set if the control board detects An open circuit or short circuit of Vent Fan or Dry Blower Motor is detected.

The most common issues that will cause an F4-E4 Vent Fan or Dry Blower Motor Error to display on a Whirlpool Washer are:

The Vent Fan or Dry Blower Motor is defective.
The Appliance Control Unit is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F4-E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F5-E1 fault code, it is indicating a Door or Lid Switch Error has been detected by the internal self diagnostics system.

An F5-E1 Door or Lid Switch Error will set if the control board detects This code appears if the control does not detect the door opening after 3 consecutive loads, indicating that the door switch failed. The code also displays when the door switch is open with the door locked.

The most common issues that will cause an F5-E1 Door or Lid Switch Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F5-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F5-E2 fault code, it is indicating a Door or Lid Lock Error has been detected by the internal self diagnostics system.

An F5-E2 Door or Lid Lock Error will set if the control board detects The door can’t lock. Unplug the washer and check the door lock assembly for damage or a loose wiring connection. Clear any debris out of the door lock assembly. Replace the door/lock switch if defective.

The most common issues that will cause an F5-E2 Door or Lid Lock Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F5-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E3 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F5-E3 fault code, it is indicating a Door or Lid Unlock Error has been detected by the internal self diagnostics system.

An F5-E3 Door or Lid Unlock Error will set if the control board detects The washer won’t unlock. Unplug the washer and check the door lock assembly for damage or a loose wiring connection. Replace the door/lock switch if defective.

The most common issues that will cause an F5-E3 Door or Lid Unlock Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F5-E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E4 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F5-E4 fault code, it is indicating a Door Not Open Between Cycles Error has been detected by the internal self diagnostics system.

An F5-E4 Door Not Open Between Cycles Error will set if the control board detects The Appliance Control Unit cannot detect the door switch opening and closing properly.

The most common issues that will cause an F5-E4 Door Not Open Between Cycles Error to display on a Whirlpool Washer are:

The START button was pressed with the door open.
The START button was pressed a too many times without opening the door.
The door switch is defective.
The Appliance Control Unit is defective.
Wiring or connection fault.

Try turning the Washer main power supply off for 1 minute. If the F5-E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E6 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F5-E6 fault code, it is indicating a Door or Lid Open Error has been detected by the internal self diagnostics system.

An F5-E6 Door or Lid Open Error will set if the control board detects Door is open, but latch is locked

The most common issues that will cause an F5-E6 Door or Lid Open Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F5-E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F6-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F6-E1 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F6-E1 Communication Error will set if the control board detects Communication error between the main control board and motor control board

The most common issues that will cause an F6-E1 Communication Error to display on a Whirlpool Washer are:

Faulty motor control board.
Faulty main control board.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F6-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F6-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F6-E2 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F6-E2 Communication Error will set if the control board detects Communication error between the main control board and the user interface control

The most common issues that will cause an F6-E2 Communication Error to display on a Whirlpool Washer are:

Faulty UI control board.
Faulty main control board.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F6-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F6-E3 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F6-E3 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F6-E3 Communication Error will set if the control board detects Communication error between the main control board and the user interface control

The most common issues that will cause an F6-E3 Communication Error to display on a Whirlpool Washer are:

Faulty UI control board.
Faulty main control board.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F6-E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E1 fault code, it is indicating a Motor or Basket Speed Sensing Error has been detected by the internal self diagnostics system.

An F7-E1 Motor or Basket Speed Sensing Error will set if the control board detects The motor can not achieve the correct speed for the cycle selection.

The most common issues that will cause an F7-E1 Motor or Basket Speed Sensing Error to display on a Whirlpool Washer are:

Faulty basket speed sensor.
Faulty motor control board.
Faulty drive motor.
Tub or bearing issue.
Shipping bolts have not been removed.
Washer has been overloaded.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E2 fault code, it is indicating a Motor Overheated Error has been detected by the internal self diagnostics system.

An F7-E2 Motor Overheated Error will set if the control board detects Motor or motor control board overheated

The most common issues that will cause an F7-E2 Motor Overheated Error to display on a Whirlpool Washer are:

Faulty motor control board.
Faulty drive motor.
Tub or bearing issue.
Shipping bolts have not been removed.
Washer has been overloaded.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E5 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E5 fault code, it is indicating a Shifter Error has been detected by the internal self diagnostics system.

