Whirlpool Oven Error Codes - Appliance Fault Codes

The first thing to try is switching the Oven main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Whirlpool Oven not working?

Some Whirlpool Oven error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does 1c1c mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c1c fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An 1c1c Keypad Error will set if the control board detects Shorted key.

The most common issues that will cause an 1c1c Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1c1c code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1c2c mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c2c fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An 1c2c Keypad Error will set if the control board detects Keyboard tail disconnected.

The most common issues that will cause an 1c2c Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1c2c code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1c31 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c31 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An 1c31 Keypad Error will set if the control board detects Cancel key circuit problem.

The most common issues that will cause an 1c31 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1c31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1c32 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c32 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An 1c32 Keypad Error will set if the control board detects Cancel key circuit problem.

The most common issues that will cause an 1c32 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1c32 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1c6c mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c6c fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1c6c Oven Control Error will set if the control board detects EEPROM error.

The most common issues that will cause an 1c6c Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the 1c6c code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1c7c mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c7c fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1c7c Oven Control Error will set if the control board detects Control not calibrated.

The most common issues that will cause an 1c7c Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the 1c7c code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1c8c mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1c8c fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1c8c Oven Control Error will set if the control board detects Cooking program error.

The most common issues that will cause an 1c8c Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the 1c8c code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1d11 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1d11 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1d11 Oven Control Error will set if the control board detects Runaway temp (650∞F), door unlocked.

The most common issues that will cause an 1d11 Oven Control Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1d11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1d12 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1d12 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1d12 Oven Control Error will set if the control board detects Runaway temp (650∞F), door unlocked.

The most common issues that will cause an 1d12 Oven Control Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1d12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1d21 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1d21 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1d21 Oven Control Error will set if the control board detects Runaway temp (950∞F), door locked.

The most common issues that will cause an 1d21 Oven Control Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1d21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 1d22 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 1d22 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An 1d22 Oven Control Error will set if the control board detects Runaway temp (950∞F), door locked.

The most common issues that will cause an 1d22 Oven Control Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 1d22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 3d11 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 3d11 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An 3d11 Oven Temperature Sensor Error will set if the control board detects Upper oven sensor open.

The most common issues that will cause an 3d11 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 3d11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 3d12 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 3d12 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An 3d12 Oven Temperature Sensor Error will set if the control board detects Lower oven sensor open.

The most common issues that will cause an 3d12 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 3d12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 3d21 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 3d21 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An 3d21 Oven Temperature Sensor Error will set if the control board detects Upper oven sensor shorted.

The most common issues that will cause an 3d21 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 3d21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 3d22 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 3d22 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An 3d22 Oven Temperature Sensor Error will set if the control board detects Lower oven sensor shorted.

The most common issues that will cause an 3d22 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 3d22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 4d11 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 4d11 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 4d11 Latch Error will set if the control board detects Door switch position failure

The most common issues that will cause an 4d11 Latch Error to display on a Whirlpool Oven are:

The oven door switch is defective.
The oven control PCB is defective.
Wiring issue between the oven door switch and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 4d11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 4d12 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 4d12 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 4d12 Latch Error will set if the control board detects Door switch position failure

The most common issues that will cause an 4d12 Latch Error to display on a Whirlpool Oven are:

The oven door switch is defective.
The oven control PCB is defective.
Wiring issue between the oven door switch and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 4d12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 4d21 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 4d21 fault code, it is indicating a Fan Error has been detected by the internal self diagnostics system.

An 4d21 Fan Error will set if the control board detects No reverse airflow fan rotation (no/low RPM)

The most common issues that will cause an 4d21 Fan Error to display on a Whirlpool Oven are:

The oven fan motor is defective.
The oven control PCB is defective.
Wiring issue between the oven fan motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 4d21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 4d31 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 4d31 fault code, it is indicating a Fan Error has been detected by the internal self diagnostics system.

