Electrolux Dryer Error Codes - Appliance Fault Codes

The first thing to try is switching the Dryer main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Electrolux Dryer not working?

Some Electrolux Dryer error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does C9 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an C9 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An C9 Communication Error will set if the control board detects There is a communication error between the main board and the UI board.

The most common issues that will cause an C9 Communication Error to display on an Electrolux Dryer are:

Loose wire connection between control boards.
A control board is defective.

Try turning the Dryer main power supply off for 1 minute. If the C9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E4 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E4 fault code, it is indicating a Humidity Error has been detected by the internal self diagnostics system.

An E4 Humidity Error will set if the control board detects The humidity sensor signal is abnormal.

The most common issues that will cause an E4 Humidity Error to display on an Electrolux Dryer are:

The sensor is defective.
Wiring or connection failure.
The main board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E5 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E5 Thermistor Error will set if the control board detects The outlet thermistor resistance is very high or open.

The most common issues that will cause an E5 Thermistor Error to display on an Electrolux Dryer are:

The thermistor is defective.
The main Board id defective.
Loose wiring connection at the thermistor or main Board.

Try turning the Dryer main power supply off for 1 minute. If the E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E9C mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E9C fault code, it is indicating a User Interface Configuration Checksum Error has been detected by the internal self diagnostics system.

An E9C User Interface Configuration Checksum Error will set if the control board detects Software problem between Main Board and UI Board.

The most common issues that will cause an E9C User Interface Configuration Checksum Error to display on an Electrolux Dryer are:

Loose wire connection at the main board or UI board.
The main board is defective.
The UI board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E9C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E9E mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E9E fault code, it is indicating a User Interface Touch Sensor Error has been detected by the internal self diagnostics system.

An E9E User Interface Touch Sensor Error will set if the control board detects User Interface Touch Sensor Not Working.

The most common issues that will cause an E9E User Interface Touch Sensor Error to display on an Electrolux Dryer are:

Humidity or water on User Interface Board.
User Interface Board defective.

Try turning the Dryer main power supply off for 1 minute. If the E9E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E31 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E31 fault code, it is indicating a Moisture Sensor Error has been detected by the internal self diagnostics system.

An E31 Moisture Sensor Error will set if the control board detects The moisture sensor feedback frequency is too high.

The most common issues that will cause an E31 Moisture Sensor Error to display on an Electrolux Dryer are:

The sensor bars are dirty.
The sensor bars are defective.
Wiring or connection failure.
The main board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E32 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E32 fault code, it is indicating a Moisture Sensor Error has been detected by the internal self diagnostics system.

An E32 Moisture Sensor Error will set if the control board detects The moisture sensor feedback frequency is too low.

The most common issues that will cause an E32 Moisture Sensor Error to display on an Electrolux Dryer are:

The sensor bars are dirty.
The sensor bars are defective.
Wiring or connection failure.
The main board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E32 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E41 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E41 fault code, it is indicating a Door Error has been detected by the internal self diagnostics system.

An E41 Door Error will set if the control board detects The door is open when the dryer is started.

The most common issues that will cause an E41 Door Error to display on an Electrolux Dryer are:

The door is open.
The door switch is defective.
The main Board is defective.
Loose wiring connection at the door switch or main Board.

Try turning the Dryer main power supply off for 1 minute. If the E41 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E42 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E42 fault code, it is indicating a Door Error has been detected by the internal self diagnostics system.

An E42 Door Error will set if the control board detects The door is open when the dryer is started.

The most common issues that will cause an E42 Door Error to display on an Electrolux Dryer are:

The door is open.
The door switch is defective.
The main Board is defective.
Loose wiring connection at the door switch or main Board.

Try turning the Dryer main power supply off for 1 minute. If the E42 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E51 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E51 fault code, it is indicating a Drum Motor Relay Error has been detected by the internal self diagnostics system.

An E51 Drum Motor Relay Error will set if the control board detects With Line Safe Relay closed, motor sensing detects voltage on motor.

