Electrolux Oven Error Codes

Select form the list of Electrolux Oven error codes below for the code meaning and possible issues that may be causing the fault to display.

The Electrolux Oven error codes listed above may also apply to the following brands.

• AEG Oven error codes.
• Anova Oven error codes.
• Frigidaire Oven error codes.
• Westinghouse Oven error codes.
• Zanussi Oven error codes.

Why is my Electrolux Oven displaying error codes?

Your Electrolux Oven will display error codes when the main control panel internal diagnostics system has detected a problem.

How can I reset Electrolux Oven Error Codes

The first thing to try is switching the Oven main power supply off for 60 seconds. This usual only works if the fault was set due to a supply voltage fluctuation from a storm or power outage. It may also work if the problem is intermittent. Unfortunately this might only be a short term solution because if the problem is intermittent and the fault returns, the error code will display again.

If that doesn’t work, the problem triggering the error code will need to be repaired in order to clear the fault code.

Why is my Electrolux Oven not working?

Some Electrolux Oven error codes will disable the appliance from operating. The error code will need to be resolved in order for the appliance to function normally again.

What does 11 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 11 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 11 Induction Cooktop Error will set if the control board detects Jammed key.

The most common issues that will cause an 11 Induction Cooktop Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Touch Panel is defective.
• Harness connection issue between the Electronic Surface Element Control User Interface Board and the Touch Panel.

Try turning the Oven main power supply off for 1 minute. If the 11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 14 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 14 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 14 Induction Cooktop Error will set if the control board detects Touch panel tail missing.

The most common issues that will cause an 14 Induction Cooktop Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Touch Panel is defective.
• Harness connection issue between the Electronic Surface Element Control User Interface Board and the Touch Panel.

Try turning the Oven main power supply off for 1 minute. If the 14 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 15 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 15 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 15 Induction Cooktop Error will set if the control board detects Electronic Surface Element Control internal error.

The most common issues that will cause an 15 Induction Cooktop Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 15 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 21 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 21 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 21 Induction Cooktop Error will set if the control board detects Lin (Local Interconnect Network) error, no communications, shorted bus.

The most common issues that will cause an 21 Induction Cooktop Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Electronic Surface Element Control User Interface Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 30 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 30 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 30 Induction Cooktop Error will set if the control board detects AC input voltage too high, Induction Housing Assembly.

The most common issues that will cause an 30 Induction Cooktop Error to display on an Electrolux Oven are:

• Home power supply voltage issue.
• The Filter Circuit Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 30 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 31 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 31 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 31 Induction Cooktop Error will set if the control board detects Internal generator error, sync Induction Housing Assembly / Left side cooking zones.

The most common issues that will cause an 31 Induction Cooktop Error to display on an Electrolux Oven are:

• Home power supply voltage issue.
• The Filter Circuit Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 32 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 32 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 32 Induction Cooktop Error will set if the control board detects Power Supply defect, Induction Housing Assembly / Left side cooking zones.

The most common issues that will cause an 32 Induction Cooktop Error to display on an Electrolux Oven are:

• The Left Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 32 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 33 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 33 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 33 Induction Cooktop Error will set if the control board detects Power Supply defect, Induction Housing Assembly / Left side cooking zones.

The most common issues that will cause an 33 Induction Cooktop Error to display on an Electrolux Oven are:

• The Left Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 33 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 34 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 34 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 34 Induction Cooktop Error will set if the control board detects Internal generator error, communication, Induction Housing Assembly / Left side cooking zones.

The most common issues that will cause an 34 Induction Cooktop Error to display on an Electrolux Oven are:

• The Left Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 34 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 35 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 35 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 35 Induction Cooktop Error will set if the control board detects AC input voltage too low, Induction Housing Assembly.

The most common issues that will cause an 35 Induction Cooktop Error to display on an Electrolux Oven are:

• Home power supply voltage issue.
• The Filter Circuit Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 35 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 36 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 36 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 36 Induction Cooktop Error will set if the control board detects Communication error, Induction Housing Assembly / Left side cooking zones

The most common issues that will cause an 36 Induction Cooktop Error to display on an Electrolux Oven are:

• The Left Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue.
• The Electronic Surface Element Control User Interface Board is defective.

