Electrolux Washer Error Codes - Appliance Fault Codes

The first thing to try is switching the Washer main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Electrolux Washer not working?

Some Electrolux Washer error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does C9 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an C9 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An C9 PCB Error will set if the control board detects EEPROM Fault.

The most common issues that will cause an C9 PCB Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the C9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does CL mean on an Electrolux Washer?

If your Electrolux Washer is displaying an CL fault code, it is indicating a Control Lock Error has been detected by the internal self diagnostics system.

An CL Control Lock Error will set if the control board detects The lid is open for more than 20 minutes with the Control Lock function activated.

The most common issues that will cause an CL Control Lock Error to display on an Electrolux Washer are:

Check the appropriate service manual for more information.

Try turning the Washer main power supply off for 1 minute. If the CL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E1 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E1 fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

An E1 Water Filling System Error will set if the control board detects Water filling time is over greater than expected.

The most common issues that will cause an E1 Water Filling System Error to display on an Electrolux Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The control board is defective.
Loose wiring connection at the water valve or control board.

Try turning the Washer main power supply off for 1 minute. If the E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E2 fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

An E2 Drain System Error will set if the control board detects The water is draining too slowly.

The most common issues that will cause an E2 Drain System Error to display on an Electrolux Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The control board is defective.
Loose wiring connection at the drain pump or control board

Try turning the Washer main power supply off for 1 minute. If the E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E3 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E3 fault code, it is indicating a Lid Open Error has been detected by the internal self diagnostics system.

An E3 Lid Open Error will set if the control board detects The lid is detected as open while the control board is trying to lock the door.

The most common issues that will cause an E3 Lid Open Error to display on an Electrolux Washer are:

The lid is open.
The lid switch is defective.
The control board is defective.
Loose wiring connection at the lid switch or control board.

Try turning the Washer main power supply off for 1 minute. If the E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E4 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E4 fault code, it is indicating a Out of Balance Error has been detected by the internal self diagnostics system.

An E4 Out of Balance Error will set if the control board detects Drum imbalance detected during the final spin cycle.

The most common issues that will cause an E4 Out of Balance Error to display on an Electrolux Washer are:

Extremely unbalanced load.
The washer is not level
The suspension rods are defective
The wash tub or balance ring is defective

Try turning the Washer main power supply off for 1 minute. If the E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5 fault code, it is indicating a Washer Not Level Error has been detected by the internal self diagnostics system.

An E5 Washer Not Level Error will set if the control board detects The washer is not level.

The most common issues that will cause an E5 Washer Not Level Error to display on an Electrolux Washer are:

The washer is leaned back too far.
The impact switch is defective.

Try turning the Washer main power supply off for 1 minute. If the E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5A mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5A fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E5A Motor Error will set if the control board detects High temperature on heat sink.

The most common issues that will cause an E5A Motor Error to display on an Electrolux Washer are:

The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5A code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5B mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5B fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E5B Motor Error will set if the control board detects High temperature on heat sink.

The most common issues that will cause an E5B Motor Error to display on an Electrolux Washer are:

The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5B code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5C mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5C fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E5C Motor Error will set if the control board detects High temperature on heat sink.

The most common issues that will cause an E5C Motor Error to display on an Electrolux Washer are:

The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5D mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5D fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E5D Communication Error will set if the control board detects Communication problem between the control board and the speed control board.

The most common issues that will cause an E5D Communication Error to display on an Electrolux Washer are:

Loose wire connection at the main or speed control board.
The main control board is defective.
The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5D code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5E mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5E fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E5E Communication Error will set if the control board detects Communication problem between the control board and the speed control board.

The most common issues that will cause an E5E Communication Error to display on an Electrolux Washer are:

Loose wire connection at the main or speed control board.
The main control board is defective.
The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5F mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5F fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E5F Communication Error will set if the control board detects Communication problem between the control board and the speed control board.

The most common issues that will cause an E5F Communication Error to display on an Electrolux Washer are:

Loose wire connection at the main or speed control board.
The main control board is defective.
The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5F code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E5H mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E5H fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An E5H Voltage Error will set if the control board detects Input Voltage is Lower Than 175 V

The most common issues that will cause an E5H Voltage Error to display on an Electrolux Washer are:

Wiring problem.
The inverter board is defective.

