Samsung Washer Error Codes

Select form the list of Samsung Washer error codes below for the code meaning and possible issues that may be causing the fault to display.

Why is my Samsung Washer displaying error codes?

Your Samsung Washer will display error codes when the main control panel internal diagnostics system has detected a problem.

How can I reset Samsung Washer Error Codes

The first thing to try is switching the Washer main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Samsung Washer not working?

Some Samsung Washer error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does – mean on a Samsung Washer?

If your Samsung Washer is displaying an – fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

An – PCB Error will set if the control board detects EEPROM Fault.

The most common issues that will cause an – PCB Error to display on a Samsung Washer are:

• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the – code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 1C mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 1C fault code, it is indicating a Water Level Sensor Error has been detected by the internal self diagnostics system.

An 1 1C Water Level Sensor Error will set if the control board detects The water level sensor input signal is out of range.
Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

The most common issues that will cause an 1 1C Water Level Sensor Error to display on a Samsung Washer are:

• Loose wire connection on the pressure switch terminal.
• Loose wire connection on the PCB terminal.
• Defective water level sensor.

Try turning the Washer main power supply off for 1 minute. If the 1 1C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C1 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C1 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C1 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C1 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C2 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C2 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C2 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C2 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C3 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C3 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C3 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C3 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C4 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C4 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C4 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C4 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C5 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C5 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C5 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C5 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C6 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C6 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C6 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C6 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C7 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C7 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C7 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C7 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 3C8 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 3C8 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

An 1 3C8 Motor Locked Error will set if the control board detects The motor won’t turn.
There is no feedback signal from motor or over current condition been detected.

The most common issues that will cause an 1 3C8 Motor Locked Error to display on a Samsung Washer are:

• The motor is jammed.
• The inner tub is jammed.
• The motor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 3C8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 4C mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 4C fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

An 1 4C Water Filling System Error will set if the control board detects Water filling time is over 16 minutes or there is no change in water level for 3 to 5 minutes after the water supply starts.

The most common issues that will cause an 1 4C Water Filling System Error to display on a Samsung Washer are:

• The water supply is not turned on or has very low pressure.
• The water hose is plugged.
• The water valve is defective.
• The main PCB is defective.
• Loose wiring connection at the water valve or main PCB.

Try turning the Washer main power supply off for 1 minute. If the 1 4C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 5C mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 5C fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

An 1 5C Drain System Error will set if the control board detects The water level signal fails to drop below the reset point 15 to 30 minutes after the drain operation starts.

The most common issues that will cause an 1 5C Drain System Error to display on a Samsung Washer are:

• The drain pump is defective.
• The drain pump or hose is blocked.
• The main PCB is defective.
• Loose wiring connection at the drain pump or main PCB

Try turning the Washer main power supply off for 1 minute. If the 1 5C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 8C mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 8C fault code, it is indicating a Vibration (MEMS) Sensor Error has been detected by the internal self diagnostics system.

An 1 8C Vibration (MEMS) Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

The most common issues that will cause an 1 8C Vibration (MEMS) Sensor Error to display on a Samsung Washer are:

• Loose or bad wire connection on the MEMS sensor terminal.
• Loose or bad wire connection on the PCB terminal.
• The MEMS sensor is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 8C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 9C mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 9C fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

An 1 9C Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

The most common issues that will cause an 1 9C Motor Voltage Error to display on a Samsung Washer are:

• Abnormal power supply.
• PCB power control bus error.

Try turning the Washer main power supply off for 1 minute. If the 1 9C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 9C1 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 9C1 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

An 1 9C1 Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

The most common issues that will cause an 1 9C1 Motor Voltage Error to display on a Samsung Washer are:

• Abnormal power supply.
• PCB power control bus error.

Try turning the Washer main power supply off for 1 minute. If the 1 9C1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 9C2 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 9C2 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

An 1 9C2 Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

The most common issues that will cause an 1 9C2 Motor Voltage Error to display on a Samsung Washer are:

• Abnormal power supply.
• PCB power control bus error.

Try turning the Washer main power supply off for 1 minute. If the 1 9C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 AC mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 AC fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An 1 AC Communication Error will set if the control board detects Communication Error between the main PCB and the sub PCB.

The most common issues that will cause an 1 AC Communication Error to display on a Samsung Washer are:

• Loose wire connection at the main PCB or sub PCB.
• The main PCB is defective.
• The sub PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 AC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 dC mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 dC fault code, it is indicating a Door lock Error has been detected by the internal self diagnostics system.

An 1 dC Door lock Error will set if the control board detects Door is detected as open while the main PCB is trying to lock the door.

The most common issues that will cause an 1 dC Door lock Error to display on a Samsung Washer are:

• The door is open.
• The door switch is defective.
• The main PCB is defective.
• Loose wiring connection at the door switch or main PCB.

Try turning the Washer main power supply off for 1 minute. If the 1 dC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 dC1 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 dC1 fault code, it is indicating a Door lock Error has been detected by the internal self diagnostics system.

An 1 dC1 Door lock Error will set if the control board detects The door fails to lock after 3 to 7 attempts.

The most common issues that will cause an 1 dC1 Door lock Error to display on a Samsung Washer are:

• Loose wire connection at the door lock or main PCB.
• The door lock is defective.
• The main PCB is defective.

Try turning the Washer main power supply off for 1 minute. If the 1 dC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1 dC4 mean on a Samsung Washer?

If your Samsung Washer is displaying an 1 dC4 fault code, it is indicating a Dual Top Inner Door Open Error has been detected by the internal self diagnostics system.

An 1 dC4 Dual Top Inner Door Open Error will set if the control board detects Top inner door is detected as open while it is trying to lock the door.

The most common issues that will cause an 1 dC4 Dual Top Inner Door Open Error to display on a Samsung Washer are:

• Loose/bad wire connection on either door lock terminal or PCB terminal. Door lock defective, or PCB main defective.

