Samsung Cooktop Error Codes

Select form the list of Samsung Cooktop error codes below for the code meaning and possible issues that may be causing the fault to display.

A2
bo
C1
C2
C3
C4
CE
CE-00
CE-01
CE-02
CE-03
CE-11
cE56
CO
d0
E-53
E-54
E-55
E-56
E-81
E-83
E-84
E-85
F0
F1
F2
FL
LE
ot
Ou
SE
T4
tE
to
UP
Samsung Cooktop Error Codes

Why is my Samsung Cooktop displaying error codes?

Your Samsung Cooktop will display error codes when the main control panel internal diagnostics system has detected a problem.

How can I reset Samsung Cooktop Error Codes

The first thing to try is switching the Cooktop main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Samsung Cooktop not working?

Some Samsung Cooktop error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does A2 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an A2 fault code, it is indicating a Inverter Fan Error has been detected by the internal self diagnostics system.

An A2 Inverter Fan Error will set if the control board detects Inverter cooling fan motor cannot operate due to defects of PCB, wiring or motor blade disturbances.

The most common issues that will cause an A2 Inverter Fan Error to display on a Samsung Cooktop are:

  • The inverter cooling fan is defective.
  • The inverter cooling fan blade is obstructed.
  • The inverter PCB is defective.
  • Wiring issue between the inverter cooling fan and the inverter PCB.

Try turning the Cooktop main power supply off for 1 minute. If the A2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does bo mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an bo fault code, it is indicating a IGBT Sensor Error has been detected by the internal self diagnostics system.

An bo IGBT Sensor Error will set if the control board detects The IGBT Sensor is open.

The most common issues that will cause an bo IGBT Sensor Error to display on a Samsung Cooktop are:

  • The IGBT sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.

Try turning the Cooktop main power supply off for 1 minute. If the bo code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C1 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an C1 fault code, it is indicating a OverTemperature Error has been detected by the internal self diagnostics system.

An C1 OverTemperature Error will set if the control board detects The temperature of the cooktop surface is higher than 250 ̊C.

The most common issues that will cause an C1 OverTemperature Error to display on a Samsung Cooktop are:

  • The top sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.
  • Empty cookware is on the cooktop.

Try turning the Cooktop main power supply off for 1 minute. If the C1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C2 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an C2 fault code, it is indicating a IGBT Sensor Error has been detected by the internal self diagnostics system.

An C2 IGBT Sensor Error will set if the control board detects The IGBT Sensor is open or shorted.

The most common issues that will cause an C2 IGBT Sensor Error to display on a Samsung Cooktop are:

  • The IGBT sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.

Try turning the Cooktop main power supply off for 1 minute. If the C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C3 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an C3 fault code, it is indicating a PCB Temperature Sensor Error has been detected by the internal self diagnostics system.

An C3 PCB Temperature Sensor Error will set if the control board detects The PCB temp sensor resistance is abnormal.

The most common issues that will cause an C3 PCB Temperature Sensor Error to display on a Samsung Cooktop are:

  • The main PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the C3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does C4 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an C4 fault code, it is indicating a PCB Temperature Sensor Error has been detected by the internal self diagnostics system.

An C4 PCB Temperature Sensor Error will set if the control board detects The PCB temp sensor resistance is abnormal.

The most common issues that will cause an C4 PCB Temperature Sensor Error to display on a Samsung Cooktop are:

  • The main PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the C4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CE fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE Communication Error will set if the control board detects There is a communication error between the display PCB and the inverter PCB.

The most common issues that will cause an CE Communication Error to display on a Samsung Cooktop are:

  • The display PCB is defective.
  • The inverter PCB is defective.
  • Wiring issue between the display PCB and the inverter PCB.

Try turning the Cooktop main power supply off for 1 minute. If the CE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE-00 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CE-00 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE-00 Communication Error will set if the control board detects No communication between the left of right touch PCB and the left or right inverter PCB.

