Samsung Oven Error Codes - Appliance Fault Codes

The first thing to try is switching the Oven main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Samsung Oven not working?

Some Samsung Oven error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does C-20 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-20 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An C-20 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is open or shorted.

The most common issues that will cause an C-20 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the C-20 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-21 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-21 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An C-21 Oven Temperature Sensor Error will set if the control board detects The oven sensor is open or over 2950 ohms

The most common issues that will cause an C-21 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the C-21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-22 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-22 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An C-22 Oven Temperature Sensor Error will set if the control board detects The oven sensor is shorted or under 940 ohms

The most common issues that will cause an C-22 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the C-22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-23 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-23 fault code, it is indicating a Meat Probe Error has been detected by the internal self diagnostics system.

An C-23 Meat Probe Error will set if the control board detects The meat probe is open or shorted.

The most common issues that will cause an C-23 Meat Probe Error to display on a Samsung Oven are:

The meat probe is defective.
The oven control PCB is defective.
Wiring issue between the meat probe and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the C-23 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-30 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-30 fault code, it is indicating a PCB Temperature Sensor Error has been detected by the internal self diagnostics system.

An C-30 PCB Temperature Sensor Error will set if the control board detects The PCB temperature sensor is open or shorted.

The most common issues that will cause an C-30 PCB Temperature Sensor Error to display on a Samsung Oven are:

The main PCB is defective.

Try turning the Oven main power supply off for 1 minute. If the C-30 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-31 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-31 fault code, it is indicating a PCB Over Temperature Error has been detected by the internal self diagnostics system.

An C-31 PCB Over Temperature Error will set if the control board detects The PCB temp sensor resistance is lower than 872 Ω.

The most common issues that will cause an C-31 PCB Over Temperature Error to display on a Samsung Oven are:

The main PCB is defective.

Try turning the Oven main power supply off for 1 minute. If the C-31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-A2 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-A2 fault code, it is indicating a Motor operation error has been detected by the internal self diagnostics system.

An C-A2 Motor operation error will set if the control board detects The cooling fan or air intake fan motor is not functioning.

The most common issues that will cause an C-A2 Motor operation error to display on a Samsung Oven are:

The air intake fan motor is defective.
The cooling fan motor is defective.
The main PCB is defective.
Wiring issue between the cooling or air intake fan motor and the main PCB.

Try turning the Oven main power supply off for 1 minute. If the C-A2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-d0 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-d0 fault code, it is indicating a Shorted Key Error has been detected by the internal self diagnostics system.

An C-d0 Shorted Key Error will set if the control board detects Any button is stuck or held for more than 10 seconds.

The most common issues that will cause an C-d0 Shorted Key Error to display on a Samsung Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the C-d0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-d1 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-d1 fault code, it is indicating a Door Locking Error has been detected by the internal self diagnostics system.

An C-d1 Door Locking Error will set if the control board detects The door is not locked 1 minute after the lock (self-clean) function is initiated.

The most common issues that will cause an C-d1 Door Locking Error to display on a Samsung Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the C-d1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-F0 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-F0 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An C-F0 Communication Error will set if the control board detects There is a communication error between the main PCB and the sub PCB.

The most common issues that will cause an C-F0 Communication Error to display on a Samsung Oven are:

The main PCB is defective.
The sub PCB is defective.
Wiring issue between the main PCB and the sub PCB.

Try turning the Oven main power supply off for 1 minute. If the C-F0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C-F2 mean on a Samsung Oven?

If your Samsung Oven is displaying an C-F2 fault code, it is indicating a Communication Error. has been detected by the internal self diagnostics system.

An C-F2 Communication Error. will set if the control board detects There is a communication error between the main PCB and the touch PCB.

The most common issues that will cause an C-F2 Communication Error. to display on a Samsung Oven are:

The main PCB is defective.
The touch PCB is defective.
Wiring issue between the main PCB and the sub PCB.

Try turning the Oven main power supply off for 1 minute. If the C-F2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does dC mean on a Samsung Oven?

If your Samsung Oven is displaying an dC fault code, it is indicating a Partition Switch Error has been detected by the internal self diagnostics system.

An dC Partition Switch Error will set if the control board detects The partition plate is not in place.

The most common issues that will cause an dC Partition Switch Error to display on a Samsung Oven are:

The partition switch is defective.
The oven control PCB is defective.
Wiring issue between the partition switch and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the dC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does dE mean on a Samsung Oven?