Try turning the Washer main power supply off for 1 minute. If the E5H code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E6A mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E6A fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.

An E6A Control Board Error will set if the control board detects Heating Relay Sensing Faulty

The most common issues that will cause an E6A Control Board Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E6A code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E6H mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E6H fault code, it is indicating a Heater Error has been detected by the internal self diagnostics system.

An E6H Heater Error will set if the control board detects Heating Element Power Relay Faulty

The most common issues that will cause an E6H Heater Error to display on an Electrolux Washer are:

The control board is defective.
The heating element is shorted.
Wiring problem.

Try turning the Washer main power supply off for 1 minute. If the E6H code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E9C mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E9C fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An E9C Configuration Error will set if the control board detects Display Board Configuration Error.

The most common issues that will cause an E9C Configuration Error to display on an Electrolux Washer are:

The UI control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E9C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E9E mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E9E fault code, it is indicating a Touch Key Error has been detected by the internal self diagnostics system.

An E9E Touch Key Error will set if the control board detects Display Board Sensor / Touch Key Faulty

The most common issues that will cause an E9E Touch Key Error to display on an Electrolux Washer are:

The UI control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E9E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E9F mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E9F fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E9F Communication Error will set if the control board detects Communication error between the main control board and the motor control board.

The most common issues that will cause an E9F Communication Error to display on an Electrolux Washer are:

The motor control board is defective.
The main control board is defective.
Loose wire connection.

Try turning the Washer main power supply off for 1 minute. If the E9F code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E11 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E11 fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

An E11 Water Filling System Error will set if the control board detects Water filling time is over greater than expected.

The most common issues that will cause an E11 Water Filling System Error to display on an Electrolux Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The control board is defective.
Loose wiring connection at the water valve or control board.

Try turning the Washer main power supply off for 1 minute. If the E11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E13 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E13 fault code, it is indicating a Water Leakage Error has been detected by the internal self diagnostics system.

An E13 Water Leakage Error will set if the control board detects The water pressure sensor has indicated the washer is leaking.

The most common issues that will cause an E13 Water Leakage Error to display on an Electrolux Washer are:

The washer is leaking.
Loose wire connection on the pressure switch terminal.
Loose wire connection on the control panel terminal.
Defective water level sensor.
The control panel is defective.

Try turning the Washer main power supply off for 1 minute. If the E13 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E14 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E14 fault code, it is indicating a Reed Switch Error has been detected by the internal self diagnostics system.

An E14 Reed Switch Error will set if the control board detects The dispenser drawer id detected as open.

The most common issues that will cause an E14 Reed Switch Error to display on an Electrolux Washer are:

The magnet is defective or missing
The reed switch is defective.
The control board is defective.
Loose wiring connection at the reed sensor or control board.

Try turning the Washer main power supply off for 1 minute. If the E14 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E17 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E17 fault code, it is indicating a Load Balance Error has been detected by the internal self diagnostics system.

An E17 Load Balance Error will set if the control board detects The load is unbalanced during the spin cycle.

The most common issues that will cause an E17 Load Balance Error to display on an Electrolux Washer are:

The load is unbalanced.
The basket is unbalanced.
The knock off switch is defective.
The control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the E17 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E21 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E21 fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

An E21 Drain System Error will set if the control board detects The water is draining too slowly.

The most common issues that will cause an E21 Drain System Error to display on an Electrolux Washer are:

The drain pump is defective.
The drain pump or hose is blocked.
The control board is defective.
Loose wiring connection at the drain pump or control board

Try turning the Washer main power supply off for 1 minute. If the E21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E23 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E23 fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

An E23 Drain System Error will set if the control board detects The drain pump relay on control board failed.

The most common issues that will cause an E23 Drain System Error to display on an Electrolux Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E23 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E24 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E24 fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

An E24 Drain System Error will set if the control board detects The drain pump relay on control board failed.

The most common issues that will cause an E24 Drain System Error to display on an Electrolux Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E24 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E31 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E31 fault code, it is indicating a Pressure Sensor Error has been detected by the internal self diagnostics system.

An E31 Pressure Sensor Error will set if the control board detects The pressure sensor not communicating with control board.

The most common issues that will cause an E31 Pressure Sensor Error to display on an Electrolux Washer are:

Loose wire connection on the pressure switch terminal.
Loose wire connection on the control panel terminal.
Defective water level sensor.
Defective control board.