An 4d31 Fan Error will set if the control board detects Reverse airflow fan state (on when should be off)

The most common issues that will cause an 4d31 Fan Error to display on a Whirlpool Oven are:

The oven fan motor is defective.
The oven control PCB is defective.
Wiring issue between the oven fan motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 4d31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 4d51 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 4d51 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 4d51 Latch Error will set if the control board detects Door switch circuit failure

The most common issues that will cause an 4d51 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 4d51 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 4d52 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 4d52 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 4d52 Latch Error will set if the control board detects Door switch circuit failure

The most common issues that will cause an 4d52 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 4d52 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 9d11 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 9d11 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 9d11 Latch Error will set if the control board detects Latch will not lock

The most common issues that will cause an 9d11 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 9d11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 9d12 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 9d12 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 9d12 Latch Error will set if the control board detects Latch will not lock

The most common issues that will cause an 9d12 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 9d12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 9d21 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 9d21 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 9d21 Latch Error will set if the control board detects Latch will not unlock

The most common issues that will cause an 9d21 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 9d21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 9d22 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 9d22 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 9d22 Latch Error will set if the control board detects Latch will not unlock

The most common issues that will cause an 9d22 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 9d22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 9d31 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 9d31 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 9d31 Latch Error will set if the control board detects Latch state unknown, both locked and unlocked

The most common issues that will cause an 9d31 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 9d31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 9d32 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an 9d32 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An 9d32 Latch Error will set if the control board detects Latch state unknown, both locked and unlocked

The most common issues that will cause an 9d32 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the 9d32 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1 Oven Control Error will set if the control board detects The oven control has an internal fault.

The most common issues that will cause an F1 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F2 fault code, it is indicating a Oven Overheating Error has been detected by the internal self diagnostics system.

An F2 Oven Overheating Error will set if the control board detects Oven Temperature Is Too High

The most common issues that will cause an F2 Oven Overheating Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F3 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An F3 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is open.

The most common issues that will cause an F3 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F4 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F4 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An F4 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is shorted.

The most common issues that will cause an F4 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F5 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F5 Oven Control Error will set if the control board detects The oven control has an internal fault.

The most common issues that will cause an F5 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F7 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An F7 Keypad Error will set if the control board detects Function Key Stuck

The most common issues that will cause an F7 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F8 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F8 Oven Control Error will set if the control board detects The oven control has an internal fault.

The most common issues that will cause an F8 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F9 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F9 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An F9 Latch Error will set if the control board detects Oven Door Lock Failure

The most common issues that will cause an F9 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E0 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E0 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E0 Oven Control Error will set if the control board detects EEPROM Communication Error

The most common issues that will cause an F1-E0 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E1 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E1 Oven Control Error will set if the control board detects EEPROM Checksum Error

The most common issues that will cause an F1-E1 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E2 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E2 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E2 Oven Control Error will set if the control board detects UL A/D Error

The most common issues that will cause an F1-E2 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E3 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E3 fault code, it is indicating a Oven Size Error has been detected by the internal self diagnostics system.

An F1-E3 Oven Size Error will set if the control board detects Wiring Harness Cavity Size Does Not Match Stored Value

The most common issues that will cause an F1-E3 Oven Size Error to display on a Whirlpool Oven are:

Check the jumpers in the harness to make sure they agree with the actual oven size.

Try turning the Oven main power supply off for 1 minute. If the F1-E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E4 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E4 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E4 Oven Control Error will set if the control board detects Model ID Error

The most common issues that will cause an F1-E4 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E5 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E5 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E5 Oven Control Error will set if the control board detects Calibration Shifted

The most common issues that will cause an F1-E5 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E6 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E6 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E6 Oven Control Error will set if the control board detects Latch Signal Mismatch Error

The most common issues that will cause an F1-E6 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1-E9 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F1-E9 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1-E9 Oven Control Error will set if the control board detects Stack Overflow

The most common issues that will cause an F1-E9 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F1-E9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E0 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F2-E0 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An F2-E0 Keypad Error will set if the control board detects Shorted Touch Pad

The most common issues that will cause an F2-E0 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F2-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F2-E1 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An F2-E1 Keypad Error will set if the control board detects Shorted Touch Pad

The most common issues that will cause an F2-E1 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F2-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E5 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F2-E5 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An F2-E5 Keypad Error will set if the control board detects Cancel Key Line Open

The most common issues that will cause an F2-E5 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F2-E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2-E6 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F2-E6 fault code, it is indicating a Keypad Error has been detected by the internal self diagnostics system.

