Electrolux Dishwasher Error Codes

Select form the list of Electrolux Dishwasher error codes below for the code meaning and possible issues that may be causing the fault to display.

1-24
CE
CL
ER
ER/CE
ER/ER
ER/uF
ER/uo
HO
Hs
i00
i10
i11
i20
i30
i40
i50
i60
i70
i80
i81
i90
i91
i92
i93
i94
i95
iB0
iC0
iC1
iC2
iC3
iD0
iD1
iE0
iF0
iF1
iFo
LO
PF
RA
RE
RF
Tu
uF
uo
Electrolux Dishwasher Error Codes

The Electrolux Dishwasher error codes listed above may also apply to the following brands.

  • AEG Dishwasher error codes.
  • Anova Dishwasher error codes.
  • Frigidaire Dishwasher error codes.
  • Westinghouse Dishwasher error codes.
  • Zanussi Dishwasher error codes.

Why is my Electrolux Dishwasher displaying error codes?

Your Electrolux Dishwasher will display error codes when the main control panel internal diagnostics system has detected a problem.

How can I reset Electrolux Dishwasher Error Codes

The first thing to try is switching the Dishwasher main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Electrolux Dishwasher not working?

Some Electrolux Dishwasher error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does 1-24 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an 1-24 fault code, it is indicating a Delayed Start has been detected by the internal self diagnostics system.

An 1-24 Delayed Start will set if the control board detects The dishwasher is in delay start mode.

The most common issues that will cause an 1-24 Delayed Start to display on an Electrolux Dishwasher are:

  • Press the delay start button until the delay is at the desired time or off.

Try turning the Dishwasher main power supply off for 1 minute. If the 1-24 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does a CE error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an CE fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An CE Configuration Error will set if the control board detects Configuration error between the user interface and main PCB.

The most common issues that will cause an CE Configuration Error to display on an Electrolux Dishwasher are:

  • The user interface is defective.
  • The main PCB is defective.
  • Wiring issue between the user interface and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the CE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does a CL error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an CL fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

An CL Door Open Error will set if the control board detects The door is open.

The most common issues that will cause an CL Door Open Error to display on an Electrolux Dishwasher are:

  • The door is not closed.
  • The door lock switch is defective.
  • The wire harness is defective.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the CL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an ER error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an ER fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An ER Communication Error will set if the control board detects Communication error between the user interface and main PCB.

The most common issues that will cause an ER Communication Error to display on an Electrolux Dishwasher are:

  • The user interface is defective.
  • The main PCB is defective.
  • Wiring issue between the user interface and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the ER code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an ER/CE error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an ER/CE fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An ER/CE Configuration Error will set if the control board detects Configuration error between the user interface and main PCB.

The most common issues that will cause an ER/CE Configuration Error to display on an Electrolux Dishwasher are:

  • The user interface is defective.
  • The main PCB is defective.
  • Wiring issue between the user interface and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the ER/CE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an ER/ER error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an ER/ER fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An ER/ER Communication Error will set if the control board detects Communication error between the user interface and main PCB.

The most common issues that will cause an ER/ER Communication Error to display on an Electrolux Dishwasher are:

  • The user interface is defective.
  • The main PCB is defective.
  • Wiring issue between the user interface and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the ER/ER code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an ER/uF error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an ER/uF fault code, it is indicating a Fan Motor Error has been detected by the internal self diagnostics system.

An ER/uF Fan Motor Error will set if the control board detects The fan motor speed is less than expected.

The most common issues that will cause an ER/uF Fan Motor Error to display on an Electrolux Dishwasher are:

  • The fan blade is jammed.
  • The fan motor is defective.
  • Loose wire connectors.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the ER/uF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an ER/uo error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an ER/uo fault code, it is indicating a Vent Error has been detected by the internal self diagnostics system.

An ER/uo Vent Error will set if the control board detects The vent will not close.

The most common issues that will cause an ER/uo Vent Error to display on an Electrolux Dishwasher are:

  • The vent is jammed.
  • The vent is defective.
  • Loose wire connectors.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the ER/uo code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an HO error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an HO fault code, it is indicating a Water Temperature Error has been detected by the internal self diagnostics system.

An HO Water Temperature Error will set if the control board detects The water temperature can’t reach the defined value after a predetermined amount of time.

The most common issues that will cause an HO Water Temperature Error to display on an Electrolux Dishwasher are:

  • The suppled water is too cold.
  • The heater is defective.
  • The thermistor is defective.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the HO code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an Hs error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an Hs fault code, it is indicating a Circulation Pump Error has been detected by the internal self diagnostics system.