Try turning the Oven main power supply off for 1 minute. If the 36 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 37 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 37 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 37 Induction Cooktop Error will set if the control board detects Heat sink temperature sensor break, Induction Housing Assembly / Left side cooking zones

The most common issues that will cause an 37 Induction Cooktop Error to display on an Electrolux Oven are:

• The Left Side Generator Circuit Board is defective.

Try turning the Oven main power supply off for 1 minute. If the 37 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 39 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 39 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 39 Induction Cooktop Error will set if the control board detects Configuration mismatch between the ESEC-UIB and the Induction Housing Assembly.

The most common issues that will cause an 39 Induction Cooktop Error to display on an Electrolux Oven are:

• Disconnect power, wait 30 seconds and reapply power. If fault returns:
• Activate simultaneous both right front and right rear On/Off keys for 5 seconds (approx.), the error code should be replace by “8.8”.
• When “8.8” are shown on both left and right displays, release right side On/Off keys simultaneous active both left side front and rear On/Off keys for 5 seconds (approx.).
• Displays should the show walking dashes when the re configuration is executing. When displays turn off, the unit is ready to operate.
• If the reconfiguration described in steps 2 to 4 did not resolve the problem, replace the induction generator housing in the cooktop.

Try turning the Oven main power supply off for 1 minute. If the 39 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 51 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 51 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 51 Induction Cooktop Error will set if the control board detects Left front inductor temperature sensor break.

The most common issues that will cause an 51 Induction Cooktop Error to display on an Electrolux Oven are:

• The left Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 51 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 52 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 52 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 52 Induction Cooktop Error will set if the control board detects Left rear inductor temperature sensor break.

The most common issues that will cause an 52 Induction Cooktop Error to display on an Electrolux Oven are:

• The left Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 52 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 54 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 54 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 54 Induction Cooktop Error will set if the control board detects Right front inductor temperature sensor break.

The most common issues that will cause an 54 Induction Cooktop Error to display on an Electrolux Oven are:

• The right Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 54 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 55 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 55 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 55 Induction Cooktop Error will set if the control board detects Right rear inductor temperature sensor break.

The most common issues that will cause an 55 Induction Cooktop Error to display on an Electrolux Oven are:

• The right Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 55 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 61 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 61 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 61 Induction Cooktop Error will set if the control board detects Left front inductor temperature sensor too hot.

The most common issues that will cause an 61 Induction Cooktop Error to display on an Electrolux Oven are:

• The left Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 61 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 62 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 62 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 62 Induction Cooktop Error will set if the control board detects Left rear inductor temperature sensor too hot.

The most common issues that will cause an 62 Induction Cooktop Error to display on an Electrolux Oven are:

• The left Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 62 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 64 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 64 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 64 Induction Cooktop Error will set if the control board detects Right front inductor temperature sensor too hot.

The most common issues that will cause an 64 Induction Cooktop Error to display on an Electrolux Oven are:

• The right Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 64 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 65 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 65 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 65 Induction Cooktop Error will set if the control board detects Right rear inductor temperature sensor too hot.

The most common issues that will cause an 65 Induction Cooktop Error to display on an Electrolux Oven are:

• The right Generator Circuit Board is defective.
• The inductor is defective.

Try turning the Oven main power supply off for 1 minute. If the 65 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 70 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 70 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 70 Induction Cooktop Error will set if the control board detects AC input voltage too high, Induction Housing Assembly.

The most common issues that will cause an 70 Induction Cooktop Error to display on an Electrolux Oven are:

• Home power supply voltage issue.
• The Filter Circuit Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 70 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 71 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 71 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 71 Induction Cooktop Error will set if the control board detects Internal generator error. Sync, Induction Housing Assembly / Right side cooking zones.

The most common issues that will cause an 71 Induction Cooktop Error to display on an Electrolux Oven are:

• The Right Side Generator Circuit Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 71 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 72 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 72 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 72 Induction Cooktop Error will set if the control board detects Power Supply defect. Induction Housing Assembly / Right side cooking zones.