An F2-E6 Keypad Error will set if the control board detects Cancel Key Line Open

The most common issues that will cause an F2-E6 Keypad Error to display on a Whirlpool Oven are:

The keypad is defective.
The oven control PCB is defective.
Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F2-E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E0 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F3-E0 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An F3-E0 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is open or shorted.

The most common issues that will cause an F3-E0 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F3-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F3-E1 fault code, it is indicating a Oven Temperature Sensor Error has been detected by the internal self diagnostics system.

An F3-E1 Oven Temperature Sensor Error will set if the control board detects The oven temperature sensor is shorted or under 930Ω.

The most common issues that will cause an F3-E1 Oven Temperature Sensor Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F3-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E2 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F3-E2 fault code, it is indicating a Oven Overheating Error has been detected by the internal self diagnostics system.

An F3-E2 Oven Overheating Error will set if the control board detects The temperature of the oven is higher than 650 ̊F (343 ̊c) while oven is on and not in self-cleaning mode.

The most common issues that will cause an F3-E2 Oven Overheating Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F3-E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3-E3 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F3-E3 fault code, it is indicating a Oven Overheating Error has been detected by the internal self diagnostics system.

An F3-E3 Oven Overheating Error will set if the control board detects The temperature of the oven is higher than 950 ̊F while oven is in self-cleaning mode.

The most common issues that will cause an F3-E3 Oven Overheating Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F3-E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F4-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F4-E1 fault code, it is indicating a Meat Probe Error has been detected by the internal self diagnostics system.

An F4-E1 Meat Probe Error will set if the control board detects The meat probe is open or shorted.

The most common issues that will cause an F4-E1 Meat Probe Error to display on a Whirlpool Oven are:

The meat probe is defective.
The oven control PCB is defective.
Wiring issue between the meat probe and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F4-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E0 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F5-E0 fault code, it is indicating a Door Locking Error has been detected by the internal self diagnostics system.

An F5-E0 Door Locking Error will set if the control board detects The door is open when the latch is in the locked position.

The most common issues that will cause an F5-E0 Door Locking Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F5-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F5-E1 fault code, it is indicating a Door Locking Error has been detected by the internal self diagnostics system.

An F5-E1 Door Locking Error will set if the control board detects The door is not locked 1 minute after the lock (self-clean) function is initiated.

The most common issues that will cause an F5-E1 Door Locking Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F5-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F6-E0 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F6-E0 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F6-E0 Oven Control Error will set if the control board detects Return Line Not Connected

The most common issues that will cause an F6-E0 Oven Control Error to display on a Whirlpool Oven are:

The oven control is defective.

Try turning the Oven main power supply off for 1 minute. If the F6-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F6-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F6-E1 fault code, it is indicating a Oven Over Temperature Error has been detected by the internal self diagnostics system.

An F6-E1 Oven Over Temperature Error will set if the control board detects The oven temperature reached 600 deg F, not in the self clean cycle.

The most common issues that will cause an F6-E1 Oven Over Temperature Error to display on a Whirlpool Oven are:

The oven temperature sensor is defective.
The oven control PCB is defective.
Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F6-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-E1 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F7-E1 fault code, it is indicating a Latch Error has been detected by the internal self diagnostics system.

An F7-E1 Latch Error will set if the control board detects Common Switch Wire Is Defective

The most common issues that will cause an F7-E1 Latch Error to display on a Whirlpool Oven are:

The door lock switch is defective.
The door lock motor is defective.
The oven control PCB is defective.
Wiring issue between the door lock switch and the control PCB.
Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F7-E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F9-E0 mean on a Whirlpool Oven?

If your Whirlpool Oven is displaying an F9-E0 fault code, it is indicating a Voltage Error has been detected by the internal self diagnostics system.

An F9-E0 Voltage Error will set if the control board detects The supply voltage is improperly wired.

The most common issues that will cause an F9-E0 Voltage Error to display on a Whirlpool Oven are:

The power supply is wired improperly.
The oven is wired improperly.
The oven control PCB is defective.

Try turning the Oven main power supply off for 1 minute. If the F9-E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Whirlpool Oven Error Codes Disclaimer

The Whirlpool Oven Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.