Select form the list of Whirlpool Cooktop error codes below for the code meaning and possible issues that may be causing the fault to display.
The Whirlpool Cooktop error codes listed above may also apply to the following brands.
- Jenn-Air Cooktop error codes.
- KitchenAid Cooktop error codes.
Why is my Whirlpool Cooktop displaying error codes?
Your Whirlpool Cooktop will display error codes when the main control panel internal diagnostics system has detected a problem.
How can I reset Whirlpool Cooktop Error Codes
The first thing to try is switching the Cooktop main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.
If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.
Why is my Whirlpool Cooktop not working?
Some Whirlpool Cooktop error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.
What does C-81 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an C-81 fault code, it is indicating a Over Temperature Error has been detected by the internal self diagnostics system.
An C-81 Over Temperature Error will set if the control board detects The temperature of the cooktop is to high.
The most common issues that will cause an C-81 Over Temperature Error to display on a Whirlpool Cooktop are:
- The temperature sensor is defective.
- The Induction Power System is defective.
- Wiring issue between the top sensor and the Induction Power System.
- Ventilation issue..
Try turning the Cooktop main power supply off for 1 minute. If the C-81 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does C-82 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an C-82 fault code, it is indicating a Over Temperature Error has been detected by the internal self diagnostics system.
An C-82 Over Temperature Error will set if the control board detects The temperature of the cooktop is to high.
The most common issues that will cause an C-82 Over Temperature Error to display on a Whirlpool Cooktop are:
- The temperature sensor is defective.
- The Induction Power System is defective.
- Wiring issue between the top sensor and the Induction Power System.
- Ventilation issue..
Try turning the Cooktop main power supply off for 1 minute. If the C-82 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does C-83 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an C-83 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.
An C-83 Temperature Sensor Error will set if the control board detects The temperature Sensor is out of range.
The most common issues that will cause an C-83 Temperature Sensor Error to display on a Whirlpool Cooktop are:
- The temperature sensor / coil is defective.
- The Induction Power System is defective.
- Wiring issue between the temperature sensor / coil and the Induction Power System.
Try turning the Cooktop main power supply off for 1 minute. If the C-83 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-12 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-12 fault code, it is indicating a Coil Error has been detected by the internal self diagnostics system.
An F-12 Coil Error will set if the control board detects there is an issue with the burner coil under current.
The most common issues that will cause an F-12 Coil Error to display on a Whirlpool Cooktop are:
- The burner coil is defective.
- The Induction Power System is defective.
- Wiring issue between the Induction Power System and the burner coil.
Try turning the Cooktop main power supply off for 1 minute. If the F-12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-21 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-21 fault code, it is indicating a Supply Voltage Error has been detected by the internal self diagnostics system.
An F-21 Supply Voltage Error will set if the control board detects The power supply voltage is too high or too low.
The most common issues that will cause an F-21 Supply Voltage Error to display on a Whirlpool Cooktop are:
- The power supply voltage is too high.
- The power supply voltage is too low.
- The Induction Power System is defective.
Try turning the Cooktop main power supply off for 1 minute. If the F-21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-25 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-25 fault code, it is indicating a Inverter Fan Error has been detected by the internal self diagnostics system.
An F-25 Inverter Fan Error will set if the control board detects Inverter cooling fan motor cannot operate due to defects of PCB, wiring or motor blade disturbances.
The most common issues that will cause an F-25 Inverter Fan Error to display on a Whirlpool Cooktop are:
- The inverter cooling fan is defective.
- The inverter cooling fan blade is obstructed.
- The Induction Power System is defective.
- Wiring issue between the inverter cooling fan and the Induction Power System.
Try turning the Cooktop main power supply off for 1 minute. If the F-25 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-36 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-36 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.
An F-36 Temperature Sensor Error will set if the control board detects The temperature Sensor is out of range.
The most common issues that will cause an F-36 Temperature Sensor Error to display on a Whirlpool Cooktop are:
- The temperature sensor / coil is defective.