Try turning the Washer main power supply off for 1 minute. If the E31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E32 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E32 fault code, it is indicating a Pressure Sensor Error has been detected by the internal self diagnostics system.

An E32 Pressure Sensor Error will set if the control board detects The pressure sensor calibration problem.

The most common issues that will cause an E32 Pressure Sensor Error to display on an Electrolux Washer are:

Loose wire connection on the pressure switch terminal.
Loose wire connection on the control panel terminal.
Defective water level sensor.
Defective control board.

Try turning the Washer main power supply off for 1 minute. If the E32 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E35 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E35 fault code, it is indicating a Over Fill Error has been detected by the internal self diagnostics system.

An E35 Over Fill Error will set if the control board detects The water level is at or above the overfill level is detected by the water level sensor.

The most common issues that will cause an E35 Over Fill Error to display on an Electrolux Washer are:

The washer has overfilled.
One of the water fill valves is stuck open or leaking.
Loose wire connection on the pressure switch terminal.
Loose wire connection on the PCB terminal.
Defective water level sensor.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E35 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E38 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E38 fault code, it is indicating a Pressure Sensor Error has been detected by the internal self diagnostics system.

An E38 Pressure Sensor Error will set if the control board detects The internal Pressure Chamber is Clogged

The most common issues that will cause an E38 Pressure Sensor Error to display on an Electrolux Washer are:

Loose wire connection on the pressure switch terminal.
Loose wire connection on the control panel terminal.
Defective water level sensor.
Broken motor belt
Defective control board.
Defective pressure switch tube.

Try turning the Washer main power supply off for 1 minute. If the E38 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E41 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E41 fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

An E41 Door Open Error will set if the control board detects Door is detected as open while the control board is trying to lock the door.

The most common issues that will cause an E41 Door Open Error to display on an Electrolux Washer are:

The door is open.
The door switch is defective.
The control board is defective.
Loose wiring connection at the door switch or control board.

Try turning the Washer main power supply off for 1 minute. If the E41 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E42 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E42 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An E42 Door Lock Error will set if the control board detects The door failed to lock.

The most common issues that will cause an E42 Door Lock Error to display on an Electrolux Washer are:

Loose wire connection at the door lock or control board.
The door lock is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E42 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E43 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E43 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An E43 PCB Error will set if the control board detects Faulty TRIAC Supplying Power to Door Delay System

The most common issues that will cause an E43 PCB Error to display on an Electrolux Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E43 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E44 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E44 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An E44 PCB Error will set if the control board detects Faulty Sensing by Door Delay System

The most common issues that will cause an E44 PCB Error to display on an Electrolux Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E44 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E45 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E45 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An E45 PCB Error will set if the control board detects Faulty Sensing by Door Delay System TRIAC

The most common issues that will cause an E45 PCB Error to display on an Electrolux Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E45 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E46 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E46 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An E46 PCB Error will set if the control board detects EEPROM Fault.

The most common issues that will cause an E46 PCB Error to display on an Electrolux Washer are:

The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E46 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E47 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E47 fault code, it is indicating a PTC Error has been detected by the internal self diagnostics system.

An E47 PTC Error will set if the control board detects The control board thinks the door PTC circuit is open in the spin cycle.

The most common issues that will cause an E47 PTC Error to display on an Electrolux Washer are:

Loose wire connection at the door lock or control board.
The door lock is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E47 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E48 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E48 fault code, it is indicating a PTC Error has been detected by the internal self diagnostics system.

An E48 PTC Error will set if the control board detects The control board thinks the door PTC circuit is closed.

The most common issues that will cause an E48 PTC Error to display on an Electrolux Washer are:

Loose wire connection at the door lock or control board.
The door lock is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E48 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E49 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E49 fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

An E49 Door Open Error will set if the control board detects Door is detected as open while the control board is trying to lock the door.

The most common issues that will cause an E49 Door Open Error to display on an Electrolux Washer are:

The door is open.
The door switch is defective.
The control board is defective.
Loose wiring connection at the door switch or control board.

Try turning the Washer main power supply off for 1 minute. If the E49 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E50 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E50 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E50 Motor Error will set if the control board detects Bad signal from tacho generator.