An F7-E5 Shifter Error will set if the control board detects The main control cannot determine the position of the shifter.

The most common issues that will cause an F7-E5 Shifter Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty shift motor.
Faulty tub transmission.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E6 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E6 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-E6 Motor Error will set if the control board detects The main control has detected an open in a motor drive circuit.

The most common issues that will cause an F7-E6 Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E7 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E7 fault code, it is indicating a Motor Speed Error has been detected by the internal self diagnostics system.

An F7-E7 Motor Speed Error will set if the control board detects The motor can not achieve the correct speed for the cycle selection.

The most common issues that will cause an F7-E7 Motor Speed Error to display on a Whirlpool Washer are:

Faulty basket speed sensor.
Faulty motor control board.
Faulty drive motor.
Tub or bearing issue.
Shipping bolts have not been removed.
Washer has been overloaded.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E8 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E8 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-E8 Motor Error will set if the control board detects The Appliance Control Unit has detected a Motor Control/Over Temp Detected.

The most common issues that will cause an F7-E8 Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E9 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E9 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-E9 Motor Error will set if the control board detects The Appliance Control Unit has detected a Locked Motor Rotor.

The most common issues that will cause an F7-E9 Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E10 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E10 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-E10 Motor Error will set if the control board detects The Appliance Control Unit has detected a Motor Control/Lost Phase Fault.

The most common issues that will cause an F7-E10 Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E10 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E12 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-E12 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-E12 Motor Error will set if the control board detects The Appliance Control Unit has detected a Motor Control/Motor Overload Fault.

The most common issues that will cause an F7-E12 Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-E12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-EA mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-EA fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-EA Motor Error will set if the control board detects The Appliance Control Unit has detected a Motor Control/Lost Phase Fault.

The most common issues that will cause an F7-EA Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-EA code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-EC mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F7-EC fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An F7-EC Motor Error will set if the control board detects The Appliance Control Unit has detected a Motor Control/Motor Overload Fault.

The most common issues that will cause an F7-EC Motor Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty drive motor.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F7-EC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8-E0 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8-E0 fault code, it is indicating a Steam Valve Error has been detected by the internal self diagnostics system.

An F8-E0 Steam Valve Error will set if the control board detects The main control has detected an issue with the steam valve.

The most common issues that will cause an F8-E0 Steam Valve Error to display on a Whirlpool Washer are:

Faulty control board.
Faulty steam valve.
Wire harness or connection issue.

Try turning the Washer main power supply off for 1 minute. If the F8-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8-E1 fault code, it is indicating a Long Fill Error has been detected by the internal self diagnostics system.

An F8-E1 Long Fill Error will set if the control board detects The washer is sensing a low flow of water.

The most common issues that will cause an F8-E1 Long Fill Error to display on a Whirlpool Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The main PCB is defective.
Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the F8-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8-E2 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8-E2 fault code, it is indicating a Dispenser System Error has been detected by the internal self diagnostics system.

An F8-E2 Dispenser System Error will set if the control board detects Indicates there is a problem with the Dispenser System

The most common issues that will cause an F8-E2 Dispenser System Error to display on a Whirlpool Washer are:

The detergent drawer or detergent cartridge is clogged.

Try turning the Washer main power supply off for 1 minute. If the F8-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8-E3 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8-E3 fault code, it is indicating a Overflow Error has been detected by the internal self diagnostics system.

An F8-E3 Overflow Error will set if the control board detects The water level is at or above the overfill level detected by the water level sensor.

The most common issues that will cause an F8-E3 Overflow Error to display on a Whirlpool Washer are:

The washer has overfilled.
One of the water fill valves is stuck open or leaking.
Loose wire connection on the pressure switch terminal.
Loose wire connection on the PCB terminal.
Defective water level sensor.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the F8-E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8-E4 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8-E4 fault code, it is indicating a Low Water Error has been detected by the internal self diagnostics system.

An F8-E4 Low Water Error will set if the control board detects The washer is sensing a low flow of water.

The most common issues that will cause an F8-E4 Low Water Error to display on a Whirlpool Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The flow meter is defective.
The main PCB is defective.
Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the F8-E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8-E5 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F8-E5 fault code, it is indicating a Inlet Water Error has been detected by the internal self diagnostics system.