- The Induction Power System is defective.
- Wiring issue between the temperature sensor / coil and the Induction Power System.
Try turning the Cooktop main power supply off for 1 minute. If the F-36 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-37 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-37 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.
An F-37 Temperature Sensor Error will set if the control board detects The temperature Sensor is out of range.
The most common issues that will cause an F-37 Temperature Sensor Error to display on a Whirlpool Cooktop are:
- The temperature sensor / coil is defective.
- The Induction Power System is defective.
- Wiring issue between the temperature sensor / coil and the Induction Power System.
Try turning the Cooktop main power supply off for 1 minute. If the F-37 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-40 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-40 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.
An F-40 Communication Error will set if the control board detects There is a communication error between the User Interface and the Induction Power System.
The most common issues that will cause an F-40 Communication Error to display on a Whirlpool Cooktop are:
- The User Interface is defective.
- The Induction Power System is defective.
- Wiring issue between the User Interface and the Induction Power System.
Try turning the Cooktop main power supply off for 1 minute. If the F-40 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-42 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-42 fault code, it is indicating a Supply Voltage Error has been detected by the internal self diagnostics system.
An F-42 Supply Voltage Error will set if the control board detects The power supply voltage is too high or too low.
The most common issues that will cause an F-42 Supply Voltage Error to display on a Whirlpool Cooktop are:
- The power supply voltage is too high.
- The power supply voltage is too low.
- The Induction Power System is defective.
Try turning the Cooktop main power supply off for 1 minute. If the F-42 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-43 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-43 fault code, it is indicating a Supply Voltage Error has been detected by the internal self diagnostics system.
An F-43 Supply Voltage Error will set if the control board detects The power supply voltage is too low.
The most common issues that will cause an F-43 Supply Voltage Error to display on a Whirlpool Cooktop are:
- The power supply voltage is too high.
- The power supply voltage is too low.
- The Induction Power System is defective.
Try turning the Cooktop main power supply off for 1 minute. If the F-43 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-47 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-47 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.
An F-47 Communication Error will set if the control board detects There is a communication error between the User Interface and the Induction Power System.
The most common issues that will cause an F-47 Communication Error to display on a Whirlpool Cooktop are:
- The User Interface is defective.
- The Induction Power System is defective.
- Wiring issue between the User Interface and the Induction Power System.
Try turning the Cooktop main power supply off for 1 minute. If the F-47 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-56 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-56 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.
An F-56 Configuration Error will set if the control board detects Wrong or invalid configuration.
The most common issues that will cause an F-56 Configuration Error to display on a Whirlpool Cooktop are:
- The User Interface is defective.
Try turning the Cooktop main power supply off for 1 minute. If the F-56 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-58 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-58 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.
An F-58 Configuration Error will set if the control board detects Wrong or invalid configuration.
The most common issues that will cause an F-58 Configuration Error to display on a Whirlpool Cooktop are:
- The Induction Power System is defective.
Try turning the Cooktop main power supply off for 1 minute. If the F-58 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-60 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-60 fault code, it is indicating a User Interface Error has been detected by the internal self diagnostics system.
An F-60 User Interface Error will set if the control board detects The user interface has an internal error.
The most common issues that will cause an F-60 User Interface Error to display on a Whirlpool Cooktop are:
- The User Interface is defective.
Try turning the Cooktop main power supply off for 1 minute. If the F-60 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F-61 mean on a Whirlpool Cooktop?
If your Whirlpool Cooktop is displaying an F-61 fault code, it is indicating a Power Control Board Error has been detected by the internal self diagnostics system.
An F-61 Power Control Board Error will set if the control board detects The Power Control Board has an internal error.
The most common issues that will cause an F-61 Power Control Board Error to display on a Whirlpool Cooktop are:
- The Power Control Board is defective.
- Wiring or supply voltage issue.
Try turning the Cooktop main power supply off for 1 minute. If the F-61 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
Whirlpool Cooktop Error Codes Disclaimer
The Whirlpool Cooktop Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.