The most common issues that will cause an E50 Motor Error to display on an Electrolux Washer are:

The motor is defective.
The main control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the E50 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E52 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E52 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E52 Motor Error will set if the control board detects Bad signal from tacho generator.

The most common issues that will cause an E52 Motor Error to display on an Electrolux Washer are:

The motor is defective.
The speed control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E52 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E54 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E54 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E54 Motor Error will set if the control board detects The motor is running below the intended speed.

The most common issues that will cause an E54 Motor Error to display on an Electrolux Washer are:

The motor is jammed.
The inner tub is jammed.
The motor is defective.
The speed control board is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E54 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E55 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E55 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E55 Motor Error will set if the control board detects Motor overheating or motor under speed.

The most common issues that will cause an E55 Motor Error to display on an Electrolux Washer are:

The motor is jammed.
The inner tub is jammed.
The motor is defective.
The speed control board is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E55 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E56 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E56 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E56 Motor Error will set if the control board detects High motor current.

The most common issues that will cause an E56 Motor Error to display on an Electrolux Washer are:

The motor is jammed.
The inner tub is jammed.
The motor is defective.
The speed control board is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E56 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E57 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E57 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E57 Motor Error will set if the control board detects High current on inverter.

The most common issues that will cause an E57 Motor Error to display on an Electrolux Washer are:

The motor is jammed.
The inner tub is jammed.
The motor is defective.
The speed control board is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E57 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E58 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E58 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E58 Motor Error will set if the control board detects High current on motor phase.

The most common issues that will cause an E58 Motor Error to display on an Electrolux Washer are:

The motor is jammed.
The inner tub is jammed.
The motor is defective.
The speed control board is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E58 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E59 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E59 fault code, it is indicating a Motor Error has been detected by the internal self diagnostics system.

An E59 Motor Error will set if the control board detects No tacho signal for 3 seconds.

The most common issues that will cause an E59 Motor Error to display on an Electrolux Washer are:

The motor is jammed.
The inner tub is jammed.
The motor is defective.
The speed control board is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E59 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E62 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E62 fault code, it is indicating a Water Temperature Overheating Error has been detected by the internal self diagnostics system.

An E62 Water Temperature Overheating Error will set if the control board detects Overheating During Washing (Temperature above 88 °C for More Than 5 minutes)

The most common issues that will cause an E62 Water Temperature Overheating Error to display on an Electrolux Washer are:

The thermistor is defective.
The control board is defective.
The heating element is shorted.
Loose wire connection at the thermistor or control board.

Try turning the Washer main power supply off for 1 minute. If the E62 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E66 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E66 fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.

An E66 Control Board Error will set if the control board detects Heating Element Power Relay Faulty

The most common issues that will cause an E66 Control Board Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E66 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E67 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E67 fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.

An E67 Control Board Error will set if the control board detects Input voltage on microprocessor incorrect.

The most common issues that will cause an E67 Control Board Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E67 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E68 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E68 fault code, it is indicating a Heater Error has been detected by the internal self diagnostics system.

An E68 Heater Error will set if the control board detects The heating element circuit is shorted to ground.

The most common issues that will cause an E68 Heater Error to display on an Electrolux Washer are:

The control board is defective.
The heating element is shorted.
Wiring problem.

Try turning the Washer main power supply off for 1 minute. If the E68 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E69 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E69 fault code, it is indicating a Heater Error has been detected by the internal self diagnostics system.

An E69 Heater Error will set if the control board detects The heating element circuit is open.

The most common issues that will cause an E69 Heater Error to display on an Electrolux Washer are:

The control board is defective.
The heating element is open.
Wiring problem.

Try turning the Washer main power supply off for 1 minute. If the E69 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E71 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E71 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

An E71 Water Temperature Sensor Error will set if the control board detects There is no signal feedback from the thermistor to the control board.

The most common issues that will cause an E71 Water Temperature Sensor Error to display on an Electrolux Washer are:

The thermistor is defective.
The control board is defective.
Loose wire connection at the thermistor or control board.

Try turning the Washer main power supply off for 1 minute. If the E71 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E74 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E74 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

An E74 Water Temperature Sensor Error will set if the control board detects There is no signal feedback from the thermistor to the control board.

The most common issues that will cause an E74 Water Temperature Sensor Error to display on an Electrolux Washer are:

The thermistor is defective.
The control board is defective.
Loose wire connection at the thermistor or control board.