An F8-E5 Inlet Water Error will set if the control board detects Inlet water lines reversed

The most common issues that will cause an F8-E5 Inlet Water Error to display on a Whirlpool Washer are:

The inlet water lines are reversed.
The thermistor is defective.
The main PCB is defective.
Loose wire connection at the thermistor or main PCB.

Try turning the Washer main power supply off for 1 minute. If the F8-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F9-E1 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an F9-E1 fault code, it is indicating a Long Drain Error has been detected by the internal self diagnostics system.

An F9-E1 Long Drain Error will set if the control board detects Indicates that drain times are longer than expected, typically over eight (8) minutes.

The most common issues that will cause an F9-E1 Long Drain Error to display on a Whirlpool Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The main PCB is defective.
Loose wiring connection at the drain pump or main PCB

Try turning the Washer main power supply off for 1 minute. If the F9-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does FC-E0 mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an FC-E0 fault code, it is indicating a WiFi Error has been detected by the internal self diagnostics system.

An FC-E0 WiFi Error will set if the control board detects HMI cannot communicate with the WiFi module.

The most common issues that will cause an FC-E0 WiFi Error to display on a Whirlpool Washer are:

Check the user manual for WiFi setup instructions.

Try turning the Washer main power supply off for 1 minute. If the FC-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does FdL mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an FdL fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An FdL Door Lock Error will set if the control board detects The door can’t lock. Unplug the washer and check the door lock assembly for damage or a loose wiring connection. Clear any debris out of the door lock assembly. Replace the door/lock switch if defective.

The most common issues that will cause an FdL Door Lock Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the FdL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does FdU mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an FdU fault code, it is indicating a Door Unlock Error has been detected by the internal self diagnostics system.

An FdU Door Unlock Error will set if the control board detects The washer won’t unlock. Unplug the washer and check the door lock assembly for damage or a loose wiring connection. Replace the door/lock switch if defective.

The most common issues that will cause an FdU Door Unlock Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the FdU code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does FH mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an FH fault code, it is indicating a Long Fill Error has been detected by the internal self diagnostics system.

An FH Long Fill Error will set if the control board detects The washer is sensing a low flow of water.

The most common issues that will cause an FH Long Fill Error to display on a Whirlpool Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The main PCB is defective.
Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the FH code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does FL mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an FL fault code, it is indicating a Overflow Error has been detected by the internal self diagnostics system.

An FL Overflow Error will set if the control board detects The water level is at or above the overfill level detected by the water level sensor.

The most common issues that will cause an FL Overflow Error to display on a Whirlpool Washer are:

The washer has overfilled.
One of the water fill valves is stuck open or leaking.
Loose wire connection on the pressure switch terminal.
Loose wire connection on the PCB terminal.
Defective water level sensor.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the FL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Int mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an Int fault code, it is indicating a Cycle Paused or Canceled. has been detected by the internal self diagnostics system.

An Int Cycle Paused or Canceled. will set if the control board detects The washer cycle has been paused or canceled.

The most common issues that will cause an Int Cycle Paused or Canceled. to display on a Whirlpool Washer are:

The washer cycle was paused or canceled by the user. The washer may display Int and take 20 to 30 minutes to stop spinning and drain.
Press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute.

Try turning the Washer main power supply off for 1 minute. If the Int code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LC mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an LC fault code, it is indicating a Control Lock On has been detected by the internal self diagnostics system.

An LC Control Lock On will set if the control board detects The control lock is turned on

The most common issues that will cause an LC Control Lock On to display on a Whirlpool Washer are:

The control lock has been activated. Turn off the control lock.

Try turning the Washer main power supply off for 1 minute. If the LC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Ld mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an Ld fault code, it is indicating a Long Drain Error has been detected by the internal self diagnostics system.

An Ld Long Drain Error will set if the control board detects Indicates that drain times are longer than expected, typically over eight (8) minutes.

The most common issues that will cause an Ld Long Drain Error to display on a Whirlpool Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The main PCB is defective.
Loose wiring connection at the drain pump or main PCB

Try turning the Washer main power supply off for 1 minute. If the Ld code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LF mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an LF fault code, it is indicating a Long Fill Error has been detected by the internal self diagnostics system.

An LF Long Fill Error will set if the control board detects The washer is sensing a low flow of water.

The most common issues that will cause an LF Long Fill Error to display on a Whirlpool Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The main PCB is defective.
Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the LF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LO-FL mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an LO-FL fault code, it is indicating a Long Fill Error has been detected by the internal self diagnostics system.