The most common issues that will cause an 72 Induction Cooktop Error to display on an Electrolux Oven are:

• The Right Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 72 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 73 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 73 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 73 Induction Cooktop Error will set if the control board detects Power Supply defect. Induction Housing Assembly / Right side cooking zones.

The most common issues that will cause an 73 Induction Cooktop Error to display on an Electrolux Oven are:

• The Right Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 73 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 74 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 74 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 74 Induction Cooktop Error will set if the control board detects Internal generator error. Communication, Induction Housing Assembly / Right side cooking zones.

The most common issues that will cause an 74 Induction Cooktop Error to display on an Electrolux Oven are:

• The Right Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.

Try turning the Oven main power supply off for 1 minute. If the 74 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 75 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 75 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 75 Induction Cooktop Error will set if the control board detects AC input voltage too low, Induction Housing Assembly.

The most common issues that will cause an 75 Induction Cooktop Error to display on an Electrolux Oven are:

• Home power supply voltage issue.
• The Filter Circuit Board is defective.
• Harness connection issue.

Try turning the Oven main power supply off for 1 minute. If the 75 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 76 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 76 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 76 Induction Cooktop Error will set if the control board detects Communication error. Induction Housing Assembly / Right side cooking zones.

The most common issues that will cause an 76 Induction Cooktop Error to display on an Electrolux Oven are:

• The Right Side Generator Circuit Board is defective.
• The Filter Circuit Board is defective.
• Harness connection issue between the Left Side Generator Circuit Board and the Filter Circuit Board.
• The Electronic Surface Element Control User Interface Board is defective.

Try turning the Oven main power supply off for 1 minute. If the 76 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does 77 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an 77 fault code, it is indicating a Induction Cooktop Error has been detected by the internal self diagnostics system.

An 77 Induction Cooktop Error will set if the control board detects Heat sink temperature sensor break, Induction Housing Assembly / Right side cooking zones.

The most common issues that will cause an 77 Induction Cooktop Error to display on an Electrolux Oven are:

• The Right Side Generator Circuit Board is defective.

Try turning the Oven main power supply off for 1 minute. If the 77 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E Electronic Surface Element Control Error will set if the control board detects Electronic Surface Element Control key display ribbon cable is disconnected or defective

The most common issues that will cause an E Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Glass Touch Control Panel is defective.
• Ribbon connection issue between the Electronic Surface Element Control User Interface Board and the Glass Touch Control Panel.

Try turning the Oven main power supply off for 1 minute. If the E code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E 11 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E 11 fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E 11 Electronic Surface Element Control Error will set if the control board detects Shorted Keypad

The most common issues that will cause an E 11 Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Glass Touch Control Panel is defective.
• Ribbon connection issue between the Electronic Surface Element Control User Interface Board and the Glass Touch Control Panel.

Try turning the Oven main power supply off for 1 minute. If the E 11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E 14 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E 14 fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E 14 Electronic Surface Element Control Error will set if the control board detects Electronic Surface Element Control key read ribbon cable is disconnected or defective

The most common issues that will cause an E 14 Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Glass Touch Control Panel is defective.
• Ribbon connection issue between the Electronic Surface Element Control User Interface Board and the Glass Touch Control Panel.

Try turning the Oven main power supply off for 1 minute. If the E 14 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E 15 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E 15 fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E 15 Electronic Surface Element Control Error will set if the control board detects Signal loss between Electronic Surface Element Control 30 UIB and Electronic Surface Element Control relay board.

The most common issues that will cause an E 15 Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Electronic Surface Element Control Relay Board is defective.
• Harness connection issue between the Electronic Surface Element Control User Interface Board and the Electronic Surface Element Control Relay Board.
• The Glass Touch Control Panel is defective.

Try turning the Oven main power supply off for 1 minute. If the E 15 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E013 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E013 fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E013 Electronic Surface Element Control Error will set if the control board detects Bad EEPROM.

The most common issues that will cause an E013 Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.