Try turning the Washer main power supply off for 1 minute. If the E74 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E75 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E75 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

An E75 Water Temperature Sensor Error will set if the control board detects There is no signal feedback from the thermistor to the control board.

The most common issues that will cause an E75 Water Temperature Sensor Error to display on an Electrolux Washer are:

The thermistor is defective.
The control board is defective.
Loose wire connection at the thermistor or control board.

Try turning the Washer main power supply off for 1 minute. If the E75 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E76 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E76 fault code, it is indicating a Cold Water Temperature Sensor Error has been detected by the internal self diagnostics system.

An E76 Cold Water Temperature Sensor Error will set if the control board detects The cold water temperature sensor is out of range.

The most common issues that will cause an E76 Cold Water Temperature Sensor Error to display on an Electrolux Washer are:

Hot and cold water hoses switched.

Try turning the Washer main power supply off for 1 minute. If the E76 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E83 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E83 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E83 Communication Error will set if the control board detects Error in Reading Selector

The most common issues that will cause an E83 Communication Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E83 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E84 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E84 fault code, it is indicating a Recirculation Pump Error has been detected by the internal self diagnostics system.

An E84 Recirculation Pump Error will set if the control board detects Recirculation Pump TRIAC Series

The most common issues that will cause an E84 Recirculation Pump Error to display on an Electrolux Washer are:

The recirculation pump is defective.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E84 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E85 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E85 fault code, it is indicating a Recirculation Pump Error has been detected by the internal self diagnostics system.

An E85 Recirculation Pump Error will set if the control board detects Recirculation Pump TRIAC

The most common issues that will cause an E85 Recirculation Pump Error to display on an Electrolux Washer are:

The recirculation pump is defective.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E85 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E86 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E86 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E86 Communication Error will set if the control board detects Selector Configuration Error

The most common issues that will cause an E86 Communication Error to display on an Electrolux Washer are:

The UI control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E86 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E87 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E87 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E87 Communication Error will set if the control board detects Display Board Microprocessor Faulty

The most common issues that will cause an E87 Communication Error to display on an Electrolux Washer are:

The UI control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E87 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E91 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E91 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E91 Communication Error will set if the control board detects Communication Error Between Main Control Board and Display Board

The most common issues that will cause an E91 Communication Error to display on an Electrolux Washer are:

The UI control board is defective.
The main control board is defective.
Loose wire connection at the UI or main control board.

Try turning the Washer main power supply off for 1 minute. If the E91 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E92 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E92 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E92 Communication Error will set if the control board detects Communication Inconsistency Between Display and Main Control Board

The most common issues that will cause an E92 Communication Error to display on an Electrolux Washer are:

The UI control board is defective.
The main control board is defective.
Loose wire connection at the UI or main control board.

Try turning the Washer main power supply off for 1 minute. If the E92 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E93 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E93 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An E93 Configuration Error will set if the control board detects Appliance Configuration Error

The most common issues that will cause an E93 Configuration Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E93 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E94 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E94 fault code, it is indicating a Configuration Error has been detected by the internal self diagnostics system.

An E94 Configuration Error will set if the control board detects Incorrect Configuration of Washing Cycle

The most common issues that will cause an E94 Configuration Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E94 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E95 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E95 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An E95 PCB Error will set if the control board detects EEPROM Fault.

The most common issues that will cause an E95 PCB Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the E95 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E97 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E97 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E97 Communication Error will set if the control board detects Communication Error Between Main Control Board and Inverter Board

The most common issues that will cause an E97 Communication Error to display on an Electrolux Washer are:

The inverter board is defective.
The main control board is defective.
Loose wire connection.

Try turning the Washer main power supply off for 1 minute. If the E97 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E98 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an E98 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An E98 Communication Error will set if the control board detects Communication error between the main control board and the motor control board.

The most common issues that will cause an E98 Communication Error to display on an Electrolux Washer are:

The motor control board is defective.
The main control board is defective.
Loose wire connection.

Try turning the Washer main power supply off for 1 minute. If the E98 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA1 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EA1 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA1 Voltage Error will set if the control board detects Incoming power frequency out of limits.

The most common issues that will cause an EA1 Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EA1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EA2 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA2 Voltage Error will set if the control board detects The incoming line voltage is too high.