An Hs Circulation Pump Error will set if the control board detects The circulation pump is not turning on.

The most common issues that will cause an Hs Circulation Pump Error to display on an Electrolux Dishwasher are:

  • The circulation pump is defective.
  • The circulation pump wire harness is defective.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the Hs code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i00 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i00 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An i00 PCB Error will set if the control board detects Low voltage detected.

The most common issues that will cause an i00 PCB Error to display on an Electrolux Dishwasher are:

  • Low supply voltage.
  • The user interface is defective.
  • The main PCB is defective.
  • Wiring issue between the user interface and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the i00 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i10 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i10 fault code, it is indicating a No Fill Error has been detected by the internal self diagnostics system.

An i10 No Fill Error will set if the control board detects The water level defined is not reached within the time limit set.

The most common issues that will cause an i10 No Fill Error to display on an Electrolux Dishwasher are:

  • Low water supply.
  • The water inlet valve is defective.
  • The water level sensor is defective.
  • The main PCB is defective.
  • Wiring issue.

Try turning the Dishwasher main power supply off for 1 minute. If the i10 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i11 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i11 fault code, it is indicating a No Fill Error has been detected by the internal self diagnostics system.

An i11 No Fill Error will set if the control board detects The water level defined is not reached within the time limit set.

The most common issues that will cause an i11 No Fill Error to display on an Electrolux Dishwasher are:

  • Low water supply.
  • The water inlet valve is defective.
  • The water level sensor is defective.
  • The main PCB is defective.
  • Wiring issue.

Try turning the Dishwasher main power supply off for 1 minute. If the i11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i20 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i20 fault code, it is indicating a Drain Error has been detected by the internal self diagnostics system.

An i20 Drain Error will set if the control board detects The dishwasher will not drain.

The most common issues that will cause an i20 Drain Error to display on an Electrolux Dishwasher are:

  • The drain pump is defective.
  • The drain is plugged
  • Wiring issue between the drain pump and the main PCB
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i20 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i30 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i30 fault code, it is indicating a Water Leak Error has been detected by the internal self diagnostics system.

An i30 Water Leak Error will set if the control board detects Water has accumulated in the bottom leak tray under the dishwasher.

The most common issues that will cause an i30 Water Leak Error to display on an Electrolux Dishwasher are:

  • Over sud issue due to the wrong type of detergent being used.
  • The dishwasher is not level.
  • The door is not closing properly.
  • The flood sensor micro switch is defective.
  • The pressure sensor is defective.
  • The main PCB is defective.
  • The drain pump is jammed or defective.
  • The dishwasher is overfilling.
  • The inlet valve is leaking.
  • The sump is leaking.
  • The wash pump is leaking.
  • A hose is leaking.
  • The drain hose is plugged.

Try turning the Dishwasher main power supply off for 1 minute. If the i30 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i40 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i40 fault code, it is indicating a Drain Error has been detected by the internal self diagnostics system.

An i40 Drain Error will set if the control board detects The dishwasher will not drain

The most common issues that will cause an i40 Drain Error to display on an Electrolux Dishwasher are:

  • The drain pump is defective.
  • The drain is plugged
  • Wiring issue between the drain pump and the main PCB
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i40 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i50 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i50 fault code, it is indicating a Circulation Pump Error has been detected by the internal self diagnostics system.

An i50 Circulation Pump Error will set if the control board detects The circulation pump amperage draw is abnormal.

The most common issues that will cause an i50 Circulation Pump Error to display on an Electrolux Dishwasher are:

  • The circulation pump is defective.
  • The circulation pump wire harness is defective.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i50 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i60 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i60 fault code, it is indicating a Water Temperature Error has been detected by the internal self diagnostics system.

An i60 Water Temperature Error will set if the control board detects The water temperature can’t reach the defined value after a predetermined amount of time.

The most common issues that will cause an i60 Water Temperature Error to display on an Electrolux Dishwasher are:

  • The suppled water is too cold.
  • The heater is defective.
  • The thermistor is defective.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i60 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does an i70 error code mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i70 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An i70 Thermistor Error will set if the control board detects NTC sensor value out of range.

The most common issues that will cause an i70 Thermistor Error to display on an Electrolux Dishwasher are:

  • The temperature sensor (thermistor) is not connected to the wire harness.
  • The temperature sensor (thermistor) is defective.
  • The Main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i70 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i80 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i80 fault code, it is indicating a Door Error has been detected by the internal self diagnostics system.

An i80 Door Error will set if the control board detects Auto door opener malfunction.