Try turning the Oven main power supply off for 1 minute. If the E013 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E014 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E014 fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E014 Electronic Surface Element Control Error will set if the control board detects Loss of Keyboard Tail.

The most common issues that will cause an E014 Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The left or right Rotary Hi Board is defective.
• Harness connection issue between the Electronic Surface Element Control User Interface Board and the left or right Rotary Hi Board.

Try turning the Oven main power supply off for 1 minute. If the E014 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does E015 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an E015 fault code, it is indicating a Electronic Surface Element Control Error has been detected by the internal self diagnostics system.

An E015 Electronic Surface Element Control Error will set if the control board detects ESEC self test failed.

The most common issues that will cause an E015 Electronic Surface Element Control Error to display on an Electrolux Oven are:

• The Electronic Surface Element Control User Interface Board is defective.
• The Electronic Surface Element Control Relay Board is defective.
• Harness connection issue between the Electronic Surface Element Control User Interface Board and the Electronic Surface Element Control Relay Board.

Try turning the Oven main power supply off for 1 minute. If the E015 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F1 fault code, it is indicating a Oven Control Error has been detected by the internal self diagnostics system.

An F1 Oven Control Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F1 Oven Control Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F1 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F2 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F2 fault code, it is indicating a Over Temperature Error has been detected by the internal self diagnostics system.

An F2 Over Temperature Error will set if the control board detects The oven has exceeded the max temperature.

The most common issues that will cause an F2 Over Temperature Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F2 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F3 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F3 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.

An F3 Temperature Sensor Error will set if the control board detects The oven temperature sensor is open.

The most common issues that will cause an F3 Temperature Sensor Error to display on an Electrolux Oven are:

• The oven temperature sensor is defective.
• The oven control PCB is defective.
• Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F3 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F4 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F4 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.

An F4 Temperature Sensor Error will set if the control board detects The oven temperature sensor is shorted.

The most common issues that will cause an F4 Temperature Sensor Error to display on an Electrolux Oven are:

• The oven temperature sensor is defective.
• The oven control PCB is defective.
• Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F4 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F5 EEPROM Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F5 EEPROM Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F5 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-00 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5-00 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F5-00 EEPROM Error will set if the control board detects No LinBUS master communiction.

The most common issues that will cause an F5-00 EEPROM Error to display on an Electrolux Oven are:

• The power board is defective.
• The electronic oven control is defective.
• Wiring issue between the power board and the electronic oven control.

Try turning the Oven main power supply off for 1 minute. If the F5-00 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-01 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5-01 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F5-01 Communication Error will set if the control board detects Power Board not communicating.

The most common issues that will cause an F5-01 Communication Error to display on an Electrolux Oven are:

• The power board is defective.
• The user interface board is defective.
• Wiring issue between the power board and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F5-01 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-02 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5-02 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F5-02 Communication Error will set if the control board detects The user interface board is not communicating.

The most common issues that will cause an F5-02 Communication Error to display on an Electrolux Oven are:

• The power board is defective.
• The user interface board is defective.
• Wiring issue between the power board and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F5-02 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-A0 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5-A0 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F5-A0 EEPROM Error will set if the control board detects Bad EEPROM checksum.

The most common issues that will cause an F5-A0 EEPROM Error to display on an Electrolux Oven are:

• The power board is defective.
• The electronic oven control is defective.
• Wiring issue between the power board and the electronic oven control.

Try turning the Oven main power supply off for 1 minute. If the F5-A0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-F0 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5-F0 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F5-F0 Communication Error will set if the control board detects Watchdog timer timed out – power board.

The most common issues that will cause an F5-F0 Communication Error to display on an Electrolux Oven are:

• The power board is defective.

Try turning the Oven main power supply off for 1 minute. If the F5-F0 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F5-FF mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F5-FF fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F5-FF Communication Error will set if the control board detects Watchdog timer timed out – user interface board.

The most common issues that will cause an F5-FF Communication Error to display on an Electrolux Oven are:

• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F5-FF code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F6 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F6 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F6 EEPROM Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F6 EEPROM Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F6 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F7 EEPROM Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F7 EEPROM Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-10 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-10 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-10 Potentiometer Error will set if the control board detects Potentiometer LF is open.