  Try turning the Washer main power supply off for 1 minute. If the 1 dC4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1 HC mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1 HC fault code, it is indicating a Heater Error has been detected by the internal self diagnostics system.

  An 1 HC Heater Error will set if the control board detects The washer water temperature rises more than 7°C in 1 min or less than 2°C in 10 min after the heater is on.

  The most common issues that will cause an 1 HC Heater Error to display on a Samsung Washer are:

  • The heating element is defective.
  • The main PCB is defective.
  • Loose wire connection at the heating element or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the 1 HC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1 LC1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1 LC1 fault code, it is indicating a Water Leaking Error has been detected by the internal self diagnostics system.

  An 1 LC1 Water Leaking Error will set if the control board detects The water level dropped below the water level sensor signal reset point 4 times or more during the wash or rinse cycle.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an 1 LC1 Water Leaking Error to display on a Samsung Washer are:

  • The washer is leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 1 LC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1 OC mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1 OC fault code, it is indicating a Over Fill Error has been detected by the internal self diagnostics system.

  An 1 OC Over Fill Error will set if the control board detects The water level is at or above the overfill level is detected by the water level sensor.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an 1 OC Over Fill Error to display on a Samsung Washer are:

  • The washer has overfilled.
  • One of the water fill valves is stuck open or leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 1 OC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1 tC mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1 tC fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

  An 1 tC Thermistor Error will set if the control board detects There is no signal feedback from the thermistor to the main PCB for 5 seconds or longer.

  The most common issues that will cause an 1 tC Thermistor Error to display on a Samsung Washer are:

  • The thermistor is defective.
  • The main PCB is defective.
  • Loose wire connection at the thermistor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the 1 tC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1 tC4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1 tC4 fault code, it is indicating a PCB Temperature Error has been detected by the internal self diagnostics system.

  An 1 tC4 PCB Temperature Error will set if the control board detects The temperature of the Intelligent Power Module (IPM) of the main PCB is abnormal or the thermistor of the main PCB is defective.

  The most common issues that will cause an 1 tC4 PCB Temperature Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 1 tC4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1 Ub mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1 Ub fault code, it is indicating a Load Balance Error has been detected by the internal self diagnostics system.

  An 1 Ub Load Balance Error will set if the control board detects Drum imbalance or cabinet bump is detected by hall sensor during final spin.

  The most common issues that will cause an 1 Ub Load Balance Error to display on a Samsung Washer are:

  • Extremely unbalanced load.
  • The hall sensor is defective.
  • Loose wiring connection at the hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the 1 Ub code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1C mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1C fault code, it is indicating a Water Level Sensor Error has been detected by the internal self diagnostics system.

  An 1C Water Level Sensor Error will set if the control board detects The water level sensor input signal is out of range.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an 1C Water Level Sensor Error to display on a Samsung Washer are:

  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.

  Try turning the Washer main power supply off for 1 minute. If the 1C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 1E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 1E fault code, it is indicating a Water Level Sensor Error has been detected by the internal self diagnostics system.

  An 1E Water Level Sensor Error will set if the control board detects The water level sensor input signal is out of range.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an 1E Water Level Sensor Error to display on a Samsung Washer are:

  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.

  Try turning the Washer main power supply off for 1 minute. If the 1E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 2E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 2E fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 2E Motor Voltage Error will set if the control board detects The voltage for the motor is higher or lower than the specified limit.

  The most common issues that will cause an 2E Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • Main PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 2E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3C Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C1 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3C1 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C1 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C2 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3C2 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C2 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C3 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3C3 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C3 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C4 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

  An 3C4 Motor Locked Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C4 Motor Locked Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C5 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C5 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

  An 3C5 Motor Locked Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C5 Motor Locked Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C6 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C6 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

  An 3C6 Motor Locked Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C6 Motor Locked Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C7 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C7 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

  An 3C7 Motor Locked Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C7 Motor Locked Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3C8 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3C8 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3C8 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3C8 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3C8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3E fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3E Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3E Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3E1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3E1 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3E1 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3E1 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3E2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3E2 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3E2 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3E2 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3E3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3E3 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3E3 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3E3 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 3E8 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 3E8 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 3E8 Motor Voltage Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an 3E8 Motor Voltage Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 3E8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 4C mean on a Samsung Washer?

  If your Samsung Washer is displaying an 4C fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

  An 4C Water Filling System Error will set if the control board detects Water filling time is over 16 minutes or there is no change in water level for 3 to 5 minutes after the water supply starts.

  The most common issues that will cause an 4C Water Filling System Error to display on a Samsung Washer are:

  • The water supply is not turned on or has very low pressure.
  • The water hose is plugged.
  • The water valve is defective.
  • The main PCB is defective.
  • Loose wiring connection at the water valve or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the 4C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 4C2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 4C2 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

  An 4C2 Water Temperature Sensor Error will set if the control board detects Abnormal water temperature is sensed on the initial water supply.

  The most common issues that will cause an 4C2 Water Temperature Sensor Error to display on a Samsung Washer are:

  • The hot or cold water hose connection is incorrect.
  • The thermistor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 4C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 4E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 4E fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

  An 4E Water Filling System Error will set if the control board detects Water filling time is over 16 minutes or there is no change in water level for 3 to 5 minutes after the water supply starts.

  The most common issues that will cause an 4E Water Filling System Error to display on a Samsung Washer are:

  • The water supply is not turned on or has very low pressure.
  • The water hose is plugged.
  • The water valve is defective.
  • The main PCB is defective.
  • Loose wiring connection at the water valve or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the 4E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 4E2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 4E2 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

  An 4E2 Water Temperature Sensor Error will set if the control board detects Abnormal water temperature is sensed on the initial water supply.

  The most common issues that will cause an 4E2 Water Temperature Sensor Error to display on a Samsung Washer are:

  • The hot or cold water hose connection is incorrect.
  • The thermistor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 4E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 5C mean on a Samsung Washer?