The most common issues that will cause an CE-00 Communication Error to display on a Samsung Cooktop are:

  • The left or right induction PCB is defective.
  • The left or right induction PCB fuse is open.
  • No 240V supply voltage at the left or right induction PCB
  • The left or right touch PCB is defective.
  • Wiring issue between the left or right induction PCB and the left or right touch PCB.

Try turning the Cooktop main power supply off for 1 minute. If the CE-00 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE-01 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CE-01 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE-01 Communication Error will set if the control board detects No communication between the left of right touch PCB and the left or right inverter PCB.

The most common issues that will cause an CE-01 Communication Error to display on a Samsung Cooktop are:

  • The left or right induction PCB is defective.
  • The left or right induction PCB fuse is open.
  • No 240V supply voltage at the left or right induction PCB
  • The left or right touch PCB is defective.
  • Wiring issue between the left or right induction PCB and the left or right touch PCB.

Try turning the Cooktop main power supply off for 1 minute. If the CE-01 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE-02 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CE-02 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE-02 Communication Error will set if the control board detects No communication between the left of right touch PCB and the left or right inverter PCB.

The most common issues that will cause an CE-02 Communication Error to display on a Samsung Cooktop are:

  • The left or right induction PCB is defective.
  • The left or right induction PCB fuse is open.
  • No 240V supply voltage at the left or right induction PCB
  • The left or right touch PCB is defective.
  • Wiring issue between the left or right induction PCB and the left or right touch PCB.

Try turning the Cooktop main power supply off for 1 minute. If the CE-02 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE-03 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CE-03 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE-03 Communication Error will set if the control board detects No communication between the left of right touch PCB and the left or right inverter PCB.

The most common issues that will cause an CE-03 Communication Error to display on a Samsung Cooktop are:

  • The left or right induction PCB is defective.
  • The left or right induction PCB fuse is open.
  • No 240V supply voltage at the left or right induction PCB
  • The left or right touch PCB is defective.
  • Wiring issue between the left or right induction PCB and the left or right touch PCB.

Try turning the Cooktop main power supply off for 1 minute. If the CE-03 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CE-11 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CE-11 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An CE-11 Communication Error will set if the control board detects There is no communication between the oven Control PCB and the main Induction PCB (Right side inverter)

The most common issues that will cause an CE-11 Communication Error to display on a Samsung Cooktop are:

  • The main induction PCB is defective.
  • The main induction PCB fuse is open.
  • No 240V supply voltage at the main induction PCB
  • The oven control PCB is defective.
  • Wiring issue between the main induction PCB and the oven control PCB.

Try turning the Cooktop main power supply off for 1 minute. If the CE-11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does cE56 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an cE56 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An cE56 Communication Error will set if the control board detects Oven Control to Induction System Communication Error (Power and Inverter)

The most common issues that will cause an cE56 Communication Error to display on a Samsung Cooktop are:

  • The main induction PCB is defective.
  • The main induction PCB fuse is open.
  • No 240V supply voltage at the main induction PCB
  • The inverter PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the cE56 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CO mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an CO fault code, it is indicating a Top Sensor Error has been detected by the internal self diagnostics system.

An CO Top Sensor Error will set if the control board detects The top sensor is open or shorted.

The most common issues that will cause an CO Top Sensor Error to display on a Samsung Cooktop are:

  • The top sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.
  • Room temperature is below -10 ̊C.

Try turning the Cooktop main power supply off for 1 minute. If the CO code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does d0 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an d0 fault code, it is indicating a Touch Button Error has been detected by the internal self diagnostics system.

An d0 Touch Button Error will set if the control board detects A control panel touch sensor is shorted or stuck.

The most common issues that will cause an d0 Touch Button Error to display on a Samsung Cooktop are:

  • Liquid on the control panel.
  • One or more keys have been held down for over 8 seconds.
  • The touch PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the d0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-53 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-53 fault code, it is indicating a EEPROM error has been detected by the internal self diagnostics system.

An E-53 EEPROM error will set if the control board detects CPU fails to read or write data.

The most common issues that will cause an E-53 EEPROM error to display on a Samsung Cooktop are:

  • The main PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the E-53 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-54 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-54 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-54 Communication Error will set if the control board detects Oven Control to Induction System Communication Error (Power and Inverter)

The most common issues that will cause an E-54 Communication Error to display on a Samsung Cooktop are:

  • The oven control PCB is defective.
  • Wiring issue at the oven control PCB.