The most common issues that will cause an E51 Drum Motor Relay Error to display on an Electrolux Dryer are:

Motor short circuit to ground (motor or wiring).
Electrical noise.
Main board failure.
Motor relay open or short.

Try turning the Dryer main power supply off for 1 minute. If the E51 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E52 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E52 fault code, it is indicating a Drum Motor Start Sensing Error has been detected by the internal self diagnostics system.

An E52 Drum Motor Start Sensing Error will set if the control board detects Motor Relay driven but start sensing not congruent.

The most common issues that will cause an E52 Drum Motor Start Sensing Error to display on an Electrolux Dryer are:

Motor overheating.
Laundry load too heavy.
Low power supply.
Motor or Wiring defective.
Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the E52 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E53 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E53 fault code, it is indicating a Drum Motor Centrifugal Switch Error has been detected by the internal self diagnostics system.

An E53 Drum Motor Centrifugal Switch Error will set if the control board detects Motor driven but sensing not congruent.

The most common issues that will cause an E53 Drum Motor Centrifugal Switch Error to display on an Electrolux Dryer are:

Motor centrifugal switch.
Wiring defective.
Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the E53 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E54 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E54 fault code, it is indicating a Drum Motor Sensing Error has been detected by the internal self diagnostics system.

An E54 Drum Motor Sensing Error will set if the control board detects Drum Motor Relay Sensing Circuit Failure

The most common issues that will cause an E54 Drum Motor Sensing Error to display on an Electrolux Dryer are:

Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the E54 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E61 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E61 fault code, it is indicating a Heater Relay Error has been detected by the internal self diagnostics system.

An E61 Heater Relay Error will set if the control board detects The heater relay is stuck open or closed.

The most common issues that will cause an E61 Heater Relay Error to display on an Electrolux Dryer are:

Heater relay.
Wiring defective.

Try turning the Dryer main power supply off for 1 minute. If the E61 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E63 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E63 fault code, it is indicating a Heater Short Error has been detected by the internal self diagnostics system.

An E63 Heater Short Error will set if the control board detects The heater circuit is shorted.

The most common issues that will cause an E63 Heater Short Error to display on an Electrolux Dryer are:

The heating element is defective.
Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the E63 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E64 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E64 fault code, it is indicating a Heater Open Error has been detected by the internal self diagnostics system.

An E64 Heater Open Error will set if the control board detects The heater circuit is open.

The most common issues that will cause an E64 Heater Open Error to display on an Electrolux Dryer are:

The heating element is defective.
Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the E64 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E65 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E65 fault code, it is indicating a Thermostat Open Error has been detected by the internal self diagnostics system.

An E65 Thermostat Open Error will set if the control board detects The thermostat circuit is open.

The most common issues that will cause an E65 Thermostat Open Error to display on an Electrolux Dryer are:

High vent restriction.
Laundry load too heavy.
The high-limit thermostat is defective.
Wiring defective.
The inlet thermal limiter is tripped.

Try turning the Dryer main power supply off for 1 minute. If the E65 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E66 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E66 fault code, it is indicating a Thermal Limit Open Error has been detected by the internal self diagnostics system.

An E66 Thermal Limit Open Error will set if the control board detects The thermal limit fuse is open and requires replacement. The dryer may have overheated. The cause of the overheating issue will need to be repaired or the thermal limit fuse may open again.

The most common issues that will cause an E66 Thermal Limit Open Error to display on an Electrolux Dryer are:

The dryer vent is restricted.
The thermostat is defective.
The thermistor is defective.
The main board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E66 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E67 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E67 fault code, it is indicating a Heater Sensing Error has been detected by the internal self diagnostics system.

An E67 Heater Sensing Error will set if the control board detects Heater Sensing Error

The most common issues that will cause an E67 Heater Sensing Error to display on an Electrolux Dryer are:

Main board failure.
Wiring defective.

Try turning the Dryer main power supply off for 1 minute. If the E67 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E71 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E71 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E71 Thermistor Error will set if the control board detects The outlet thermistor resistance is very high or open.