  If your Samsung Washer is displaying an 5C fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

  An 5C Drain System Error will set if the control board detects The water level signal fails to drop below the reset point 15 to 30 minutes after the drain operation starts.

  The most common issues that will cause an 5C Drain System Error to display on a Samsung Washer are:

  • The drain pump is defective.
  • The drain pump or hose is blocked.
  • The main PCB is defective.
  • Loose wiring connection at the drain pump or main PCB

  Try turning the Washer main power supply off for 1 minute. If the 5C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 5E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 5E fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

  An 5E Drain System Error will set if the control board detects The water level signal fails to drop below the reset point 15 to 30 minutes after the drain operation starts.

  The most common issues that will cause an 5E Drain System Error to display on a Samsung Washer are:

  • The drain pump is defective.
  • The drain pump or hose is blocked.
  • The main PCB is defective.
  • Loose wiring connection at the drain pump or main PCB

  Try turning the Washer main power supply off for 1 minute. If the 5E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 7E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 7E fault code, it is indicating a Silver Care System Error has been detected by the internal self diagnostics system.

  An 7E Silver Care System Error will set if the control board detects The silver care kit is running out.

  The most common issues that will cause an 7E Silver Care System Error to display on a Samsung Washer are:

  • The silver care PCB is defective.
  • The main PCB is defective.
  • Loose wiring connection.

  Try turning the Washer main power supply off for 1 minute. If the 7E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 8C mean on a Samsung Washer?

  If your Samsung Washer is displaying an 8C fault code, it is indicating a Vibration (MEMS) Sensor Error has been detected by the internal self diagnostics system.

  An 8C Vibration (MEMS) Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

  The most common issues that will cause an 8C Vibration (MEMS) Sensor Error to display on a Samsung Washer are:

  • Loose or bad wire connection on the MEMS sensor terminal.
  • Loose or bad wire connection on the PCB terminal.
  • The MEMS sensor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 8C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 8C1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 8C1 fault code, it is indicating a Front MEMS Sensor Error has been detected by the internal self diagnostics system.

  An 8C1 Front MEMS Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

  The most common issues that will cause an 8C1 Front MEMS Sensor Error to display on a Samsung Washer are:

  • Loose or bad wire connection on the MEMS sensor terminal.
  • Loose or bad wire connection on the PCB terminal.
  • The MEMS sensor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 8C1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 8C2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 8C2 fault code, it is indicating a Rear MEMS Sensor Error has been detected by the internal self diagnostics system.

  An 8C2 Rear MEMS Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

  The most common issues that will cause an 8C2 Rear MEMS Sensor Error to display on a Samsung Washer are:

  • Loose or bad wire connection on the MEMS sensor terminal.
  • Loose or bad wire connection on the PCB terminal.
  • The MEMS sensor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 8C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 8E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 8E fault code, it is indicating a Vibration (MEMS) Sensor Error has been detected by the internal self diagnostics system.

  An 8E Vibration (MEMS) Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

  The most common issues that will cause an 8E Vibration (MEMS) Sensor Error to display on a Samsung Washer are:

  • Loose or bad wire connection on the MEMS sensor terminal.
  • Loose or bad wire connection on the PCB terminal.
  • The MEMS sensor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 8E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 8E1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 8E1 fault code, it is indicating a Front MEMS Sensor Error has been detected by the internal self diagnostics system.

  An 8E1 Front MEMS Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

  The most common issues that will cause an 8E1 Front MEMS Sensor Error to display on a Samsung Washer are:

  • Loose or bad wire connection on the MEMS sensor terminal.
  • Loose or bad wire connection on the PCB terminal.
  • The MEMS sensor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the 8E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 8E2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 8E2 fault code, it is indicating a Rear MEMS Sensor Error has been detected by the internal self diagnostics system.

  An 8E2 Rear MEMS Sensor Error will set if the control board detects Abnormal output from the MEMS sensor is detected for 5 seconds or longer. (Over 4.5V or under 0.5V)

  The most common issues that will cause an 8E2 Rear MEMS Sensor Error to display on a Samsung Washer are:

  • Loose or bad wire connection on the MEMS sensor terminal.
  • Loose or bad wire connection on the PCB terminal.
  • The MEMS sensor is defective.
  • The main PCB is defective.
  • Motor assembly trouble (WF203 / BFW36 only)

  Try turning the Washer main power supply off for 1 minute. If the 8E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 9C mean on a Samsung Washer?

  If your Samsung Washer is displaying an 9C fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 9C Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

  The most common issues that will cause an 9C Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 9C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 9C1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 9C1 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 9C1 Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

  The most common issues that will cause an 9C1 Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 9C1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 9C2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 9C2 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 9C2 Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

  The most common issues that will cause an 9C2 Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 9C2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 9E mean on a Samsung Washer?

  If your Samsung Washer is displaying an 9E fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 9E Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

  The most common issues that will cause an 9E Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 9E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 9E1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 9E1 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 9E1 Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

  The most common issues that will cause an 9E1 Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 9E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does 9E2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an 9E2 fault code, it is indicating a Motor Voltage Error has been detected by the internal self diagnostics system.

  An 9E2 Motor Voltage Error will set if the control board detects The motor voltage is higher or lower than specified limit.

  The most common issues that will cause an 9E2 Motor Voltage Error to display on a Samsung Washer are:

  • Abnormal power supply.
  • PCB power control bus error.

  Try turning the Washer main power supply off for 1 minute. If the 9E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AC mean on a Samsung Washer?

  If your Samsung Washer is displaying an AC fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AC Communication Error will set if the control board detects Communication Error between the main PCB and the sub PCB.

  The most common issues that will cause an AC Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the main PCB or sub PCB.
  • The main PCB is defective.
  • The sub PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the AC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AC2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AC2 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AC2 Communication Error will set if the control board detects The diagnosis of the I/O board communication check.

  The most common issues that will cause an AC2 Communication Error to display on a Samsung Washer are:

  • The I/O board is defective.