The most common issues that will cause an EA2 Voltage Error to display on an Electrolux Washer are:

The power supply voltage is high.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EA2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA3 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EA3 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA3 Voltage Error will set if the control board detects The incoming line voltage is too low.

The most common issues that will cause an EA3 Voltage Error to display on an Electrolux Washer are:

The power supply voltage is low.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EA3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EA5 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EA5 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EA5 Voltage Error will set if the control board detects Main voltage sensing failure.

The most common issues that will cause an EA5 Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EA5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EAE mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EAE fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EAE Voltage Error will set if the control board detects Safety Sensing Circuit Faulty

The most common issues that will cause an EAE Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EAE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EB1 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EB1 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EB1 Voltage Error will set if the control board detects Incoming power frequency out of limits.

The most common issues that will cause an EB1 Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EB1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EB2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EB2 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EB2 Voltage Error will set if the control board detects Incoming line voltage above 130 VAC.

The most common issues that will cause an EB2 Voltage Error to display on an Electrolux Washer are:

The power supply voltage is high.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EB2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EB3 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EB3 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EB3 Voltage Error will set if the control board detects Incoming line voltage below 90 VAC.

The most common issues that will cause an EB3 Voltage Error to display on an Electrolux Washer are:

The power supply voltage is low.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EB3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EC1 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EC1 fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

An EC1 Water Filling System Error will set if the control board detects Electronically Controlled Valve Blocked with Operating Flowmeter

The most common issues that will cause an EC1 Water Filling System Error to display on an Electrolux Washer are:

The water valve is defective.
The main control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the EC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EC2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EC2 fault code, it is indicating a Weight Sensor Error has been detected by the internal self diagnostics system.

An EC2 Weight Sensor Error will set if the control board detects Data Transfer Error Between Weight Sensor and Main Control Board

The most common issues that will cause an EC2 Weight Sensor Error to display on an Electrolux Washer are:

The water valve is defective.
The main control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the EC2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EC3 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EC3 fault code, it is indicating a Weight Sensor Error has been detected by the internal self diagnostics system.

An EC3 Weight Sensor Error will set if the control board detects Problems with Weight Sensor (No Signal or Outside the Limits)

The most common issues that will cause an EC3 Weight Sensor Error to display on an Electrolux Washer are:

The water valve is defective.
The main control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the EC3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EC4 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EC4 fault code, it is indicating a Clutch Cam Error has been detected by the internal self diagnostics system.

An EC4 Clutch Cam Error will set if the control board detects The clutch cam cannot find the correct position.

The most common issues that will cause an EC4 Clutch Cam Error to display on an Electrolux Washer are:

The clutch is defective.
The clutch is jammed.
The main control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the EC4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF1 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF1 fault code, it is indicating a Drain Error has been detected by the internal self diagnostics system.

An EF1 Drain Error will set if the control board detects The control panel detected the drain pump is clogged.

The most common issues that will cause an EF1 Drain Error to display on an Electrolux Washer are:

The drain pump is clogged.

Try turning the Washer main power supply off for 1 minute. If the EF1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF2 fault code, it is indicating a Over Sud Error has been detected by the internal self diagnostics system.

An EF2 Over Sud Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

The most common issues that will cause an EF2 Over Sud Error to display on an Electrolux Washer are:

Too much detergent been used.

Try turning the Washer main power supply off for 1 minute. If the EF2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF3 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF3 fault code, it is indicating a Aqua Control System Error has been detected by the internal self diagnostics system.

An EF3 Aqua Control System Error will set if the control board detects Aqua Control System Intervention Water Pre-Fill

The most common issues that will cause an EF3 Aqua Control System Error to display on an Electrolux Washer are:

Water is leaking into the base frame.
The aqua control system is faulty.
The main control board is defective.
Wiring issue.

Try turning the Washer main power supply off for 1 minute. If the EF3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF4 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF4 fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

An EF4 Water Filling System Error will set if the control board detects No Flow From Flowmeter and Electronically Controlled Valve is Open

The most common issues that will cause an EF4 Water Filling System Error to display on an Electrolux Washer are:

The water supply is not turned on or has very low pressure.
The water hose is plugged.
The water valve is defective.
The flowmeter is defective.
The control board is defective.
Loose wiring connection at the water valve or control board.