The most common issues that will cause an F7-10 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-10 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-11 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-11 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-11 Potentiometer Error will set if the control board detects Potentiometer LF is shorted.

The most common issues that will cause an F7-11 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-12 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-12 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-12 Potentiometer Error will set if the control board detects Potentiometer for LF is wrong value.

The most common issues that will cause an F7-12 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-20 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-20 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-20 Potentiometer Error will set if the control board detects Potentiometer LR is open.

The most common issues that will cause an F7-20 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-20 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-21 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-21 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-21 Potentiometer Error will set if the control board detects Potentiometer LR is shorted.

The most common issues that will cause an F7-21 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-21 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-22 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-22 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-22 Potentiometer Error will set if the control board detects Potentiometer for LR is wrong value.

The most common issues that will cause an F7-22 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-22 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-30 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-30 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-30 Potentiometer Error will set if the control board detects Potentiometer RR is open.

The most common issues that will cause an F7-30 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-30 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-31 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-31 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-31 Potentiometer Error will set if the control board detects Potentiometer RR is shorted.

The most common issues that will cause an F7-31 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-32 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-32 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-32 Potentiometer Error will set if the control board detects Potentiometer for RR is wrong value.

The most common issues that will cause an F7-32 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-32 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-40 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-40 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-40 Potentiometer Error will set if the control board detects Potentiometer RF is open.

The most common issues that will cause an F7-40 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-40 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-41 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-41 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-41 Potentiometer Error will set if the control board detects Potentiometer RF is shorted.

The most common issues that will cause an F7-41 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-41 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F7-42 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F7-42 fault code, it is indicating a Potentiometer Error has been detected by the internal self diagnostics system.

An F7-42 Potentiometer Error will set if the control board detects Potentiometer for RF is wrong value.

The most common issues that will cause an F7-42 Potentiometer Error to display on an Electrolux Oven are:

• The potentiometer is defective.
• The user interface board is defective.

Try turning the Oven main power supply off for 1 minute. If the F7-42 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F8 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F8 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F8 Door Lock Error will set if the control board detects The oven door lock is not functioning when initiated.

The most common issues that will cause an F8 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The oven control PCB is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F8 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F10 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F10 fault code, it is indicating a Over Temperature Error has been detected by the internal self diagnostics system.

An F10 Over Temperature Error will set if the control board detects The oven temperature has exceeded the maximum temperature.

The most common issues that will cause an F10 Over Temperature Error to display on an Electrolux Oven are:

• The oven temperature sensor is defective.
• The oven control PCB is defective.
• Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F10 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F11 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F11 fault code, it is indicating a Key Panel Error has been detected by the internal self diagnostics system.

An F11 Key Panel Error will set if the control board detects Any button is stuck or held for more than 30 seconds.

The most common issues that will cause an F11 Key Panel Error to display on an Electrolux Oven are:

• The keypad is defective.
• The oven control PCB is defective.
• Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F11 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F12 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F12 fault code, it is indicating a Control Panel Error has been detected by the internal self diagnostics system.

An F12 Control Panel Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F12 Control Panel Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F12 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F13 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F13 fault code, it is indicating a Control Panel Error has been detected by the internal self diagnostics system.

An F13 Control Panel Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F13 Control Panel Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F13 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F14 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F14 fault code, it is indicating a Key Panel Error has been detected by the internal self diagnostics system.

An F14 Key Panel Error will set if the control board detects TST Display tail missing or not connected.

The most common issues that will cause an F14 Key Panel Error to display on an Electrolux Oven are:

• The TST is defective.
• The oven control PCB is defective.
• Wiring issue between the TST and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F14 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F15 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F15 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F15 Communication Error will set if the control board detects There is a communication error between the relay board and the electronic oven control.

The most common issues that will cause an F15 Communication Error to display on an Electrolux Oven are:

• The relay board is defective.
• The electronic oven control is defective.
• Wiring issue between the relay board and the electronic oven control.