  Try turning the Washer main power supply off for 1 minute. If the AC2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AC3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AC3 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AC3 Communication Error will set if the control board detects Communication Error between the DR Modem and the main PCB.

  The most common issues that will cause an AC3 Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the main PCB or the DR modem.
  • The main PCB is defective.
  • The DR Modem is defective.

  Try turning the Washer main power supply off for 1 minute. If the AC3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AC4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AC4 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AC4 Communication Error will set if the control board detects Communication Error between the WIFI PCB and the main PCB.

  The most common issues that will cause an AC4 Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the WIFI PCB or main PCB.
  • The main PCB is defective.
  • The WIFI PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the AC4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AC5 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AC5 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AC5 Communication Error will set if the control board detects Communication Error between the LCD display and the main PCB.

  The most common issues that will cause an AC5 Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the main PCB or the LCD display.
  • The main PCB is defective.
  • The LCD display is defective.

  Try turning the Washer main power supply off for 1 minute. If the AC5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AC6 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AC6 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AC6 Communication Error will set if the control board detects Communication Error between the main PCB and the inverter PCB.

  The most common issues that will cause an AC6 Communication Error to display on a Samsung Washer are:

  • Loose wire connections at the main PCB or the inverter PCB.
  • The main PCB is defective.
  • The inverter PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the AC6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AE mean on a Samsung Washer?

  If your Samsung Washer is displaying an AE fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AE Communication Error will set if the control board detects Communication Error between the main PCB and the sub PCB.

  The most common issues that will cause an AE Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the main PCB or sub PCB.
  • The main PCB is defective.
  • The sub PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the AE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AE3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AE3 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AE3 Communication Error will set if the control board detects Communication Error between the DR Modem and the main PCB.

  The most common issues that will cause an AE3 Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the main PCB or the DR modem.
  • The main PCB is defective.
  • The DR Modem is defective.

  Try turning the Washer main power supply off for 1 minute. If the AE3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AE4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AE4 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AE4 Communication Error will set if the control board detects Communication Error between the WIFI PCB and the main PCB.

  The most common issues that will cause an AE4 Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the WIFI PCB or main PCB.
  • The main PCB is defective.
  • The WIFI PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the AE4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AE5 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AE5 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AE5 Communication Error will set if the control board detects Communication Error between the LCD display and the main PCB.

  The most common issues that will cause an AE5 Communication Error to display on a Samsung Washer are:

  • Loose wire connection at the main PCB or the LCD display.
  • The main PCB is defective.
  • The LCD display is defective.

  Try turning the Washer main power supply off for 1 minute. If the AE5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does AE6 mean on a Samsung Washer?

  If your Samsung Washer is displaying an AE6 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

  An AE6 Communication Error will set if the control board detects Communication Error between the main PCB and the inverter PCB.

  The most common issues that will cause an AE6 Communication Error to display on a Samsung Washer are:

  • Loose wire connections at the main PCB or the inverter PCB.
  • The main PCB is defective.
  • The inverter PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the AE6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does bC2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an bC2 fault code, it is indicating a Button Error has been detected by the internal self diagnostics system.

  An bC2 Button Error will set if the control board detects One of the buttons is stuck or held for over 12 seconds.

  The most common issues that will cause an bC2 Button Error to display on a Samsung Washer are:

  • The control panel is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the bC2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does bE mean on a Samsung Washer?

  If your Samsung Washer is displaying an bE fault code, it is indicating a Hall Sensor Error has been detected by the internal self diagnostics system.

  An bE Hall Sensor Error will set if the control board detects The hall sensor signal has been received while motor is not operating.

  The most common issues that will cause an bE Hall Sensor Error to display on a Samsung Washer are:

  • The hall sensor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the bE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does CE mean on a Samsung Washer?

  If your Samsung Washer is displaying an CE fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

  An CE Water Temperature Sensor Error will set if the control board detects Abnormal water temperature is sensed on the initial water supply.

  The most common issues that will cause an CE Water Temperature Sensor Error to display on a Samsung Washer are:

  • The hot or cold water hose connection is incorrect.
  • The thermistor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the CE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dc mean on a Samsung Washer?

  If your Samsung Washer is displaying an dc fault code, it is indicating a Load Balance Issue or Hall Sensor Error has been detected by the internal self diagnostics system.

  An dc Load Balance Issue or Hall Sensor Error will set if the control board detects Drum imbalance or cabinet bump is detected by hall sensor during final spin.

  The most common issues that will cause an dc Load Balance Issue or Hall Sensor Error to display on a Samsung Washer are:

  • Extremely unbalanced load.
  • The hall sensor is defective.
  • Loose wiring connection at the hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the dc code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dC. mean on a Samsung Washer?

  If your Samsung Washer is displaying an dC. fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

  An dC. Door Open Error will set if the control board detects Door is detected as open while the main PCB is trying to lock the door.

  The most common issues that will cause an dC. Door Open Error to display on a Samsung Washer are:

  • The door is open.
  • The door switch is defective.
  • The main PCB is defective.
  • Loose wiring connection at the door switch or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the dC. code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dC1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an dC1 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

  An dC1 Door Lock Error will set if the control board detects The door fails to lock after 3 to 7 attempts.

  The most common issues that will cause an dC1 Door Lock Error to display on a Samsung Washer are:

  • Loose wire connection at the door lock or main PCB.
  • The door lock is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the dC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dC3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an dC3 fault code, it is indicating a Add Door Error has been detected by the internal self diagnostics system.

  An dC3 Add Door Error will set if the control board detects Lock switch error

  The most common issues that will cause an dC3 Add Door Error to display on a Samsung Washer are:

  • Add Door lock switch terminal is broken, loose / broken wire connection. Add door lock switch fault. Main PCB fault.

  Try turning the Washer main power supply off for 1 minute. If the dC3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does ddC mean on a Samsung Washer?

  If your Samsung Washer is displaying an ddC fault code, it is indicating a Add Door Error has been detected by the internal self diagnostics system.

