Select form the list of Whirlpool Fridge error codes below for the code meaning and possible issues that may be causing the fault to display.
The Whirlpool Fridge error codes listed above may also apply to the following brands.
- Admiral Fridge error codes.
- Amana Fridge error codes.
- Caloric Fridge error codes.
- Crosley Fridge error codes.
- Estate Fridge error codes.
- Hardwick Fridge error codes.
- Ikea Fridge error codes.
- Inglis Fridge error codes.
- Jenn-Air Fridge error codes.
- KitchenAid Fridge error codes.
- Magic Chef Fridge error codes.
- Maytag Fridge error codes.
- Modern Maid Fridge error codes.
- Norge Fridge error codes.
- Roper Fridge error codes.
Why is my Whirlpool Fridge displaying error codes?
Your Whirlpool Fridge will display error codes when the main control panel internal diagnostics system has detected a problem.
How can I reset Whirlpool Fridge Error Codes
The first thing to try is switching the Fridge main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.
If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.
Why is my Whirlpool Fridge not working?
Some Whirlpool Fridge error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.
What does C mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an C fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.
An C Thermistor Error will set if the control board detects The thermistor signal is invalid.
The most common issues that will cause an C Thermistor Error to display on a Whirlpool Fridge are:
- The thermistor (temperature sensor) is defective in the compartment displaying the error.
- The main PCB is defective.
- Wiring issue between the thermistor (temperature sensor) and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the C code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does CF mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an CF fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.
An CF Communication Error will set if the control board detects Communication error between control boards
The most common issues that will cause an CF Communication Error to display on a Whirlpool Fridge are:
- Faulty main control board.
- Faulty UI control board.
- Wiring issue between main and UI control board.
- Electrical power surge.
Try turning the Fridge main power supply off for 1 minute. If the CF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does d mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an d fault code, it is indicating a Air Damper Error has been detected by the internal self diagnostics system.
An d Air Damper Error will set if the control board detects The air damper is stuck or faulty.
The most common issues that will cause an d Air Damper Error to display on a Whirlpool Fridge are:
- The damper motor is stuck or defective.
- The main PCB is defective.
- Wiring issue between the damper and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the d code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E0 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E0 fault code, it is indicating a Ice Maker Error has been detected by the internal self diagnostics system.
An E0 Ice Maker Error will set if the control board detects Check the ice maker for proper operation.
The most common issues that will cause an E0 Ice Maker Error to display on a Whirlpool Fridge are:
- Faulty ice maker.
- Faulty wiring to ice maker.
Try turning the Fridge main power supply off for 1 minute. If the E0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E1 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E1 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.
An E1 Thermistor Error will set if the control board detects The refrigerator cabinet thermistor (temperature sensor) signal is invalid.
The most common issues that will cause an E1 Thermistor Error to display on a Whirlpool Fridge are:
- The thermistor (temperature sensor) is defective.
- The main PCB is defective.
- Wiring issue between the thermistor (temperature sensor) and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the E1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E2 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E2 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.
An E2 Thermistor Error will set if the control board detects The freezer cabinet thermistor (temperature sensor) signal is invalid.
The most common issues that will cause an E2 Thermistor Error to display on a Whirlpool Fridge are:
- The thermistor (temperature sensor) is defective.
- The main PCB is defective.
- Wiring issue between the thermistor (temperature sensor) and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the E2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E3 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E3 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.
An E3 Thermistor Error will set if the control board detects The defrost thermistor (temperature sensor) signal is invalid.
The most common issues that will cause an E3 Thermistor Error to display on a Whirlpool Fridge are:
- The thermistor (temperature sensor) is defective.
- The main PCB is defective.
- Wiring issue between the thermistor (temperature sensor) and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the E3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E4 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E4 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.
An E4 Thermistor Error will set if the control board detects The refrigerator evaporator thermistor (temperature sensor) signal is invalid.
The most common issues that will cause an E4 Thermistor Error to display on a Whirlpool Fridge are:
- The thermistor (temperature sensor) is defective.
- The main PCB is defective.
- Wiring issue between the thermistor (temperature sensor) and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the E4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E5 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E5 fault code, it is indicating a Thermistor Error has been detected by the internal self diagnostics system.
An E5 Thermistor Error will set if the control board detects The freezer evaporator thermistor (temperature sensor) signal is invalid.
The most common issues that will cause an E5 Thermistor Error to display on a Whirlpool Fridge are:
- The thermistor (temperature sensor) is defective.
- The main PCB is defective.
- Wiring issue between the thermistor (temperature sensor) and the main PCB.
Try turning the Fridge main power supply off for 1 minute. If the E5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E6 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E6 fault code, it is indicating a Control Board Error has been detected by the internal self diagnostics system.
An E6 Control Board Error will set if the control board detects Unplug the refrigerator for 5 minutes and then plugging it back in. The control board may have experienced a power surge.
The most common issues that will cause an E6 Control Board Error to display on a Whirlpool Fridge are:
- Faulty main control board.
- Electrical power surge.
Try turning the Fridge main power supply off for 1 minute. If the E6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E7 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E7 fault code, it is indicating a Environmental Sensor Error has been detected by the internal self diagnostics system.
An E7 Environmental Sensor Error will set if the control board detects N/A
The most common issues that will cause an E7 Environmental Sensor Error to display on a Whirlpool Fridge are:
- Consult the service manual or tech sheet for further information.
Try turning the Fridge main power supply off for 1 minute. If the E7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does E8 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an E8 fault code, it is indicating a has been detected by the internal self diagnostics system.
An E8 will set if the control board detects N/A
The most common issues that will cause an E8 to display on a Whirlpool Fridge are:
- Consult the service manual or tech sheet for further information.
Try turning the Fridge main power supply off for 1 minute. If the E8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does EE mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an EE fault code, it is indicating a Ice Maker Error has been detected by the internal self diagnostics system.
An EE Ice Maker Error will set if the control board detects Check the ice maker for proper operation.
The most common issues that will cause an EE Ice Maker Error to display on a Whirlpool Fridge are:
- Faulty ice maker.
- Faulty wiring to ice maker.
Try turning the Fridge main power supply off for 1 minute. If the EE code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does F9 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an F9 fault code, it is indicating a High Temp Error has been detected by the internal self diagnostics system.
An F9 High Temp Error will set if the control board detects Check frozen food for thawing because the temperature is rising too high.
The most common issues that will cause an F9 High Temp Error to display on a Whirlpool Fridge are:
- The fridge or freezer door is not closing properly.
- Cooling system fault.
- Faulty door gasket.
Try turning the Fridge main power supply off for 1 minute. If the F9 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
What does P0 mean on a Whirlpool Fridge?
If your Whirlpool Fridge is displaying an P0 fault code, it is indicating a Power Failure Error has been detected by the internal self diagnostics system.
An P0 Power Failure Error will set if the control board detects The power to the refrigerator has been interrupted.
The most common issues that will cause an P0 Power Failure Error to display on a Whirlpool Fridge are:
- The power supply to the refrigerator has been off and the freezer temperature has risen to 18°F (-8°C) or higher. Press MEASURED FILL under “Confirm”. The “PO” message will disappear, and the display will return to the Home screen.
Try turning the Fridge main power supply off for 1 minute. If the P0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error
Whirlpool Fridge Error Codes Disclaimer
The Whirlpool Fridge Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.