Try turning the Cooktop main power supply off for 1 minute. If the E-54 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-55 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-55 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-55 Communication Error will set if the control board detects Communication Error Touch Signal Not Entered

The most common issues that will cause an E-55 Communication Error to display on a Samsung Cooktop are:

  • The glass touch panel is defective.
  • The oven control PCB is defective.
  • Wiring issue between the glass touch panel and the oven control PCB.

Try turning the Cooktop main power supply off for 1 minute. If the E-55 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-56 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-56 fault code, it is indicating a Warning Error has been detected by the internal self diagnostics system.

An E-56 Warning Error will set if the control board detects A cooktop part has had an error.

The most common issues that will cause an E-56 Warning Error to display on a Samsung Cooktop are:

  • When an error has occurred to a cooktop part the oven will display this error code and stop oven operation. Cycle the power to the oven. This should solve the problem.

Try turning the Cooktop main power supply off for 1 minute. If the E-56 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-81 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-81 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-81 Communication Error will set if the control board detects No communication between the oven control PCB and the oven power relay PCB.

The most common issues that will cause an E-81 Communication Error to display on a Samsung Cooktop are:

  • The oven control PCB is defective.
  • The oven power relay PCB is defective.
  • Wiring issue between the oven control PCB and the oven power relay PCB.

Try turning the Cooktop main power supply off for 1 minute. If the E-81 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-83 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-83 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-83 Communication Error will set if the control board detects No communication between the oven control PCB and the oven power relay PCB.

The most common issues that will cause an E-83 Communication Error to display on a Samsung Cooktop are:

  • The oven control PCB is defective.
  • The oven power relay PCB is defective.
  • Wiring issue between the oven control PCB and the oven power relay PCB.

Try turning the Cooktop main power supply off for 1 minute. If the E-83 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-84 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-84 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-84 Communication Error will set if the control board detects There is no communication between the oven Control PCB and the main Induction PCB (Right side inverter)

The most common issues that will cause an E-84 Communication Error to display on a Samsung Cooktop are:

  • The main induction PCB is defective.
  • The main induction PCB fuse is open.
  • No 240V supply voltage at the main induction PCB
  • The oven control PCB is defective.
  • Wiring issue between the main induction PCB and the oven control PCB.

Try turning the Cooktop main power supply off for 1 minute. If the E-84 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E-85 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an E-85 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E-85 Communication Error will set if the control board detects There is no communication between the oven Control PCB and the glass touch panel

The most common issues that will cause an E-85 Communication Error to display on a Samsung Cooktop are:

  • The glass touch panel is defective.
  • The oven control PCB is defective.
  • Wiring issue between the glass touch panel and the oven control PCB.

Try turning the Cooktop main power supply off for 1 minute. If the E-85 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F0 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an F0 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F0 Communication Error will set if the control board detects There is a communication error between the display PCB and the inverter PCB.

The most common issues that will cause an F0 Communication Error to display on a Samsung Cooktop are:

  • The display PCB is defective.
  • The inverter PCB is defective.
  • Wiring issue between the display PCB and the inverter PCB.

Try turning the Cooktop main power supply off for 1 minute. If the F0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an F1 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F1 EEPROM Error will set if the control board detects There is a communication error between the main PCB and EEP-ROM.

The most common issues that will cause an F1 EEPROM Error to display on a Samsung Cooktop are:

  • The main PCB is defective.
  • The sub PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the F1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an F2 fault code, it is indicating a Touch key data Information Error has been detected by the internal self diagnostics system.

An F2 Touch key data Information Error will set if the control board detects The touch-enabled IC communication is abnormally.

The most common issues that will cause an F2 Touch key data Information Error to display on a Samsung Cooktop are:

  • The touch PCB or display PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the F2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does FL mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an FL fault code, it is indicating a Inverter Fan Error has been detected by the internal self diagnostics system.