  An ddC Add Door Error will set if the control board detects Switch contact error

  The most common issues that will cause an ddC Add Door Error to display on a Samsung Washer are:

  • Add Door lock switch terminal is broken, loose / broken wire connection. Add door lock switch fault. Main PCB fault.

  Try turning the Washer main power supply off for 1 minute. If the ddC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dE mean on a Samsung Washer?

  If your Samsung Washer is displaying an dE fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

  An dE Door Open Error will set if the control board detects Door is detected as open while the main PCB is trying to lock the door.

  The most common issues that will cause an dE Door Open Error to display on a Samsung Washer are:

  • The door is open.
  • The door switch is defective.
  • The main PCB is defective.
  • Loose wiring connection at the door switch or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the dE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dE1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an dE1 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

  An dE1 Door Lock Error will set if the control board detects The door fails to lock after 3 to 7 attempts.

  The most common issues that will cause an dE1 Door Lock Error to display on a Samsung Washer are:

  • Loose wire connection at the door lock or main PCB.
  • The door lock is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the dE1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dL mean on a Samsung Washer?

  If your Samsung Washer is displaying an dL fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

  An dL Door Open Error will set if the control board detects Door is detected as open while the main PCB is trying to lock the door.

  The most common issues that will cause an dL Door Open Error to display on a Samsung Washer are:

  • The door is open.
  • The door switch is defective.
  • The main PCB is defective.
  • Loose wiring connection at the door switch or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the dL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does dS mean on a Samsung Washer?

  If your Samsung Washer is displaying an dS fault code, it is indicating a Door Open Error has been detected by the internal self diagnostics system.

  An dS Door Open Error will set if the control board detects Door is detected as open while the main PCB is trying to lock the door.

  The most common issues that will cause an dS Door Open Error to display on a Samsung Washer are:

  • The door is open.
  • The door switch is defective.
  • The main PCB is defective.
  • Loose wiring connection at the door switch or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the dS code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E1 fault code, it is indicating a Water filling system trouble has been detected by the internal self diagnostics system.

  An E1 Water filling system trouble will set if the control board detects Water filling time is over 20 minutes or there is no change in water level for 2 minutes after the water supply starts.

  The most common issues that will cause an E1 Water filling system trouble to display on a Samsung Washer are:

  • The water supply is not turned on or has very low pressure.
  • The water hose is plugged.
  • The water valve is defective.
  • The main PCB is defective.
  • Loose wiring connection at the water valve or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E2 fault code, it is indicating a Button Error has been detected by the internal self diagnostics system.

  An E2 Button Error will set if the control board detects One of the buttons is stuck or held for over 12 seconds.

  The most common issues that will cause an E2 Button Error to display on a Samsung Washer are:

  • The control panel is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E3 fault code, it is indicating a Motor Locked Error has been detected by the internal self diagnostics system.

  An E3 Motor Locked Error will set if the control board detects The motor won’t turn.
  There is no feedback signal from motor or over current condition been detected.

  The most common issues that will cause an E3 Motor Locked Error to display on a Samsung Washer are:

  • The motor is jammed.
  • The inner tub is jammed.
  • The motor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E4 fault code, it is indicating a Load Balance Issue or Hall Sensor Error has been detected by the internal self diagnostics system.

  An E4 Load Balance Issue or Hall Sensor Error will set if the control board detects Drum imbalance or cabinet bump is detected by hall sensor during final spin.

  The most common issues that will cause an E4 Load Balance Issue or Hall Sensor Error to display on a Samsung Washer are:

  • Extremely unbalanced load.
  • The hall sensor is defective.
  • Loose wiring connection at the hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E5 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E5 fault code, it is indicating a Heating System Error has been detected by the internal self diagnostics system.

  An E5 Heating System Error will set if the control board detects The washer water temperature rises more than 7°C in 1 min or less than 2°C in 10 min after the heater is on.

  The most common issues that will cause an E5 Heating System Error to display on a Samsung Washer are:

  • The heating element is defective.
  • The main PCB is defective.
  • Loose wire connection at the heating element or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E7 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E7 fault code, it is indicating a Water Level Sensor Error has been detected by the internal self diagnostics system.

  An E7 Water Level Sensor Error will set if the control board detects The water level sensor input signal is out of range.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an E7 Water Level Sensor Error to display on a Samsung Washer are:

  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.

  Try turning the Washer main power supply off for 1 minute. If the E7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E8 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E8 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

  An E8 Water Temperature Sensor Error will set if the control board detects Abnormal water temperature is sensed on the initial water supply.

  The most common issues that will cause an E8 Water Temperature Sensor Error to display on a Samsung Washer are:

  • The hot or cold water hose connection is incorrect.
  • The thermistor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the E8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does E9 mean on a Samsung Washer?

  If your Samsung Washer is displaying an E9 fault code, it is indicating a Water Leak Error has been detected by the internal self diagnostics system.

  An E9 Water Leak Error will set if the control board detects The water level dropped below the water level sensor signal reset point 4 times or more during the wash or rinse cycle.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an E9 Water Leak Error to display on a Samsung Washer are:

  • The washer is leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the E9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Ea mean on a Samsung Washer?

  If your Samsung Washer is displaying an Ea fault code, it is indicating a Motor Tacho Error has been detected by the internal self diagnostics system.

  An Ea Motor Tacho Error will set if the control board detects Less than 2 motor tacho signals are inputted 2 seconds after the motor starts.

  The most common issues that will cause an Ea Motor Tacho Error to display on a Samsung Washer are:

  • The motor tacho sensor is defective.
  • Wiring connection issue.

  Try turning the Washer main power supply off for 1 minute. If the Ea code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Eb mean on a Samsung Washer?

  If your Samsung Washer is displaying an Eb fault code, it is indicating a Motor TRIAC Error has been detected by the internal self diagnostics system.

  An Eb Motor TRIAC Error will set if the control board detects More than 300 Tacho signals are inputted every 1 second while the motor is in operation.