If your Samsung Oven is displaying an dE fault code, it is indicating a Partition Switch Error has been detected by the internal self diagnostics system.

An dE Partition Switch Error will set if the control board detects The partition plate is not in place.

The most common issues that will cause an dE Partition Switch Error to display on a Samsung Oven are:

The partition switch is defective.
The oven control PCB is defective.
Wiring issue between the partition switch and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the dE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-08 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-08 fault code, it is indicating a Oven Heating Error has been detected by the internal self diagnostics system.

An E-08 Oven Heating Error will set if the control board detects The temperature of the oven can not reach 100 ̊F (38 ̊C) within 10 minutes after the oven starts.

The most common issues that will cause an E-08 Oven Heating Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.
One of the oven elements open.
Wiring issue between our of the elements and the main PCB

Try turning the Oven main power supply off for 1 minute. If the E-08 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-0A mean on a Samsung Oven?

If your Samsung Oven is displaying an E-0A fault code, it is indicating a Oven Overheating Error has been detected by the internal self diagnostics system.

An E-0A Oven Overheating Error will set if the control board detects The temperature of the oven is higher than 650 ̊F (343 ̊c) while oven is on and not in self-cleaning mode.

The most common issues that will cause an E-0A Oven Overheating Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-0A code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-0C mean on a Samsung Oven?

If your Samsung Oven is displaying an E-0C fault code, it is indicating a Partition Switch Error has been detected by the internal self diagnostics system.

An E-0C Partition Switch Error will set if the control board detects The partition plate is not in place.

The most common issues that will cause an E-0C Partition Switch Error to display on a Samsung Oven are:

The partition switch is defective.
The oven control PCB is defective.
Wiring issue between the partition switch and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-0C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-0E mean on a Samsung Oven?

If your Samsung Oven is displaying an E-0E fault code, it is indicating a Door Locking Error has been detected by the internal self diagnostics system.

An E-0E Door Locking Error will set if the control board detects The door is not locked 1 minute after the lock (self-clean) function is initiated.

The most common issues that will cause an E-0E Door Locking Error to display on a Samsung Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-0E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-21 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-21 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An E-21 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is open or over 2950Ω.

The most common issues that will cause an E-21 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-22 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-22 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An E-22 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is shorted or under 930Ω.

The most common issues that will cause an E-22 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-24 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-24 fault code, it is indicating a Oven Overheating Error has been detected by the internal self diagnostics system.

An E-24 Oven Overheating Error will set if the control board detects The temperature of the oven is higher than 650 ̊F (343 ̊c) while oven is on and not in self-cleaning mode.

The most common issues that will cause an E-24 Oven Overheating Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-24 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-27 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-27 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An E-27 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is open or over 2950Ω.

The most common issues that will cause an E-27 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-27 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-28 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-28 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An E-28 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is shorted or under 930Ω.

The most common issues that will cause an E-28 Oven Temperature Sensor Error to display on a Samsung Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-28 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-2E mean on a Samsung Oven?

If your Samsung Oven is displaying an E-2E fault code, it is indicating a Meat Probe Error has been detected by the internal self diagnostics system.

An E-2E Meat Probe Error will set if the control board detects The meat probe is open or shorted.

The most common issues that will cause an E-2E Meat Probe Error to display on a Samsung Oven are:

The meat probe is defective.
The oven control PCB is defective.
Wiring issue between the meat probe and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the E-2E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-83 mean on a Samsung Oven?

If your Samsung Oven is displaying an E-83 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-83 Communication Error will set if the control board detects There is a communication error between the main PCB and the sub PCB.

The most common issues that will cause an E-83 Communication Error to display on a Samsung Oven are:

The main PCB is defective.
The sub PCB is defective.
Wiring issue between the main PCB and the sub PCB.

Try turning the Oven main power supply off for 1 minute. If the E-83 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does SE mean on a Samsung Oven?

If your Samsung Oven is displaying an SE fault code, it is indicating a Shorted Key Error has been detected by the internal self diagnostics system.

An SE Shorted Key Error will set if the control board detects Any button is stuck or held for more than 10 seconds.

The most common issues that will cause an SE Shorted Key Error to display on a Samsung Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the SE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does tE mean on a Samsung Oven?

If your Samsung Oven is displaying an tE fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An tE Communication Error will set if the control board detects There is a communication between the oven control PCB and the keypad.

The most common issues that will cause an tE Communication Error to display on a Samsung Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the tE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Samsung Oven Error Codes Disclaimer

The Samsung Oven Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.