Try turning the Oven main power supply off for 1 minute. If the F15 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F20 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F20 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F20 Communication Error will set if the control board detects There is a communication error between the relay board and the electronic oven control.

The most common issues that will cause an F20 Communication Error to display on an Electrolux Oven are:

• The relay board is defective.
• The electronic oven control is defective.
• Wiring issue between the relay board and the electronic oven control.

Try turning the Oven main power supply off for 1 minute. If the F20 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F23 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F23 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F23 Communication Error will set if the control board detects There is a communication error between the variable speed control board and the electronic oven control.

The most common issues that will cause an F23 Communication Error to display on an Electrolux Oven are:

• The variable speed control board is defective.
• The electronic oven control is defective.
• Wiring issue between the variable speed control board and the electronic oven control.

Try turning the Oven main power supply off for 1 minute. If the F23 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F25 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F25 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F25 Communication Error will set if the control board detects There is a communication error between the variable speed control board and the electronic oven control.

The most common issues that will cause an F25 Communication Error to display on an Electrolux Oven are:

• The variable speed control board is defective.
• The electronic oven control is defective.
• Wiring issue between the variable speed control board and the electronic oven control.

Try turning the Oven main power supply off for 1 minute. If the F25 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F30 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F30 fault code, it is indicating a Probe Error has been detected by the internal self diagnostics system.

An F30 Probe Error will set if the control board detects The meat probe is open.

The most common issues that will cause an F30 Probe Error to display on an Electrolux Oven are:

• The meat probe is defective.
• The oven control PCB is defective.
• Wiring issue between the meat probe and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F30 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F31 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F31 fault code, it is indicating a Probe Error has been detected by the internal self diagnostics system.

An F31 Probe Error will set if the control board detects The meat probe is shorted.

The most common issues that will cause an F31 Probe Error to display on an Electrolux Oven are:

• The meat probe is defective.
• The oven control PCB is defective.
• Wiring issue between the meat probe and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F31 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F62 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F62 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F62 EEPROM Error will set if the control board detects Missing zero-cross signal

The most common issues that will cause an F62 EEPROM Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F62 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F90 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F90 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F90 Door Lock Error will set if the control board detects Maximum oven door unlock time exceeded.

The most common issues that will cause an F90 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The electronic oven control board is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F90 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F91 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F91 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F91 Door Lock Error will set if the control board detects Maximum oven door unlock attempts exceeded.

The most common issues that will cause an F91 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The electronic oven control board is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F91 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F92 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F92 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F92 Door Lock Error will set if the control board detects Maximum oven door open time exceeded.

The most common issues that will cause an F92 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The electronic oven control board is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F92 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F93 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F93 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F93 Door Lock Error will set if the control board detects Maximum oven door lock time exceeded.

The most common issues that will cause an F93 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The electronic oven control board is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F93 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F94 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F94 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F94 Door Lock Error will set if the control board detects Maximum oven door lock attempts exceeded.

The most common issues that will cause an F94 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The electronic oven control board is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F94 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F95 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F95 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F95 Door Lock Error will set if the control board detects Door motor mechanism failure. The motor does not stop rotating.

The most common issues that will cause an F95 Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The electronic oven control board is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F95 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F9X mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F9X fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F9X Door Lock Error will set if the control board detects The oven door lock is not functioning when initiated.

The most common issues that will cause an F9X Door Lock Error to display on an Electrolux Oven are:

• The door lock switch is defective.
• The door lock motor is defective.
• The oven control PCB is defective.
• Wiring issue between the door lock switch and the control PCB.
• Wiring issue between the door lock motor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F9X code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F01 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F01 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F01 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F01 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F01 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F02 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F02 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F02 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F02 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F02 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F03 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F03 fault code, it is indicating a User Interface Board Error has been detected by the internal self diagnostics system.

An F03 User Interface Board Error will set if the control board detects The oven user interface board is incorrectly configured.

The most common issues that will cause an F03 User Interface Board Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F03 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F04 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F04 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F04 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F04 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F04 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F001 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F001 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F001 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F001 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F001 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F002 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F002 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F002 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F002 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F002 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F003 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F003 fault code, it is indicating a User Interface Board Error has been detected by the internal self diagnostics system.