  The most common issues that will cause an Eb Motor TRIAC Error to display on a Samsung Washer are:

  • The motor tacho sensor is defective.
  • Wiring connection issue.

  Try turning the Washer main power supply off for 1 minute. If the Eb code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Ec mean on a Samsung Washer?

  If your Samsung Washer is displaying an Ec fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

  An Ec Thermistor Error will set if the control board detects Thermistor voltage is 0.2V or less for over 3 seconds.
  Thermistor voltage is 4.5V or more for over 3 seconds.

  The most common issues that will cause an Ec Thermistor Error to display on a Samsung Washer are:

  • The thermistor is defective.
  • The main PCB id defective.
  • Loose wiring connection at the thermistor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the Ec code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Ed mean on a Samsung Washer?

  If your Samsung Washer is displaying an Ed fault code, it is indicating a Door lock Error has been detected by the internal self diagnostics system.

  An Ed Door lock Error will set if the control board detects Door is detected as open while the main PCB is trying to lock the door.

  The most common issues that will cause an Ed Door lock Error to display on a Samsung Washer are:

  • The door is open.
  • The door switch is defective.
  • The main PCB is defective.
  • Loose wiring connection at the door switch or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the Ed code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does FL mean on a Samsung Washer?

  If your Samsung Washer is displaying an FL fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

  An FL Door Lock Error will set if the control board detects The door fails to lock after 3 to 7 attempts.

  The most common issues that will cause an FL Door Lock Error to display on a Samsung Washer are:

  • Loose wire connection at the door lock or main PCB.
  • The door lock is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the FL code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does HC mean on a Samsung Washer?

  If your Samsung Washer is displaying an HC fault code, it is indicating a Heating System Error has been detected by the internal self diagnostics system.

  An HC Heating System Error will set if the control board detects The washer water temperature rises more than 7°C in 1 min or less than 2°C in 10 min after the heater is on.

  The most common issues that will cause an HC Heating System Error to display on a Samsung Washer are:

  • The heating element is defective.
  • The main PCB is defective.
  • Loose wire connection at the heating element or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the HC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does HE mean on a Samsung Washer?

  If your Samsung Washer is displaying an HE fault code, it is indicating a Heating System Error has been detected by the internal self diagnostics system.

  An HE Heating System Error will set if the control board detects The washer water temperature rises more than 7°C in 1 min or less than 2°C in 10 min after the heater is on.

  The most common issues that will cause an HE Heating System Error to display on a Samsung Washer are:

  • The heating element is defective.
  • The main PCB is defective.
  • Loose wire connection at the heating element or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the HE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Hr mean on a Samsung Washer?

  If your Samsung Washer is displaying an Hr fault code, it is indicating a Heater Relay Error has been detected by the internal self diagnostics system.

  An Hr Heater Relay Error will set if the control board detects The heater relay is not functioning as intended.

  The most common issues that will cause an Hr Heater Relay Error to display on a Samsung Washer are:

  • The main PCB is defective.
  • The thermistor is defective.
  • Loose wiring connection at the main PCB, heater or thermistor

  Try turning the Washer main power supply off for 1 minute. If the Hr code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does IE mean on a Samsung Washer?

  If your Samsung Washer is displaying an IE fault code, it is indicating a Water Level Sensor Error has been detected by the internal self diagnostics system.

  An IE Water Level Sensor Error will set if the control board detects The water level sensor input signal is out of range.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an IE Water Level Sensor Error to display on a Samsung Washer are:

  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.

  Try turning the Washer main power supply off for 1 minute. If the IE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does LC mean on a Samsung Washer?

  If your Samsung Washer is displaying an LC fault code, it is indicating a Water Leak Error has been detected by the internal self diagnostics system.

  An LC Water Leak Error will set if the control board detects The water level dropped below the water level sensor signal reset point 4 times or more during the wash or rinse cycle.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an LC Water Leak Error to display on a Samsung Washer are:

  • The washer is leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the LC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does LC1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an LC1 fault code, it is indicating a Water Leak Error has been detected by the internal self diagnostics system.

  An LC1 Water Leak Error will set if the control board detects The water level dropped below the water level sensor signal reset point 4 times or more during the wash or rinse cycle.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an LC1 Water Leak Error to display on a Samsung Washer are:

  • The washer is leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the LC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does LE mean on a Samsung Washer?

  If your Samsung Washer is displaying an LE fault code, it is indicating a Water Leak Error has been detected by the internal self diagnostics system.

  An LE Water Leak Error will set if the control board detects The water level dropped below the water level sensor signal reset point 4 times or more during the wash or rinse cycle.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an LE Water Leak Error to display on a Samsung Washer are:

  • The washer is leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the LE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does LE1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an LE1 fault code, it is indicating a Water Level Sensor Error has been detected by the internal self diagnostics system.

  An LE1 Water Level Sensor Error will set if the control board detects The water level sensor input signal is out of range.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an LE1 Water Level Sensor Error to display on a Samsung Washer are:

  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.

  Try turning the Washer main power supply off for 1 minute. If the LE1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does LO mean on a Samsung Washer?

  If your Samsung Washer is displaying an LO fault code, it is indicating a Door Unlock Error has been detected by the internal self diagnostics system.

  An LO Door Unlock Error will set if the control board detects The door failed to unlock after 3 attempts.

  The most common issues that will cause an LO Door Unlock Error to display on a Samsung Washer are:

  • The door switch is defective.
  • The main PCB is defective.
  • Loose wiring connection at the door switch or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the LO code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does nd mean on a Samsung Washer?

  If your Samsung Washer is displaying an nd fault code, it is indicating a Drain System Error has been detected by the internal self diagnostics system.

  An nd Drain System Error will set if the control board detects The water level signal fails to drop below the reset point 15 to 30 minutes after the drain operation starts.