An LO-FL Long Fill Error will set if the control board detects The washer is sensing a low flow of water.

The most common issues that will cause an LO-FL Long Fill Error to display on a Whirlpool Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The main PCB is defective.
Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the LO-FL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LOC mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an LOC fault code, it is indicating a Control Lock Enabled has been detected by the internal self diagnostics system.

An LOC Control Lock Enabled will set if the control board detects The control lock is turned on.

The most common issues that will cause an LOC Control Lock Enabled to display on a Whirlpool Washer are:

This is not an error code. Check the user manual for instructions to enable and disable the control lock function.

Try turning the Washer main power supply off for 1 minute. If the LOC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LS mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an LS fault code, it is indicating a Door or Lid Switch Error has been detected by the internal self diagnostics system.

An LS Door or Lid Switch Error will set if the control board detects This code appears if the control does not detect the door opening after 3 consecutive loads, indicating that the door switch failed. The code also displays when the door switch is open with the door locked.

The most common issues that will cause an LS Door or Lid Switch Error to display on a Whirlpool Washer are:

Loose wire connection at the door lock or main PCB.
The door lock is defective.
The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the LS code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does ob mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an ob fault code, it is indicating a Off Balance Error has been detected by the internal self diagnostics system.

An ob Off Balance Error will set if the control board detects Drum imbalance or cabinet bump is detected during final spin.

The most common issues that will cause an ob Off Balance Error to display on a Whirlpool Washer are:

Extremely unbalanced load.
The wash tub is defective.
The motor or PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the ob code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does PF mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an PF fault code, it is indicating a Power Failure has been detected by the internal self diagnostics system.

An PF Power Failure will set if the control board detects There is power failure during the wash or rinse operation.

The most common issues that will cause an PF Power Failure to display on a Whirlpool Washer are:

“PF” is not an error. It is to inform the user of power failure.

Try turning the Washer main power supply off for 1 minute. If the PF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does rL mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an rL fault code, it is indicating a Clean Washer Cycle Error has been detected by the internal self diagnostics system.

An rL Clean Washer Cycle Error will set if the control board detects Items were detected in the washer during the Clean Washer cycle.

The most common issues that will cause an rL Clean Washer Cycle Error to display on a Whirlpool Washer are:

Something was left in the washer during the washer clean cycle.

Try turning the Washer main power supply off for 1 minute. If the rL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Sd mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an Sd fault code, it is indicating a Over Suds Error has been detected by the internal self diagnostics system.

An Sd Over Suds Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

The most common issues that will cause an Sd Over Suds Error to display on a Whirlpool Washer are:

Too much detergent been used.

Try turning the Washer main power supply off for 1 minute. If the Sd code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does SL mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an SL fault code, it is indicating a Over Suds Error has been detected by the internal self diagnostics system.

An SL Over Suds Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

The most common issues that will cause an SL Over Suds Error to display on a Whirlpool Washer are:

Too much detergent been used.

Try turning the Washer main power supply off for 1 minute. If the SL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Sr mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an Sr fault code, it is indicating a Stuck Relay has been detected by the internal self diagnostics system.

An Sr Stuck Relay will set if the control board detects The motor relay is stuck in the closed position. The motor controller cannot be turned off by the machine controller.

The most common issues that will cause an Sr Stuck Relay to display on a Whirlpool Washer are:

Faulty machine control board.

Try turning the Washer main power supply off for 1 minute. If the Sr code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Sud mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an Sud fault code, it is indicating a Over Suds Error has been detected by the internal self diagnostics system.

An Sud Over Suds Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

The most common issues that will cause an Sud Over Suds Error to display on a Whirlpool Washer are:

Too much detergent been used.

Try turning the Washer main power supply off for 1 minute. If the Sud code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does SUDS mean on a Whirlpool Washer?

If your Whirlpool Washer is displaying an SUDS fault code, it is indicating a Over Suds Error has been detected by the internal self diagnostics system.

An SUDS Over Suds Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

The most common issues that will cause an SUDS Over Suds Error to display on a Whirlpool Washer are:

Too much detergent been used.

Try turning the Washer main power supply off for 1 minute. If the SUDS code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Whirlpool Washer Error Codes Disclaimer

The Whirlpool Washer Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.