An F003 User Interface Board Error will set if the control board detects The oven user interface board is incorrectly configured.

The most common issues that will cause an F003 User Interface Board Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F003 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F004 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F004 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F004 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F004 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F004 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F005 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F005 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F005 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F005 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F005 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F010 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F010 fault code, it is indicating a Over Temperature Error has been detected by the internal self diagnostics system.

An F010 Over Temperature Error will set if the control board detects The oven temperature has exceeded the maximum temperature.

The most common issues that will cause an F010 Over Temperature Error to display on an Electrolux Oven are:

• The oven temperature sensor is defective.
• The oven control PCB is defective.
• Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F010 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F011 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F011 fault code, it is indicating a Touch Panel Error has been detected by the internal self diagnostics system.

An F011 Touch Panel Error will set if the control board detects Any button is stuck or held for more than 30 seconds.

The most common issues that will cause an F011 Touch Panel Error to display on an Electrolux Oven are:

• The keypad is defective.
• The oven control PCB is defective.
• Wiring issue between the keypad and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F011 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F012 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F012 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F012 Communication Error will set if the control board detects Keyboard configuration alarm: The oven user interface board received from the touch panel a key code that does not match the key map.

The most common issues that will cause an F012 Communication Error to display on an Electrolux Oven are:

• The glass touch panel is defective.
• The user interface board is defective.
• Wiring issue between the glass touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F012 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F013 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F013 fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F013 EEPROM Error will set if the control board detects Data written to non-volatile memory has failed verification

The most common issues that will cause an F013 EEPROM Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F013 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F015 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F015 fault code, it is indicating a Touch panel Error has been detected by the internal self diagnostics system.

An F015 Touch panel Error will set if the control board detects Touch panel internal failure

The most common issues that will cause an F015 Touch panel Error to display on an Electrolux Oven are:

• The touch panel is defective.
• The user interface board is defective.
• Wiring issue between the touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F015 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F017 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F017 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F017 Communication Error will set if the control board detects The oven user interface board is unable to configure the touch panel.

The most common issues that will cause an F017 Communication Error to display on an Electrolux Oven are:

• The glass touch panel is defective.
• The user interface board is defective.
• Wiring issue between the glass touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F017 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F018 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F018 fault code, it is indicating a Relay Board Error has been detected by the internal self diagnostics system.

An F018 Relay Board Error will set if the control board detects Oven relay board failure (wiggler).

The most common issues that will cause an F018 Relay Board Error to display on an Electrolux Oven are:

• The oven relay board is defective.

Try turning the Oven main power supply off for 1 minute. If the F018 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F019 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F019 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F019 Communication Error will set if the control board detects The oven user interface board is unable to configure the oven relay board

The most common issues that will cause an F019 Communication Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• The user interface board is defective.
• Wiring issue between the user interface board and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F019 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F022 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F022 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F022 Communication Error will set if the control board detects Communication failure between the oven user interface board and the oven relay board

The most common issues that will cause an F022 Communication Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• The user interface board is defective.
• Wiring issue between the user interface board and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F022 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F023 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F023 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F023 Communication Error will set if the control board detects Communication failure between the oven user interface board and the glass touch panel.

The most common issues that will cause an F023 Communication Error to display on an Electrolux Oven are:

• The glass touch panel is defective.
• The user interface board is defective.
• Wiring issue between the glass touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F023 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F025 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F025 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F025 Communication Error will set if the control board detects The communication between the oven user interface and the oven relay board cannot be initiated.

The most common issues that will cause an F025 Communication Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• The user interface board is defective.
• Wiring issue between the user interface board and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F025 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F027 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F027 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F027 Communication Error will set if the control board detects The communication between the oven user interface and the oven relay board cannot be initiated.

The most common issues that will cause an F027 Communication Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• The user interface board is defective.
• Wiring issue between the user interface board and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F027 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F028 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F028 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F028 Communication Error will set if the control board detects The communication between the oven user interface and the touch panel cannot be initiated.