  The most common issues that will cause an nd Drain System Error to display on a Samsung Washer are:

  • The drain pump is defective.
  • The drain pump or hose is blocked.
  • The main PCB is defective.
  • Loose wiring connection at the drain pump or main PCB

  Try turning the Washer main power supply off for 1 minute. If the nd code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does nF mean on a Samsung Washer?

  If your Samsung Washer is displaying an nF fault code, it is indicating a Water Filling System Error has been detected by the internal self diagnostics system.

  An nF Water Filling System Error will set if the control board detects Water filling time is over 16 minutes or there is no change in water level for 3 to 5 minutes after the water supply starts.

  The most common issues that will cause an nF Water Filling System Error to display on a Samsung Washer are:

  • The water supply is not turned on or has very low pressure.
  • The water hose is plugged.
  • The water valve is defective.
  • The main PCB is defective.
  • Loose wiring connection at the water valve or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the nF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does nF1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an nF1 fault code, it is indicating a Water Temperature Sensor Error has been detected by the internal self diagnostics system.

  An nF1 Water Temperature Sensor Error will set if the control board detects Abnormal water temperature is sensed on the initial water supply.

  The most common issues that will cause an nF1 Water Temperature Sensor Error to display on a Samsung Washer are:

  • The hot or cold water hose connection is incorrect.
  • The thermistor is defective.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the nF1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does OC mean on a Samsung Washer?

  If your Samsung Washer is displaying an OC fault code, it is indicating a Over Fill Error has been detected by the internal self diagnostics system.

  An OC Over Fill Error will set if the control board detects The water level is at or above the overfill level is detected by the water level sensor.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an OC Over Fill Error to display on a Samsung Washer are:

  • The washer has overfilled.
  • One of the water fill valves is stuck open or leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the OC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does OE mean on a Samsung Washer?

  If your Samsung Washer is displaying an OE fault code, it is indicating a Over Fill Error has been detected by the internal self diagnostics system.

  An OE Over Fill Error will set if the control board detects The water level is at or above the overfill level is detected by the water level sensor.
  Once the error occurs the drain pump will be turned on automatically and will stay on regardless the operating condition.

  The most common issues that will cause an OE Over Fill Error to display on a Samsung Washer are:

  • The washer has overfilled.
  • One of the water fill valves is stuck open or leaking.
  • Loose wire connection on the pressure switch terminal.
  • Loose wire connection on the PCB terminal.
  • Defective water level sensor.
  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the OE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does PC mean on a Samsung Washer?

  If your Samsung Washer is displaying an PC fault code, it is indicating a Clutch Motor Error (Top Load Models Only) has been detected by the internal self diagnostics system.

  An PC Clutch Motor Error (Top Load Models Only) will set if the control board detects The clutch is not in position or there is no ready signal feedback to the PCB 15 seconds after the clutch motor starts.

  The most common issues that will cause an PC Clutch Motor Error (Top Load Models Only) to display on a Samsung Washer are:

  • The clutch motor is defective.
  • The main PCB is defective.
  • Loose wire connection at the clutch motor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the PC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does PC1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an PC1 fault code, it is indicating a Clutch Motor Hall Sensor Error (Top Load Models Only) has been detected by the internal self diagnostics system.

  An PC1 Clutch Motor Hall Sensor Error (Top Load Models Only) will set if the control board detects The clutch hall sensor signal is abnormal after the clutch position detection is completed.

  The most common issues that will cause an PC1 Clutch Motor Hall Sensor Error (Top Load Models Only) to display on a Samsung Washer are:

  • The clutch is defective.
  • The hall sensor is defective.
  • The main PCB is defective.
  • Loose wire connection at hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the PC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does PE mean on a Samsung Washer?

  If your Samsung Washer is displaying an PE fault code, it is indicating a Clutch Motor Error (Top Load Models Only) has been detected by the internal self diagnostics system.

  An PE Clutch Motor Error (Top Load Models Only) will set if the control board detects The clutch is not in position or there is no ready signal feedback to the PCB 15 seconds after the clutch motor starts.

  The most common issues that will cause an PE Clutch Motor Error (Top Load Models Only) to display on a Samsung Washer are:

  • The clutch motor is defective.
  • The main PCB is defective.
  • Loose wire connection at the clutch motor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the PE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does PE1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an PE1 fault code, it is indicating a Clutch Motor Hall Sensor Error (Top Load Models Only) has been detected by the internal self diagnostics system.

  An PE1 Clutch Motor Hall Sensor Error (Top Load Models Only) will set if the control board detects The clutch hall sensor signal is abnormal after the clutch position detection is completed.

  The most common issues that will cause an PE1 Clutch Motor Hall Sensor Error (Top Load Models Only) to display on a Samsung Washer are:

  • The clutch is defective.
  • The hall sensor is defective.
  • The main PCB is defective.
  • Loose wire connection at hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the PE1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does PF mean on a Samsung Washer?

  If your Samsung Washer is displaying an PF fault code, it is indicating a Power Failure has been detected by the internal self diagnostics system.

  An PF Power Failure will set if the control board detects There is power failure during the wash or rinse operation.

  The most common issues that will cause an PF Power Failure to display on a Samsung Washer are:

  • “PF” is not an error. It is to inform the user of power failure.

  Try turning the Washer main power supply off for 1 minute. If the PF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Sd mean on a Samsung Washer?

  If your Samsung Washer is displaying an Sd fault code, it is indicating a Over Sud Error has been detected by the internal self diagnostics system.

  An Sd Over Sud Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

  The most common issues that will cause an Sd Over Sud Error to display on a Samsung Washer are:

  • Too much detergent been used.

  Try turning the Washer main power supply off for 1 minute. If the Sd code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does SF mean on a Samsung Washer?

  If your Samsung Washer is displaying an SF fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

  An SF PCB Error will set if the control board detects Internal main PCB system error.

  The most common issues that will cause an SF PCB Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the SF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does SF1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an SF1 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

  An SF1 PCB Error will set if the control board detects Internal main PCB system error.