The most common issues that will cause an i80 Door Error to display on an Electrolux Dishwasher are:

  • The door latch or switch is defective.
  • Wiring issue.
  • The Main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i80 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i81 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i81 fault code, it is indicating a Door Error has been detected by the internal self diagnostics system.

An i81 Door Error will set if the control board detects Auto door opener malfunction warning.

The most common issues that will cause an i81 Door Error to display on an Electrolux Dishwasher are:

  • The door latch or switch is defective.
  • Wiring issue.
  • The Main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i81 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i90 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i90 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An i90 Configuration Error will set if the control board detects Configuration Problem

The most common issues that will cause an i90 Configuration Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The power board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i90 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i91 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i91 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An i91 Configuration Error will set if the control board detects Checksum MCF

The most common issues that will cause an i91 Configuration Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The power board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i91 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i92 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i92 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An i92 Configuration Error will set if the control board detects Checksum CCF

The most common issues that will cause an i92 Configuration Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The power board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i92 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i93 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i93 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An i93 Configuration Error will set if the control board detects Checksum UIDATA

The most common issues that will cause an i93 Configuration Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The power board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i93 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i94 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i94 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An i94 Configuration Error will set if the control board detects UIDATA version mismatch

The most common issues that will cause an i94 Configuration Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The power board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i94 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does i95 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an i95 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An i95 Configuration Error will set if the control board detects UIDATA checksum mismatch

The most common issues that will cause an i95 Configuration Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The power board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the i95 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iB0 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iB0 fault code, it is indicating a Turbidity Sensor Error has been detected by the internal self diagnostics system.

An iB0 Turbidity Sensor Error will set if the control board detects The error is set if the calibration procedure is not completed after 15 sec.

The most common issues that will cause an iB0 Turbidity Sensor Error to display on an Electrolux Dishwasher are:

  • The turbidity sensor is defective.
  • Wiring issue.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iB0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iC0 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iC0 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An iC0 Communication Error will set if the control board detects User interface communication error.

The most common issues that will cause an iC0 Communication Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The main board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iC0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iC1 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iC1 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An iC1 Communication Error will set if the control board detects MACS bus communication error.

The most common issues that will cause an iC1 Communication Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The main board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iC2 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iC2 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An iC2 Communication Error will set if the control board detects ADSI communication error.

The most common issues that will cause an iC2 Communication Error to display on an Electrolux Dishwasher are:

  • The UI board is defective.
  • Wiring issue.
  • The main board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iC2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iC3 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iC3 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An iC3 Communication Error will set if the control board detects Communication error between the power board and the Motor Control Board

The most common issues that will cause an iC3 Communication Error to display on an Electrolux Dishwasher are:

  • The power board is defective.
  • Wiring issue.
  • The motor control board is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iC3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iD0 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iD0 fault code, it is indicating a Tacho Error has been detected by the internal self diagnostics system.

An iD0 Tacho Error will set if the control board detects If the washing pump is activated but there is no tacho signal for 30 seconds then the motor speed is set to full speed and the heating element is not activated.

The most common issues that will cause an iD0 Tacho Error to display on an Electrolux Dishwasher are:

  • The wash pump is defective.
  • Wiring issue.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iD0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iD1 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iD1 fault code, it is indicating a Tacho Error has been detected by the internal self diagnostics system.

An iD1 Tacho Error will set if the control board detects If the washing pump is activated but there is no tacho signal for 5 seconds then the heating element is temporarily deactivated.

The most common issues that will cause an iD1 Tacho Error to display on an Electrolux Dishwasher are:

  • The wash pump is defective.
  • Wiring issue.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iD1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iE0 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iE0 fault code, it is indicating a Flow Control Position Error has been detected by the internal self diagnostics system.

An iE0 Flow Control Position Error will set if the control board detects The error is signalled if the desired position of the flow controller is not reached after 120 seconds; the heating element is deactivated.

The most common issues that will cause an iE0 Flow Control Position Error to display on an Electrolux Dishwasher are:

  • The flow control valve is defective.
  • Wiring issue.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iE0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iF0 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iF0 fault code, it is indicating a Overfill Error has been detected by the internal self diagnostics system.

An iF0 Overfill Error will set if the control board detects The error situation is recognized when the total filling times exceed the limits.

The most common issues that will cause an iF0 Overfill Error to display on an Electrolux Dishwasher are:

  • The drain pump is defective.
  • The pressure sensor is defective.
  • The drain is plugged
  • The flow control valve is defective.
  • Wiring issue between the drain pump and the main PCB
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iF0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iF1 mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iF1 fault code, it is indicating a Overfill Error has been detected by the internal self diagnostics system.

An iF1 Overfill Error will set if the control board detects The error condition is recognized if the safety water level is exceeded for more than 4 seconds.