The most common issues that will cause an F028 Communication Error to display on an Electrolux Oven are:

• The glass touch panel is defective.
• The user interface board is defective.
• Wiring issue between the glass touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F028 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F029 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F029 fault code, it is indicating a Communication Error has been detected by the internal self diagnostics system.

An F029 Communication Error will set if the control board detects The communication between the oven user interface and the touch panel cannot be initiated.

The most common issues that will cause an F029 Communication Error to display on an Electrolux Oven are:

• The glass touch panel is defective.
• The user interface board is defective.
• Wiring issue between the glass touch panel and the interface board.

Try turning the Oven main power supply off for 1 minute. If the F029 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F030 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F030 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.

An F030 Temperature Sensor Error will set if the control board detects The oven temperature sensor is open.

The most common issues that will cause an F030 Temperature Sensor Error to display on an Electrolux Oven are:

• The oven temperature sensor is defective.
• The oven control PCB is defective.
• Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F030 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F031 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F031 fault code, it is indicating a Temperature Sensor Error has been detected by the internal self diagnostics system.

An F031 Temperature Sensor Error will set if the control board detects The oven temperature sensor is shorted.

The most common issues that will cause an F031 Temperature Sensor Error to display on an Electrolux Oven are:

• The oven temperature sensor is defective.
• The oven control PCB is defective.
• Wiring issue between the oven temperature sensor and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F031 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F033 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F033 fault code, it is indicating a Probe Error has been detected by the internal self diagnostics system.

An F033 Probe Error will set if the control board detects Meat probe temperature sensor shorted or too hot

The most common issues that will cause an F033 Probe Error to display on an Electrolux Oven are:

• The meat probe is defective.
• The oven relay board is defective.
• Wiring issue between the meat probe and the control PCB.

Try turning the Oven main power supply off for 1 minute. If the F033 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F050 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F050 fault code, it is indicating a Relay Board Error has been detected by the internal self diagnostics system.

An F050 Relay Board Error will set if the control board detects The oven relay board is unable to read the status of the switches (door, MDL)

The most common issues that will cause an F050 Relay Board Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• One of the door latch switches are defective.
• Wiring issue between the door switches and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F050 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F090 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F090 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F090 Door Lock Error will set if the control board detects Motor Door Lock mechanism failure. The oven control does not see the Motor Door Lock running.

The most common issues that will cause an F090 Door Lock Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• One of the door latch switches are defective.
• Wiring issue between the door switches and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F090 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F095 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F095 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F095 Door Lock Error will set if the control board detects Motor Door Lock mechanism failure. The Motor Door Lock does not stop running or the Lock Switch sends an invalid signal.

The most common issues that will cause an F095 Door Lock Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• One of the door latch switches are defective.
• The door lock motor is defective.
• Wiring issue between the door switches or motor and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F095 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F096 mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F096 fault code, it is indicating a Door Lock Error has been detected by the internal self diagnostics system.

An F096 Door Lock Error will set if the control board detects The oven door has been detected open during a Self-Clean cycle.

The most common issues that will cause an F096 Door Lock Error to display on an Electrolux Oven are:

• The oven relay board is defective.
• The door switch is defective.
• Wiring issue between the door switch and the relay board.

Try turning the Oven main power supply off for 1 minute. If the F096 code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

What does F1X mean on an Electrolux Oven?

If your Electrolux Oven is displaying an F1X fault code, it is indicating a EEPROM Error has been detected by the internal self diagnostics system.

An F1X EEPROM Error will set if the control board detects There is an internal oven control panel issue.

The most common issues that will cause an F1X EEPROM Error to display on an Electrolux Oven are:

• The oven control board is defective.

Try turning the Oven main power supply off for 1 minute. If the F1X code returns after turning the power supply back on, the problem causing the fault will need to be repaired to clear the error

Electrolux Oven Error Codes Disclaimer

The Electrolux Oven Error Codes information contained on this page is provided for informational purposes only. ApplianceFaultCodes.com does not guarantee the information to be correct or give a proper diagnosis of any appliance. Always take proper safety precautions when installing or repairing any major appliance.