Try turning the Washer main power supply off for 1 minute. If the EF4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF5 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF5 fault code, it is indicating a Unbalanced Load Error or Water temperature error. has been detected by the internal self diagnostics system.

An EF5 Unbalanced Load Error or Water temperature error. will set if the control board detects Drum imbalance detected during the final spin cycle. Or incoming water temperature depending on model.

The most common issues that will cause an EF5 Unbalanced Load Error or Water temperature error. to display on an Electrolux Washer are:

Extremely unbalanced load.
The inverter board is defective.
Hot and cold water hoses switched.

Try turning the Washer main power supply off for 1 minute. If the EF5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF6 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF6 fault code, it is indicating a Control Reset has been detected by the internal self diagnostics system.

An EF6 Control Reset will set if the control board detects The control has been reset.

The most common issues that will cause an EF6 Control Reset to display on an Electrolux Washer are:

Try turning the Washer main power supply off for 1 minute. If the EF6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF8 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF8 fault code, it is indicating a Touch Key Error has been detected by the internal self diagnostics system.

An EF8 Touch Key Error will set if the control board detects Display Board Sensor / Touch Key Faulty

The most common issues that will cause an EF8 Touch Key Error to display on an Electrolux Washer are:

The UI control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EF8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EF9 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EF9 fault code, it is indicating a Hot Water Temperature Sensor Error has been detected by the internal self diagnostics system.

An EF9 Hot Water Temperature Sensor Error will set if the control board detects The hot water temperature sensor is out of range.

The most common issues that will cause an EF9 Hot Water Temperature Sensor Error to display on an Electrolux Washer are:

Hot and cold water hoses switched.

Try turning the Washer main power supply off for 1 minute. If the EF9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH1 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EH1 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH1 Voltage Error will set if the control board detects Incoming power frequency out of limits.

The most common issues that will cause an EH1 Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EH1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EH2 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH2 Voltage Error will set if the control board detects The incoming line voltage is too high.

The most common issues that will cause an EH2 Voltage Error to display on an Electrolux Washer are:

The power supply voltage is high.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EH2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH3 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EH3 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH3 Voltage Error will set if the control board detects The incoming line voltage is too low.

The most common issues that will cause an EH3 Voltage Error to display on an Electrolux Washer are:

The power supply voltage is low.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EH3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EH4 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EH4 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EH4 Voltage Error will set if the control board detects 0 Watt Relay Malfunction

The most common issues that will cause an EH4 Voltage Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EH4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EHE mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EHE fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EHE Voltage Error will set if the control board detects Inconsistency Between FCV Relay and Safety Sensing Circuit

The most common issues that will cause an EHE Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EHE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does EHF mean on an Electrolux Washer?

If your Electrolux Washer is displaying an EHF fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An EHF Voltage Error will set if the control board detects Safety Sensing Circuit Faulty

The most common issues that will cause an EHF Voltage Error to display on an Electrolux Washer are:

The power supply frequency issue.
The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the EHF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an F2 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An F2 PCB Error will set if the control board detects EEPROM Fault.

The most common issues that will cause an F2 PCB Error to display on an Electrolux Washer are:

The main control board is defective.

Try turning the Washer main power supply off for 1 minute. If the F2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8 mean on an Electrolux Washer?

If your Electrolux Washer is displaying an F8 fault code, it is indicating a Pressure Sensor Error has been detected by the internal self diagnostics system.

An F8 Pressure Sensor Error will set if the control board detects The pressure sensor calibration problem.

The most common issues that will cause an F8 Pressure Sensor Error to display on an Electrolux Washer are:

Loose wire connection on the pressure switch terminal.
Loose wire connection on the control panel terminal.
Defective water level sensor.
Defective control board.

Try turning the Washer main power supply off for 1 minute. If the F8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does Fd mean on an Electrolux Washer?

If your Electrolux Washer is displaying an Fd fault code, it is indicating a Lid Lock Error has been detected by the internal self diagnostics system.

An Fd Lid Lock Error will set if the control board detects The lid failed to lock.

The most common issues that will cause an Fd Lid Lock Error to display on an Electrolux Washer are:

Loose wire connection at the lid lock or control board.
The lid lock is defective.
The control board is defective.

Try turning the Washer main power supply off for 1 minute. If the Fd code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Electrolux Washer Error Codes Disclaimer

The Electrolux Washer Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.