The most common issues that will cause an E71 Thermistor Error to display on an Electrolux Dryer are:

The thermistor is defective.
The main Board id defective.
Loose wiring connection at the thermistor or main Board.

Try turning the Dryer main power supply off for 1 minute. If the E71 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E72 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E72 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E72 Thermistor Error will set if the control board detects The outlet thermistor resistance is very low or shorted.

The most common issues that will cause an E72 Thermistor Error to display on an Electrolux Dryer are:

The thermistor is defective.
The main Board id defective.

Try turning the Dryer main power supply off for 1 minute. If the E72 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E73 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E73 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E73 Thermistor Error will set if the control board detects The inlet thermistor resistance is very high or open.

The most common issues that will cause an E73 Thermistor Error to display on an Electrolux Dryer are:

The thermistor is defective.
The main Board id defective.
Loose wiring connection at the thermistor or main Board.

Try turning the Dryer main power supply off for 1 minute. If the E73 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E74 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E74 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

An E74 Thermistor Error will set if the control board detects The thermistor resistance is very low or shorted.

The most common issues that will cause an E74 Thermistor Error to display on an Electrolux Dryer are:

The thermistor is defective.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E74 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E91 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E91 fault code, it is indicating a User Interface Communication Error has been detected by the internal self diagnostics system.

An E91 User Interface Communication Error will set if the control board detects There is a communication error between the main board and the UI board.

The most common issues that will cause an E91 User Interface Communication Error to display on an Electrolux Dryer are:

Loose wire connection at the main board or UI board.
The main board is defective.
The UI board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E91 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E92 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E92 fault code, it is indicating a User Interface Protocol Incongruence Error has been detected by the internal self diagnostics system.

An E92 User Interface Protocol Incongruence Error will set if the control board detects The electronic control board is incompatible with the user interface board.

The most common issues that will cause an E92 User Interface Protocol Incongruence Error to display on an Electrolux Dryer are:

Loose wire connection at the main board or UI board.
The main board is defective.
The UI board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E92 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E93 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E93 fault code, it is indicating a Machine Configuration Checksum Error has been detected by the internal self diagnostics system.

An E93 Machine Configuration Checksum Error will set if the control board detects Wrong configuration data loaded.

The most common issues that will cause an E93 Machine Configuration Checksum Error to display on an Electrolux Dryer are:

Loose wire connection at the main board or UI board.
The main board is defective.
The UI board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E93 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E94 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E94 fault code, it is indicating a Cycle Configuration Checksum Error has been detected by the internal self diagnostics system.

An E94 Cycle Configuration Checksum Error will set if the control board detects Wrong configuration data loaded or Electronic control Board defective.

The most common issues that will cause an E94 Cycle Configuration Checksum Error to display on an Electrolux Dryer are:

Loose wire connection at the main board or UI board.
The main board is defective.
The UI board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E94 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E97 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an E97 fault code, it is indicating a Missing Program on CTF Error has been detected by the internal self diagnostics system.

An E97 Missing Program on CTF Error will set if the control board detects Discrepancy between program configuration data and selector recognition data.

The most common issues that will cause an E97 Missing Program on CTF Error to display on an Electrolux Dryer are:

Loose wire connection at the main board or UI board.
The main board is defective.
The UI board is defective.

Try turning the Dryer main power supply off for 1 minute. If the E97 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA1 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EA1 fault code, it is indicating a Frequency Error has been detected by the internal self diagnostics system.

An EA1 Frequency Error will set if the control board detects The power source frequency is invalid.

The most common issues that will cause an EA1 Frequency Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EA1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA2 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EA2 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA2 Voltage Error will set if the control board detects The power supply voltage is too high.

The most common issues that will cause an EA2 Voltage Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EA2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA3 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EA3 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA3 Voltage Error will set if the control board detects The power supply voltage is too low.

The most common issues that will cause an EA3 Voltage Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EA3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA4 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EA4 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA4 Voltage Error will set if the control board detects The power supply voltage is either too high or too low.