An FL Inverter Fan Error will set if the control board detects Inverter cooling fan motor cannot operate due to defects of PCB, wiring or motor blade disturbances.

The most common issues that will cause an FL Inverter Fan Error to display on a Samsung Cooktop are:

  • The inverter cooling fan is defective.
  • The inverter cooling fan blade is obstructed.
  • The inverter PCB is defective.
  • Wiring issue between the inverter cooling fan and the inverter PCB.

Try turning the Cooktop main power supply off for 1 minute. If the FL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LE mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an LE fault code, it is indicating a Low Voltage Error has been detected by the internal self diagnostics system.

An LE Low Voltage Error will set if the control board detects 12V DC supply has dropped under 9V.

The most common issues that will cause an LE Low Voltage Error to display on a Samsung Cooktop are:

  • Low voltage supplied to the oven
  • The inverter PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the LE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does ot mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an ot fault code, it is indicating a OverTemperature Error has been detected by the internal self diagnostics system.

An ot OverTemperature Error will set if the control board detects The temperature of the cooktop surface is higher than 250 ̊C.

The most common issues that will cause an ot OverTemperature Error to display on a Samsung Cooktop are:

  • The top sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.
  • Empty cookware is on the cooktop.

Try turning the Cooktop main power supply off for 1 minute. If the ot code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Ou mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an Ou fault code, it is indicating a Pan Detection Error has been detected by the internal self diagnostics system.

An Ou Pan Detection Error will set if the control board detects No cookware has been detected on the cooking zone.

The most common issues that will cause an Ou Pan Detection Error to display on a Samsung Cooktop are:

  • There is no cookware on the cooking surface.
  • The cookware is unsuitable or too small for induction cooking.
  • The inverter PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the Ou code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does SE mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an SE fault code, it is indicating a Touch Button Error has been detected by the internal self diagnostics system.

An SE Touch Button Error will set if the control board detects A control panel touch sensor is shorted or stuck.

The most common issues that will cause an SE Touch Button Error to display on a Samsung Cooktop are:

  • Liquid on the control panel.
  • One or more keys have been held down for over 8 seconds.
  • The touch PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the SE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does T4 mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an T4 fault code, it is indicating a Top Sensor Short Error has been detected by the internal self diagnostics system.

An T4 Top Sensor Short Error will set if the control board detects The top sensor is shorted.

The most common issues that will cause an T4 Top Sensor Short Error to display on a Samsung Cooktop are:

  • The top sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.
  • Room temperature is below -10 ̊C.

Try turning the Cooktop main power supply off for 1 minute. If the T4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does tE mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an tE fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An tE Communication Error will set if the control board detects There is no communication between the oven Control PCB and the glass touch panel

The most common issues that will cause an tE Communication Error to display on a Samsung Cooktop are:

  • The glass touch panel is defective.
  • The oven control PCB is defective.
  • Wiring issue between the glass touch panel and the oven control PCB.

Try turning the Cooktop main power supply off for 1 minute. If the tE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does to mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an to fault code, it is indicating a Top Sensor Open Error has been detected by the internal self diagnostics system.

An to Top Sensor Open Error will set if the control board detects The top sensor is open.

The most common issues that will cause an to Top Sensor Open Error to display on a Samsung Cooktop are:

  • The top sensor is defective.
  • The inverter PCB is defective.
  • Wiring issue between the top sensor and the inverter PCB.
  • Room temperature is below -10 ̊C.

Try turning the Cooktop main power supply off for 1 minute. If the to code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does UP mean on a Samsung Cooktop?

If your Samsung Cooktop is displaying an UP fault code, it is indicating a Supply Voltage Error has been detected by the internal self diagnostics system.

An UP Supply Voltage Error will set if the control board detects The power supply voltage is too high or too low.

The most common issues that will cause an UP Supply Voltage Error to display on a Samsung Cooktop are:

  • The power supply voltage is too high.
  • The power supply voltage is too low.
  • The inverter PCB is defective.

Try turning the Cooktop main power supply off for 1 minute. If the UP code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Samsung Cooktop Error Codes Disclaimer

The Samsung Cooktop Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.