  The most common issues that will cause an SF1 PCB Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the SF1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does SF2 mean on a Samsung Washer?

  If your Samsung Washer is displaying an SF2 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

  An SF2 PCB Error will set if the control board detects Internal main PCB system error.

  The most common issues that will cause an SF2 PCB Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the SF2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does SF3 mean on a Samsung Washer?

  If your Samsung Washer is displaying an SF3 fault code, it is indicating a PCB Error has been detected by the internal self diagnostics system.

  An SF3 PCB Error will set if the control board detects Internal main PCB system error.

  The most common issues that will cause an SF3 PCB Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the SF3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Sr mean on a Samsung Washer?

  If your Samsung Washer is displaying an Sr fault code, it is indicating a System Relay Error has been detected by the internal self diagnostics system.

  An Sr System Relay Error will set if the control board detects Here is no system relay operation when there should be.

  The most common issues that will cause an Sr System Relay Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the Sr code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does SUdS mean on a Samsung Washer?

  If your Samsung Washer is displaying an SUdS fault code, it is indicating a Over Sud Error has been detected by the internal self diagnostics system.

  An SUdS Over Sud Error will set if the control board detects Excessive suds are detected during the wash or rinse cycle.

  The most common issues that will cause an SUdS Over Sud Error to display on a Samsung Washer are:

  • Too much detergent been used.

  Try turning the Washer main power supply off for 1 minute. If the SUdS code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does tC mean on a Samsung Washer?

  If your Samsung Washer is displaying an tC fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

  An tC Thermistor Error will set if the control board detects There is no signal feedback from the thermistor to the main PCB for 5 seconds or longer.

  The most common issues that will cause an tC Thermistor Error to display on a Samsung Washer are:

  • The thermistor is defective.
  • The main PCB is defective.
  • Loose wire connection at the thermistor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the tC code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does tC1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an tC1 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

  An tC1 Thermistor Error will set if the control board detects There is no signal feedback from the thermistor to the main PCB for 5 seconds or longer.

  The most common issues that will cause an tC1 Thermistor Error to display on a Samsung Washer are:

  • The thermistor is defective.
  • The main PCB is defective.
  • Loose wire connection at the thermistor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the tC1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does tC4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an tC4 fault code, it is indicating a IPM or PCB Temperature Error has been detected by the internal self diagnostics system.

  An tC4 IPM or PCB Temperature Error will set if the control board detects The temperature of the Intelligent Power Module (IPM) of the main PCB is abnormal or the thermistor of the main PCB is defective.

  The most common issues that will cause an tC4 IPM or PCB Temperature Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the tC4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does tE mean on a Samsung Washer?

  If your Samsung Washer is displaying an tE fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

  An tE Thermistor Error will set if the control board detects There is no signal feedback from the thermistor to the main PCB for 5 seconds or longer.

  The most common issues that will cause an tE Thermistor Error to display on a Samsung Washer are:

  • The thermistor is defective.
  • The main PCB is defective.
  • Loose wire connection at the thermistor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the tE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does tE1 mean on a Samsung Washer?

  If your Samsung Washer is displaying an tE1 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.

  An tE1 Thermistor Error will set if the control board detects There is no signal feedback from the thermistor to the main PCB for 5 seconds or longer.

  The most common issues that will cause an tE1 Thermistor Error to display on a Samsung Washer are:

  • The thermistor is defective.
  • The main PCB is defective.
  • Loose wire connection at the thermistor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the tE1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does tE4 mean on a Samsung Washer?

  If your Samsung Washer is displaying an tE4 fault code, it is indicating a IPM or PCB Temperature Error has been detected by the internal self diagnostics system.

  An tE4 IPM or PCB Temperature Error will set if the control board detects The temperature of the Intelligent Power Module (IPM) of the main PCB is abnormal or the thermistor of the main PCB is defective.

  The most common issues that will cause an tE4 IPM or PCB Temperature Error to display on a Samsung Washer are:

  • The main PCB is defective.

  Try turning the Washer main power supply off for 1 minute. If the tE4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Ub mean on a Samsung Washer?

  If your Samsung Washer is displaying an Ub fault code, it is indicating a Load Balance Issue or Hall Sensor Error has been detected by the internal self diagnostics system.

  An Ub Load Balance Issue or Hall Sensor Error will set if the control board detects Drum imbalance or cabinet bump is detected by hall sensor during final spin.

  The most common issues that will cause an Ub Load Balance Issue or Hall Sensor Error to display on a Samsung Washer are:

  • Extremely unbalanced load.
  • The hall sensor is defective.
  • Loose wiring connection at the hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the Ub code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does UE mean on a Samsung Washer?

  If your Samsung Washer is displaying an UE fault code, it is indicating a Load Balance Issue or Hall Sensor Error has been detected by the internal self diagnostics system.

  An UE Load Balance Issue or Hall Sensor Error will set if the control board detects Drum imbalance or cabinet bump is detected by hall sensor during final spin.

  The most common issues that will cause an UE Load Balance Issue or Hall Sensor Error to display on a Samsung Washer are:

  • Extremely unbalanced load.
  • The hall sensor is defective.
  • Loose wiring connection at the hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the UE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  What does Ur mean on a Samsung Washer?

  If your Samsung Washer is displaying an Ur fault code, it is indicating a Load Balance Issue or Hall Sensor Error has been detected by the internal self diagnostics system.

  An Ur Load Balance Issue or Hall Sensor Error will set if the control board detects Drum imbalance or cabinet bump is detected by hall sensor during final spin.

  The most common issues that will cause an Ur Load Balance Issue or Hall Sensor Error to display on a Samsung Washer are:

  • Extremely unbalanced load.
  • The hall sensor is defective.
  • Loose wiring connection at the hall sensor or main PCB.

  Try turning the Washer main power supply off for 1 minute. If the Ur code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

  Samsung Washer Error Codes Disclaimer

  The Samsung Washer Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.