The most common issues that will cause an EA4 Voltage Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EA4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA5 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EA5 fault code, it is indicating a Main Board Error has been detected by the internal self diagnostics system.

An EA5 Main Board Error will set if the control board detects The main control board has an internal error.

The most common issues that will cause an EA5 Main Board Error to display on an Electrolux Dryer are:

Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the EA5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EBD mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EBD fault code, it is indicating a Line Safe Relay Error has been detected by the internal self diagnostics system.

An EBD Line Safe Relay Error will set if the control board detects The line Safe Relay on the main board is shorted.

The most common issues that will cause an EBD Line Safe Relay Error to display on an Electrolux Dryer are:

Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the EBD code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EBE mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EBE fault code, it is indicating a Line Safe Error has been detected by the internal self diagnostics system.

An EBE Line Safe Error will set if the control board detects Line Safe Error

The most common issues that will cause an EBE Line Safe Error to display on an Electrolux Dryer are:

Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the EBE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EBF mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EBF fault code, it is indicating a Line Safe Sensing Error has been detected by the internal self diagnostics system.

An EBF Line Safe Sensing Error will set if the control board detects Line Safe Sensing Error

The most common issues that will cause an EBF Line Safe Sensing Error to display on an Electrolux Dryer are:

Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the EBF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF1 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EF1 fault code, it is indicating a Vent Error has been detected by the internal self diagnostics system.

An EF1 Vent Error will set if the control board detects Ventilation or vent sensor error.

The most common issues that will cause an EF1 Vent Error to display on an Electrolux Dryer are:

The lint screen is clogged.
The dryer vent is restricted.
The vent sensor or thermistor is defective.
The contact sensor is defective.

Try turning the Dryer main power supply off for 1 minute. If the EF1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF3 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EF3 fault code, it is indicating a Vent Error has been detected by the internal self diagnostics system.

An EF3 Vent Error will set if the control board detects Maximum drying time for the selected cycle has passed and clothes are still wet.

The most common issues that will cause an EF3 Vent Error to display on an Electrolux Dryer are:

The lint screen is clogged.
The dryer vent is restricted.
The vent sensor or thermistor is defective.

Try turning the Dryer main power supply off for 1 minute. If the EF3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF6 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EF6 fault code, it is indicating a Safety Reset Error has been detected by the internal self diagnostics system.

An EF6 Safety Reset Error will set if the control board detects Electronic Control Board defective.

The most common issues that will cause an EF6 Safety Reset Error to display on an Electrolux Dryer are:

Main board failure.

Try turning the Dryer main power supply off for 1 minute. If the EF6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF8 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EF8 fault code, it is indicating a Stuck Key Error has been detected by the internal self diagnostics system.

An EF8 Stuck Key Error will set if the control board detects One of the keys is stuck or held.

The most common issues that will cause an EF8 Stuck Key Error to display on an Electrolux Dryer are:

The UI control panel is defective.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EF8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH1 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EH1 fault code, it is indicating a Frequency Error has been detected by the internal self diagnostics system.

An EH1 Frequency Error will set if the control board detects The power source frequency is invalid.

The most common issues that will cause an EH1 Frequency Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EH1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH2 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EH2 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH2 Voltage Error will set if the control board detects The power supply voltage is too high.

The most common issues that will cause an EH2 Voltage Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EH2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH3 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EH3 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH3 Voltage Error will set if the control board detects The power supply voltage is too low.

The most common issues that will cause an EH3 Voltage Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EH3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH4 mean on an Electrolux Dryer?

If your Electrolux Dryer is displaying an EH4 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH4 Voltage Error will set if the control board detects The power supply voltage is either too high or too low.

The most common issues that will cause an EH4 Voltage Error to display on an Electrolux Dryer are:

The dryer is not connected to a proper power source.
The main Board is defective.

Try turning the Dryer main power supply off for 1 minute. If the EH4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Electrolux Dryer Error Codes Disclaimer

The Electrolux Dryer Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.