Select form the list of Electrolux Microwave error codes below for the code meaning and possible issues that may be causing the fault to display.
The Electrolux Microwave error codes listed above may also apply to the following brands.
- AEG Microwave error codes.
- Anova Microwave error codes.
- Frigidaire Microwave error codes.
- Westinghouse Microwave error codes.
- Zanussi Microwave error codes.
Why is my Electrolux Microwave displaying error codes?
Your Electrolux Microwave will display error codes when the main control panel internal diagnostics system has detected a problem.
How can I reset Electrolux Microwave Error Codes
The first thing to try is switching the Microwave main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.
If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.
Why is my Electrolux Microwave not working?
Some Electrolux Microwave error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.
What does E-3 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-3 fault code, it is indicating a Temperature Error has been detected by the internal self diagnostics system.
An E-3 Temperature Error will set if the control board detects The microwave failed to reach the minimum temperature within 3 min.
The most common issues that will cause an E-3 Temperature Error to display on an Electrolux Microwave are:
- The heating element is defective.
- The convection fan motor is defective.
- The main PCB is defective.
- The temperature sensor is defective.
- Wiring issue.
Try turning the Microwave main power supply off for 1 minute. If the E-3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-4 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-4 fault code, it is indicating a Preheat Error has been detected by the internal self diagnostics system.
An E-4 Preheat Error will set if the control board detects The microwave failed to reach the desired preheat temperature within 30 min.
The most common issues that will cause an E-4 Preheat Error to display on an Electrolux Microwave are:
- N/A
Try turning the Microwave main power supply off for 1 minute. If the E-4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-11 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-11 fault code, it is indicating a Humidity Sensor Error has been detected by the internal self diagnostics system.
An E-11 Humidity Sensor Error will set if the control board detects The humidity sensor is open.
The most common issues that will cause an E-11 Humidity Sensor Error to display on an Electrolux Microwave are:
- The main PCB is defective.
- The humidity sensor is defective.
- Wiring issue between the main PCB and the humidity sensor.
Try turning the Microwave main power supply off for 1 minute. If the E-11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-12 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-12 fault code, it is indicating a Humidity Sensor Error has been detected by the internal self diagnostics system.
An E-12 Humidity Sensor Error will set if the control board detects The humidity sensor is shorted.
The most common issues that will cause an E-12 Humidity Sensor Error to display on an Electrolux Microwave are:
- The main PCB is defective.
- The humidity sensor is defective.
- Wiring issue between the main PCB and the humidity sensor.
Try turning the Microwave main power supply off for 1 minute. If the E-12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-21 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-21 fault code, it is indicating a Thermal Sensor Error has been detected by the internal self diagnostics system.
An E-21 Thermal Sensor Error will set if the control board detects The thermal sensor is open.
The most common issues that will cause an E-21 Thermal Sensor Error to display on an Electrolux Microwave are:
- The main PCB is defective.
- The thermal sensor is defective.
- Wiring issue between the main PCB and the thermal sensor.
Try turning the Microwave main power supply off for 1 minute. If the E-21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-22 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-22 fault code, it is indicating a Thermal Sensor Error has been detected by the internal self diagnostics system.
An E-22 Thermal Sensor Error will set if the control board detects The thermal sensor is shorted.
The most common issues that will cause an E-22 Thermal Sensor Error to display on an Electrolux Microwave are:
- The main PCB is defective.
- The thermal sensor is defective.
- Wiring issue between the main PCB and the thermal sensor.
Try turning the Microwave main power supply off for 1 minute. If the E-22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-23 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-23 fault code, it is indicating a Preheat Error has been detected by the internal self diagnostics system.
An E-23 Preheat Error will set if the control board detects The microwave failed to reach the desired preheat temperature within 30 min.
The most common issues that will cause an E-23 Preheat Error to display on an Electrolux Microwave are:
- N/A
Try turning the Microwave main power supply off for 1 minute. If the E-23 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E-24 mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an E-24 fault code, it is indicating a Over Temperature Error has been detected by the internal self diagnostics system.
An E-24 Over Temperature Error will set if the control board detects Open temperature probe or the probe is not plugged in during a temp cook function.
The most common issues that will cause an E-24 Over Temperature Error to display on an Electrolux Microwave are:
- The main PCB is defective.
- The thermal sensor is defective.
- Wiring issue between the main PCB and the thermal sensor.
Try turning the Microwave main power supply off for 1 minute. If the E-24 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does SE mean on an Electrolux Microwave?
If your Electrolux Microwave is displaying an SE fault code, it is indicating a Shorted Key Error has been detected by the internal self diagnostics system.
An SE Shorted Key Error will set if the control board detects A button is stuck or held.
The most common issues that will cause an SE Shorted Key Error to display on an Electrolux Microwave are:
- The keypad is defective.
- The microwave control PCB is defective.
- Wiring issue between the keypad and the control PCB.
Try turning the Microwave main power supply off for 1 minute. If the SE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
Electrolux Microwave Error Codes Disclaimer
The Electrolux Microwave Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.