The most common issues that will cause an iF1 Overfill Error to display on an Electrolux Dishwasher are:

  • The drain pump is defective.
  • The pressure sensor is defective.
  • The drain is plugged
  • The flow control valve is defective.
  • Wiring issue between the drain pump and the main PCB
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iF1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does iFo mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an iFo fault code, it is indicating a Drain Error has been detected by the internal self diagnostics system.

An iFo Drain Error will set if the control board detects The dishwasher will not drain

The most common issues that will cause an iFo Drain Error to display on an Electrolux Dishwasher are:

  • The drain pump is defective.
  • The pressure sensor is defective.
  • The drain is plugged
  • The flow control valve is defective.
  • Wiring issue between the drain pump and the main PCB
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the iFo code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does LO mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an LO fault code, it is indicating a Low Rinse Aid Error has been detected by the internal self diagnostics system.

An LO Low Rinse Aid Error will set if the control board detects The rinse aid dispenser is empty.

The most common issues that will cause an LO Low Rinse Aid Error to display on an Electrolux Dishwasher are:

  • The rinse aid dispenser is empty.
  • The rinse aid dispenser is defective.
  • The main PCB is defective.
  • Wiring issue between the rinse aid dispenser and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the LO code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does PF mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an PF fault code, it is indicating a Power Failure has been detected by the internal self diagnostics system.

An PF Power Failure will set if the control board detects Indicates that there has been a power failure to dishwasher.

The most common issues that will cause an PF Power Failure to display on an Electrolux Dishwasher are:

  • Press the START/CANCEL pad and the dishwasher will function normally.

Try turning the Dishwasher main power supply off for 1 minute. If the PF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does RA mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an RA fault code, it is indicating a Rinse Aid Reed Switch Error has been detected by the internal self diagnostics system.

An RA Rinse Aid Reed Switch Error will set if the control board detects The rinse aid reed switch circuit is open or shorted.

The most common issues that will cause an RA Rinse Aid Reed Switch Error to display on an Electrolux Dishwasher are:

  • The detergent dispenser is defective.
  • The main PCB is defective.
  • Wiring issue between the detergent dispenser and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the RA code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does RE mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an RE fault code, it is indicating a Rinse Aid Reed Switch Error has been detected by the internal self diagnostics system.

An RE Rinse Aid Reed Switch Error will set if the control board detects The rinse aid reed switch circuit is shorted.

The most common issues that will cause an RE Rinse Aid Reed Switch Error to display on an Electrolux Dishwasher are:

  • The detergent dispenser is defective.
  • The main PCB is defective.
  • Wiring issue between the detergent dispenser and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the RE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does RF mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an RF fault code, it is indicating a Rinse Aid Reed Switch Error has been detected by the internal self diagnostics system.

An RF Rinse Aid Reed Switch Error will set if the control board detects The rinse aid reed switch circuit is open.

The most common issues that will cause an RF Rinse Aid Reed Switch Error to display on an Electrolux Dishwasher are:

  • The detergent dispenser is defective.
  • The main PCB is defective.
  • Wiring issue between the detergent dispenser and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the RF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Tu mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an Tu fault code, it is indicating a Turbidity Sensor Error has been detected by the internal self diagnostics system.

An Tu Turbidity Sensor Error will set if the control board detects The turbidity sensor signal is abnormal.

The most common issues that will cause an Tu Turbidity Sensor Error to display on an Electrolux Dishwasher are:

  • The turbidity sensor is defective.
  • The main PCB is defective.
  • Wiring issue between the turbidity sensor and the main PCB

Try turning the Dishwasher main power supply off for 1 minute. If the Tu code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does uF mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an uF fault code, it is indicating a Fan Motor Error has been detected by the internal self diagnostics system.

An uF Fan Motor Error will set if the control board detects The fan motor speed is less than expected.

The most common issues that will cause an uF Fan Motor Error to display on an Electrolux Dishwasher are:

  • The fan blade is jammed.
  • The fan motor is defective.
  • Loose wire connectors.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the uF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does uo mean on an Electrolux Dishwasher?

If your Electrolux Dishwasher is displaying an uo fault code, it is indicating a Vent Error has been detected by the internal self diagnostics system.

An uo Vent Error will set if the control board detects The vent will not close.

The most common issues that will cause an uo Vent Error to display on an Electrolux Dishwasher are:

  • The vent is jammed.
  • The vent is defective.
  • Loose wire connectors.
  • The main PCB is defective.

Try turning the Dishwasher main power supply off for 1 minute. If the uo code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Electrolux Dishwasher Error Codes Disclaimer

The Electrolux Dishwasher Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.